Hardware access layer for managing the Pulse Width Modulation (PWM) peripheral. More...

Data Structures
struct	nrf_pwm_values_grouped_t
	Structure for defining duty cycle values for a sequence loaded in NRF_PWM_LOAD_GROUPED mode. More...

struct	nrf_pwm_values_individual_t
	Structure for defining duty cycle values for a sequence loaded in NRF_PWM_LOAD_INDIVIDUAL mode. More...

struct	nrf_pwm_values_wave_form_t
	Structure for defining duty cycle values for a sequence loaded in NRF_PWM_LOAD_WAVE_FORM mode. More...

union	nrf_pwm_values_t
	Union grouping pointers to arrays of duty cycle values applicable to various loading modes. More...

struct	nrf_pwm_sequence_t
	Structure for defining a sequence of PWM duty cycles. More...

Macros
#define	NRF_PWM_PIN_NOT_CONNECTED 0xFFFFFFFF
	This value can be provided as a parameter for the nrf_pwm_pins_set function call to specify that a given output channel shall not be connected to a physical pin.

#define	NRF_PWM_CHANNEL_COUNT 4
	Number of channels in each PWM instance.

#define	NRF_PWM_VALUES_LENGTH(array) (sizeof(array) / sizeof(uint16_t))
	Helper macro for calculating the number of 16-bit values in the specified array of duty cycle values.

Typedefs
typedef uint16_t	nrf_pwm_values_common_t
	Type used for defining duty cycle values for a sequence loaded in NRF_PWM_LOAD_COMMON mode.

Enumerations
enum	nrf_pwm_task_t { NRF_PWM_TASK_STOP = offsetof(NRF_PWM_Type, TASKS_STOP), NRF_PWM_TASK_SEQSTART0 = offsetof(NRF_PWM_Type, TASKS_SEQSTART[0]), NRF_PWM_TASK_SEQSTART1 = offsetof(NRF_PWM_Type, TASKS_SEQSTART[1]), NRF_PWM_TASK_NEXTSTEP = offsetof(NRF_PWM_Type, TASKS_NEXTSTEP) }
	PWM tasks. More...

enum	nrf_pwm_event_t { NRF_PWM_EVENT_STOPPED = offsetof(NRF_PWM_Type, EVENTS_STOPPED), NRF_PWM_EVENT_SEQSTARTED0 = offsetof(NRF_PWM_Type, EVENTS_SEQSTARTED[0]), NRF_PWM_EVENT_SEQSTARTED1 = offsetof(NRF_PWM_Type, EVENTS_SEQSTARTED[1]), NRF_PWM_EVENT_SEQEND0 = offsetof(NRF_PWM_Type, EVENTS_SEQEND[0]), NRF_PWM_EVENT_SEQEND1 = offsetof(NRF_PWM_Type, EVENTS_SEQEND[1]), NRF_PWM_EVENT_PWMPERIODEND = offsetof(NRF_PWM_Type, EVENTS_PWMPERIODEND), NRF_PWM_EVENT_LOOPSDONE = offsetof(NRF_PWM_Type, EVENTS_LOOPSDONE) }
	PWM events. More...

enum	nrf_pwm_int_mask_t { NRF_PWM_INT_STOPPED_MASK = PWM_INTENSET_STOPPED_Msk, NRF_PWM_INT_SEQSTARTED0_MASK = PWM_INTENSET_SEQSTARTED0_Msk, NRF_PWM_INT_SEQSTARTED1_MASK = PWM_INTENSET_SEQSTARTED1_Msk, NRF_PWM_INT_SEQEND0_MASK = PWM_INTENSET_SEQEND0_Msk, NRF_PWM_INT_SEQEND1_MASK = PWM_INTENSET_SEQEND1_Msk, NRF_PWM_INT_PWMPERIODEND_MASK = PWM_INTENSET_PWMPERIODEND_Msk, NRF_PWM_INT_LOOPSDONE_MASK = PWM_INTENSET_LOOPSDONE_Msk }
	PWM interrupts. More...

