PWM driver configuration structure. More...
#include <nrfx_pwm.h>
Data Fields | |
| uint8_t | output_pins [NRF_PWM_CHANNEL_COUNT] |
| Pin numbers for individual output channels (optional). More... | |
| uint8_t | irq_priority |
| Interrupt priority. | |
| nrf_pwm_clk_t | base_clock |
| Base clock frequency. | |
| nrf_pwm_mode_t | count_mode |
| Operating mode of the pulse generator counter. | |
| uint16_t | top_value |
| Value up to which the pulse generator counter counts. | |
| nrf_pwm_dec_load_t | load_mode |
| Mode of loading sequence data from RAM. | |
| nrf_pwm_dec_step_t | step_mode |
| Mode of advancing the active sequence. | |
| bool | skip_gpio_cfg |
| Skip the GPIO configuration. More... | |
PWM driver configuration structure.
| uint8_t nrfx_pwm_config_t::output_pins[NRF_PWM_CHANNEL_COUNT] |
Pin numbers for individual output channels (optional).
Use NRFX_PWM_PIN_NOT_USED if a given output channel is not needed.
| bool nrfx_pwm_config_t::skip_gpio_cfg |
Skip the GPIO configuration.
When this flag is set, the user is responsible for providing the proper configuration of the output pins, as the driver does not touch it at all.