enum	nrf_pwm_short_mask_t { NRF_PWM_SHORT_SEQEND0_STOP_MASK = PWM_SHORTS_SEQEND0_STOP_Msk, NRF_PWM_SHORT_SEQEND1_STOP_MASK = PWM_SHORTS_SEQEND1_STOP_Msk, NRF_PWM_SHORT_LOOPSDONE_SEQSTART0_MASK = PWM_SHORTS_LOOPSDONE_SEQSTART0_Msk, NRF_PWM_SHORT_LOOPSDONE_SEQSTART1_MASK = PWM_SHORTS_LOOPSDONE_SEQSTART1_Msk, NRF_PWM_SHORT_LOOPSDONE_STOP_MASK = PWM_SHORTS_LOOPSDONE_STOP_Msk }
	PWM shortcuts. More...

enum	nrf_pwm_mode_t { NRF_PWM_MODE_UP = PWM_MODE_UPDOWN_Up, NRF_PWM_MODE_UP_AND_DOWN = PWM_MODE_UPDOWN_UpAndDown }
	PWM modes of operation. More...

enum	nrf_pwm_clk_t { NRF_PWM_CLK_16MHz = PWM_PRESCALER_PRESCALER_DIV_1, NRF_PWM_CLK_8MHz = PWM_PRESCALER_PRESCALER_DIV_2, NRF_PWM_CLK_4MHz = PWM_PRESCALER_PRESCALER_DIV_4, NRF_PWM_CLK_2MHz = PWM_PRESCALER_PRESCALER_DIV_8, NRF_PWM_CLK_1MHz = PWM_PRESCALER_PRESCALER_DIV_16, NRF_PWM_CLK_500kHz = PWM_PRESCALER_PRESCALER_DIV_32, NRF_PWM_CLK_250kHz = PWM_PRESCALER_PRESCALER_DIV_64, NRF_PWM_CLK_125kHz = PWM_PRESCALER_PRESCALER_DIV_128 }
	PWM base clock frequencies. More...

enum	nrf_pwm_dec_load_t { NRF_PWM_LOAD_COMMON = PWM_DECODER_LOAD_Common, NRF_PWM_LOAD_GROUPED = PWM_DECODER_LOAD_Grouped, NRF_PWM_LOAD_INDIVIDUAL = PWM_DECODER_LOAD_Individual, NRF_PWM_LOAD_WAVE_FORM = PWM_DECODER_LOAD_WaveForm }
	PWM decoder load modes. More...

enum	nrf_pwm_dec_step_t { NRF_PWM_STEP_AUTO = PWM_DECODER_MODE_RefreshCount, NRF_PWM_STEP_TRIGGERED = PWM_DECODER_MODE_NextStep }
	PWM decoder next step modes. More...

Functions
NRF_STATIC_INLINE void	nrf_pwm_task_trigger (NRF_PWM_Type *p_reg, nrf_pwm_task_t task)
	Function for activating the specified PWM task. More...

NRF_STATIC_INLINE uint32_t	nrf_pwm_task_address_get (NRF_PWM_Type const *p_reg, nrf_pwm_task_t task)
	Function for getting the address of the specified PWM task register. More...

NRF_STATIC_INLINE void	nrf_pwm_event_clear (NRF_PWM_Type *p_reg, nrf_pwm_event_t event)
	Function for clearing the specified PWM event. More...

NRF_STATIC_INLINE bool	nrf_pwm_event_check (NRF_PWM_Type const *p_reg, nrf_pwm_event_t event)
	Function for retrieving the state of the PWM event. More...

NRF_STATIC_INLINE uint32_t	nrf_pwm_event_address_get (NRF_PWM_Type const *p_reg, nrf_pwm_event_t event)
	Function for getting the address of the specified PWM event register. More...

NRF_STATIC_INLINE void	nrf_pwm_shorts_enable (NRF_PWM_Type *p_reg, uint32_t mask)
	Function for enabling the specified shortcuts. More...

NRF_STATIC_INLINE void	nrf_pwm_shorts_disable (NRF_PWM_Type *p_reg, uint32_t mask)
	Function for disabling the specified shortcuts. More...

NRF_STATIC_INLINE void	nrf_pwm_shorts_set (NRF_PWM_Type *p_reg, uint32_t mask)
	Function for setting the configuration of PWM shortcuts. More...

NRF_STATIC_INLINE void	nrf_pwm_int_enable (NRF_PWM_Type *p_reg, uint32_t mask)
	Function for enabling specified interrupts. More...

NRF_STATIC_INLINE void	nrf_pwm_int_disable (NRF_PWM_Type *p_reg, uint32_t mask)
	Function for disabling specified interrupts. More...

NRF_STATIC_INLINE void	nrf_pwm_int_set (NRF_PWM_Type *p_reg, uint32_t mask)
	Function for setting the configuration of PWM interrupts. More...

NRF_STATIC_INLINE uint32_t	nrf_pwm_int_enable_check (NRF_PWM_Type const *p_reg, uint32_t mask)
	Function for checking if the specified interrupts are enabled. More...

NRF_STATIC_INLINE void	nrf_pwm_subscribe_set (NRF_PWM_Type *p_reg, nrf_pwm_task_t task, uint8_t channel)
	Function for setting the subscribe configuration for a given PWM task. More...

NRF_STATIC_INLINE void	nrf_pwm_subscribe_clear (NRF_PWM_Type *p_reg, nrf_pwm_task_t task)
	Function for clearing the subscribe configuration for a given PWM task. More...

NRF_STATIC_INLINE void	nrf_pwm_publish_set (NRF_PWM_Type *p_reg, nrf_pwm_event_t event, uint8_t channel)
	Function for setting the publish configuration for a given PWM event. More...

NRF_STATIC_INLINE void	nrf_pwm_publish_clear (NRF_PWM_Type *p_reg, nrf_pwm_event_t event)
	Function for clearing the publish configuration for a given PWM event. More...

NRF_STATIC_INLINE void	nrf_pwm_enable (NRF_PWM_Type *p_reg)
	Function for enabling the PWM peripheral. More...

NRF_STATIC_INLINE void	nrf_pwm_disable (NRF_PWM_Type *p_reg)
	Function for disabling the PWM peripheral. More...

NRF_STATIC_INLINE void	nrf_pwm_pins_set (NRF_PWM_Type *p_reg, uint32_t out_pins[4])
	Function for assigning pins to PWM output channels. More...

NRF_STATIC_INLINE uint32_t	nrf_pwm_pin_get (NRF_PWM_Type const *p_reg, uint8_t channel)
	Function for getting pin selection associated with specified PWM output channel. More...

NRF_STATIC_INLINE void	nrf_pwm_configure (NRF_PWM_Type *p_reg, nrf_pwm_clk_t base_clock, nrf_pwm_mode_t mode, uint16_t top_value)
	Function for configuring the PWM peripheral. More...

NRF_STATIC_INLINE void	nrf_pwm_sequence_set (NRF_PWM_Type p_reg, uint8_t seq_id, nrf_pwm_sequence_t const p_seq)
	Function for defining a sequence of PWM duty cycles. More...

NRF_STATIC_INLINE void	nrf_pwm_seq_ptr_set (NRF_PWM_Type p_reg, uint8_t seq_id, uint16_t const p_values)
	Function for modifying the pointer to the duty cycle values in the specified sequence. More...

NRF_STATIC_INLINE void	nrf_pwm_seq_cnt_set (NRF_PWM_Type *p_reg, uint8_t seq_id, uint16_t length)
	Function for modifying the total number of duty cycle values in the specified sequence. More...

NRF_STATIC_INLINE void	nrf_pwm_seq_refresh_set (NRF_PWM_Type *p_reg, uint8_t seq_id, uint32_t refresh)
	Function for modifying the additional number of PWM periods spent on each duty cycle value in the specified sequence. More...

NRF_STATIC_INLINE void	nrf_pwm_seq_end_delay_set (NRF_PWM_Type *p_reg, uint8_t seq_id, uint32_t end_delay)
	Function for modifying the additional time added after the sequence is played. More...

NRF_STATIC_INLINE void	nrf_pwm_decoder_set (NRF_PWM_Type *p_reg, nrf_pwm_dec_load_t dec_load, nrf_pwm_dec_step_t dec_step)
	Function for setting the mode of loading sequence data from RAM and advancing the sequence. More...

NRF_STATIC_INLINE void	nrf_pwm_loop_set (NRF_PWM_Type *p_reg, uint16_t loop_count)
	Function for setting the number of times the sequence playback should be performed. More...

Detailed Description

Hardware access layer for managing the Pulse Width Modulation (PWM) peripheral.

Enumeration Type Documentation

◆ nrf_pwm_clk_t

enum nrf_pwm_clk_t

PWM base clock frequencies.

Enumerator
NRF_PWM_CLK_16MHz	16 MHz / 1 = 16 MHz.
NRF_PWM_CLK_8MHz	16 MHz / 2 = 8 MHz.
NRF_PWM_CLK_4MHz	16 MHz / 4 = 4 MHz.
NRF_PWM_CLK_2MHz	16 MHz / 8 = 2 MHz.
NRF_PWM_CLK_1MHz	16 MHz / 16 = 1 MHz.
NRF_PWM_CLK_500kHz	16 MHz / 32 = 500 kHz.
NRF_PWM_CLK_250kHz	16 MHz / 64 = 250 kHz.
NRF_PWM_CLK_125kHz	16 MHz / 128 = 125 kHz.

◆ nrf_pwm_dec_load_t

enum nrf_pwm_dec_load_t

PWM decoder load modes.

The selected mode determines how the sequence data is read from RAM and spread to the compare registers.

Enumerator
NRF_PWM_LOAD_COMMON	1st half word (16-bit) used in all PWM channels (0-3).
NRF_PWM_LOAD_GROUPED	1st half word (16-bit) used in channels 0 and 1; 2nd word in channels 2 and 3.
NRF_PWM_LOAD_INDIVIDUAL	1st half word (16-bit) used in channel 0; 2nd in channel 1; 3rd in channel 2; 4th in channel 3.
NRF_PWM_LOAD_WAVE_FORM	1st half word (16-bit) used in channel 0; 2nd in channel 1; ... ; 4th as the top value for the pulse generator counter.

◆ nrf_pwm_dec_step_t

enum nrf_pwm_dec_step_t

PWM decoder next step modes.

The selected mode determines when the next value from the active sequence is loaded.

Enumerator
NRF_PWM_STEP_AUTO	Automatically after the current value is played and repeated the requested number of times.
NRF_PWM_STEP_TRIGGERED	When the NRF_PWM_TASK_NEXTSTEP task is triggered.

◆ nrf_pwm_event_t

enum nrf_pwm_event_t

PWM events.

Enumerator
NRF_PWM_EVENT_STOPPED	Response to STOP task, emitted when PWM pulses are no longer generated.
NRF_PWM_EVENT_SEQSTARTED0	First PWM period started on sequence 0.
NRF_PWM_EVENT_SEQSTARTED1	First PWM period started on sequence 1.
NRF_PWM_EVENT_SEQEND0	Emitted at the end of every sequence 0 when its last value has been read from RAM.
NRF_PWM_EVENT_SEQEND1	Emitted at the end of every sequence 1 when its last value has been read from RAM.
NRF_PWM_EVENT_PWMPERIODEND	Emitted at the end of each PWM period.
NRF_PWM_EVENT_LOOPSDONE	Concatenated sequences have been played the specified number of times.

◆ nrf_pwm_int_mask_t

enum nrf_pwm_int_mask_t

PWM interrupts.

Enumerator
NRF_PWM_INT_STOPPED_MASK	Interrupt on STOPPED event.
NRF_PWM_INT_SEQSTARTED0_MASK	Interrupt on SEQSTARTED[0] event.
NRF_PWM_INT_SEQSTARTED1_MASK	Interrupt on SEQSTARTED[1] event.
NRF_PWM_INT_SEQEND0_MASK	Interrupt on SEQEND[0] event.
NRF_PWM_INT_SEQEND1_MASK	Interrupt on SEQEND[1] event.
NRF_PWM_INT_PWMPERIODEND_MASK	Interrupt on PWMPERIODEND event.
NRF_PWM_INT_LOOPSDONE_MASK	Interrupt on LOOPSDONE event.

◆ nrf_pwm_mode_t

enum nrf_pwm_mode_t

PWM modes of operation.

Enumerator
NRF_PWM_MODE_UP	Up counter (edge-aligned PWM duty cycle).
NRF_PWM_MODE_UP_AND_DOWN	Up and down counter (center-aligned PWM duty cycle).

◆ nrf_pwm_short_mask_t

enum nrf_pwm_short_mask_t

PWM shortcuts.

Enumerator
NRF_PWM_SHORT_SEQEND0_STOP_MASK	Shortcut between SEQEND[0] event and STOP task.
NRF_PWM_SHORT_SEQEND1_STOP_MASK	Shortcut between SEQEND[1] event and STOP task.
NRF_PWM_SHORT_LOOPSDONE_SEQSTART0_MASK	Shortcut between LOOPSDONE event and SEQSTART[0] task.
NRF_PWM_SHORT_LOOPSDONE_SEQSTART1_MASK	Shortcut between LOOPSDONE event and SEQSTART[1] task.
NRF_PWM_SHORT_LOOPSDONE_STOP_MASK	Shortcut between LOOPSDONE event and STOP task.

◆ nrf_pwm_task_t

enum nrf_pwm_task_t

PWM tasks.

Enumerator
NRF_PWM_TASK_STOP	Stops PWM pulse generation on all channels at the end of the current PWM period, and stops the sequence playback.
NRF_PWM_TASK_SEQSTART0	Starts playback of sequence 0.
NRF_PWM_TASK_SEQSTART1	Starts playback of sequence 1.
NRF_PWM_TASK_NEXTSTEP	Steps by one value in the current sequence if the decoder is set to NRF_PWM_STEP_TRIGGERED mode.

Function Documentation

◆ nrf_pwm_configure()

NRF_STATIC_INLINE void nrf_pwm_configure	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_clk_t	base_clock,
		nrf_pwm_mode_t	mode,
		uint16_t	top_value
	)

Function for configuring the PWM peripheral.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	base_clock	Base clock frequency.
[in]	mode	Operating mode of the pulse generator counter.
[in]	top_value	Value up to which the pulse generator counter counts.

◆ nrf_pwm_decoder_set()

NRF_STATIC_INLINE void nrf_pwm_decoder_set	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_dec_load_t	dec_load,
		nrf_pwm_dec_step_t	dec_step
	)

Function for setting the mode of loading sequence data from RAM and advancing the sequence.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	dec_load	Mode of loading sequence data from RAM.
[in]	dec_step	Mode of advancing the active sequence.

◆ nrf_pwm_disable()

NRF_STATIC_INLINE void nrf_pwm_disable ( NRF_PWM_Type * p_reg )

Function for disabling the PWM peripheral.

Parameters

[in] p_reg Pointer to the structure of registers of the peripheral.

◆ nrf_pwm_enable()

NRF_STATIC_INLINE void nrf_pwm_enable ( NRF_PWM_Type * p_reg )

Function for enabling the PWM peripheral.

Parameters

[in] p_reg Pointer to the structure of registers of the peripheral.

◆ nrf_pwm_event_address_get()

NRF_STATIC_INLINE uint32_t nrf_pwm_event_address_get	(	NRF_PWM_Type const *	p_reg,
		nrf_pwm_event_t	event
	)

Function for getting the address of the specified PWM event register.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	event	PWM event.

Returns: Address of the specified event register.

◆ nrf_pwm_event_check()

NRF_STATIC_INLINE bool nrf_pwm_event_check	(	NRF_PWM_Type const *	p_reg,
		nrf_pwm_event_t	event
	)

Function for retrieving the state of the PWM event.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	event	Event to be checked.

Return values

true	The event has been generated.
false	The event has not been generated.

◆ nrf_pwm_event_clear()

NRF_STATIC_INLINE void nrf_pwm_event_clear	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_event_t	event
	)

Function for clearing the specified PWM event.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	event	Event to clear.

◆ nrf_pwm_int_disable()

NRF_STATIC_INLINE void nrf_pwm_int_disable	(	NRF_PWM_Type *	p_reg,
		uint32_t	mask
	)

Function for disabling specified interrupts.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	mask	Mask of interrupts to be disabled.

◆ nrf_pwm_int_enable()

NRF_STATIC_INLINE void nrf_pwm_int_enable	(	NRF_PWM_Type *	p_reg,
		uint32_t	mask
	)

Function for enabling specified interrupts.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	mask	Mask of interrupts to be enabled.

◆ nrf_pwm_int_enable_check()

NRF_STATIC_INLINE uint32_t nrf_pwm_int_enable_check	(	NRF_PWM_Type const *	p_reg,
		uint32_t	mask
	)

Function for checking if the specified interrupts are enabled.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	mask	Mask of interrupts to be checked.

Returns: Mask of enabled interrupts.

◆ nrf_pwm_int_set()

NRF_STATIC_INLINE void nrf_pwm_int_set	(	NRF_PWM_Type *	p_reg,
		uint32_t	mask
	)

Function for setting the configuration of PWM interrupts.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	mask	Mask of interrupts to be set.

◆ nrf_pwm_loop_set()

NRF_STATIC_INLINE void nrf_pwm_loop_set	(	NRF_PWM_Type *	p_reg,
		uint16_t	loop_count
	)

Function for setting the number of times the sequence playback should be performed.

This function applies to two-sequence playback (concatenated sequence 0 and 1). A single sequence can be played back only once.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	loop_count	Number of times to perform the sequence playback.

◆ nrf_pwm_pin_get()

NRF_STATIC_INLINE uint32_t nrf_pwm_pin_get	(	NRF_PWM_Type const *	p_reg,
		uint8_t	channel
	)

Function for getting pin selection associated with specified PWM output channel.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	channel	PWM output channel.

Returns: Pin selection associated with specified PWM output channel.

◆ nrf_pwm_pins_set()

NRF_STATIC_INLINE void nrf_pwm_pins_set	(	NRF_PWM_Type *	p_reg,
		uint32_t	out_pins[4]
	)

Function for assigning pins to PWM output channels.

Usage of all PWM output channels is optional. If a given channel is not needed, pass the NRF_PWM_PIN_NOT_CONNECTED value instead of its pin number.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	out_pins	Array with pin numbers for individual PWM output channels.

◆ nrf_pwm_publish_clear()

NRF_STATIC_INLINE void nrf_pwm_publish_clear	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_event_t	event
	)

Function for clearing the publish configuration for a given PWM event.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	event	Event for which to clear the configuration.

◆ nrf_pwm_publish_set()

NRF_STATIC_INLINE void nrf_pwm_publish_set	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_event_t	event,
		uint8_t	channel
	)

Function for setting the publish configuration for a given PWM event.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	event	Event for which to set the configuration.
[in]	channel	Channel through which to publish the event.

◆ nrf_pwm_seq_cnt_set()

NRF_STATIC_INLINE void nrf_pwm_seq_cnt_set	(	NRF_PWM_Type *	p_reg,
		uint8_t	seq_id,
		uint16_t	length
	)

Function for modifying the total number of duty cycle values in the specified sequence.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	seq_id	Identifier of the sequence (0 or 1).
[in]	length	Number of duty cycle values.

◆ nrf_pwm_seq_end_delay_set()

NRF_STATIC_INLINE void nrf_pwm_seq_end_delay_set	(	NRF_PWM_Type *	p_reg,
		uint8_t	seq_id,
		uint32_t	end_delay
	)

Function for modifying the additional time added after the sequence is played.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	seq_id	Identifier of the sequence (0 or 1).
[in]	end_delay	Number of PWM periods added at the end of the sequence.

◆ nrf_pwm_seq_ptr_set()

NRF_STATIC_INLINE void nrf_pwm_seq_ptr_set	(	NRF_PWM_Type *	p_reg,
		uint8_t	seq_id,
		uint16_t const *	p_values
	)

Function for modifying the pointer to the duty cycle values in the specified sequence.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	seq_id	Identifier of the sequence (0 or 1).
[in]	p_values	Pointer to an array with duty cycle values.

◆ nrf_pwm_seq_refresh_set()

NRF_STATIC_INLINE void nrf_pwm_seq_refresh_set	(	NRF_PWM_Type *	p_reg,
		uint8_t	seq_id,
		uint32_t	refresh
	)

Function for modifying the additional number of PWM periods spent on each duty cycle value in the specified sequence.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	seq_id	Identifier of the sequence (0 or 1).
[in]	refresh	Number of additional PWM periods for each duty cycle value.

◆ nrf_pwm_sequence_set()

NRF_STATIC_INLINE void nrf_pwm_sequence_set	(	NRF_PWM_Type *	p_reg,
		uint8_t	seq_id,
		nrf_pwm_sequence_t const *	p_seq
	)

Function for defining a sequence of PWM duty cycles.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	seq_id	Identifier of the sequence (0 or 1).
[in]	p_seq	Pointer to the sequence definition.

◆ nrf_pwm_shorts_disable()

NRF_STATIC_INLINE void nrf_pwm_shorts_disable	(	NRF_PWM_Type *	p_reg,
		uint32_t	mask
	)

Function for disabling the specified shortcuts.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	mask	Mask of shortcuts to be disabled.

◆ nrf_pwm_shorts_enable()

NRF_STATIC_INLINE void nrf_pwm_shorts_enable	(	NRF_PWM_Type *	p_reg,
		uint32_t	mask
	)

Function for enabling the specified shortcuts.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	mask	Mask of shortcuts to be enabled.

◆ nrf_pwm_shorts_set()

NRF_STATIC_INLINE void nrf_pwm_shorts_set	(	NRF_PWM_Type *	p_reg,
		uint32_t	mask
	)

Function for setting the configuration of PWM shortcuts.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	mask	Shortcuts configuration to be set.

◆ nrf_pwm_subscribe_clear()

NRF_STATIC_INLINE void nrf_pwm_subscribe_clear	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_task_t	task
	)

Function for clearing the subscribe configuration for a given PWM task.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	task	Task for which to clear the configuration.

◆ nrf_pwm_subscribe_set()

NRF_STATIC_INLINE void nrf_pwm_subscribe_set	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_task_t	task,
		uint8_t	channel
	)

Function for setting the subscribe configuration for a given PWM task.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	task	Task for which to set the configuration.
[in]	channel	Channel through which to subscribe events.

◆ nrf_pwm_task_address_get()

NRF_STATIC_INLINE uint32_t nrf_pwm_task_address_get	(	NRF_PWM_Type const *	p_reg,
		nrf_pwm_task_t	task
	)

Function for getting the address of the specified PWM task register.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	task	PWM task.

Returns: Address of the specified task register.

◆ nrf_pwm_task_trigger()

NRF_STATIC_INLINE void nrf_pwm_task_trigger	(	NRF_PWM_Type *	p_reg,
		nrf_pwm_task_t	task
	)

Function for activating the specified PWM task.

Parameters

[in]	p_reg	Pointer to the structure of registers of the peripheral.
[in]	task	Task to be activated.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

◆ nrf_pwm_clk_t

◆ nrf_pwm_dec_load_t

◆ nrf_pwm_dec_step_t

◆ nrf_pwm_event_t

◆ nrf_pwm_int_mask_t

◆ nrf_pwm_mode_t

◆ nrf_pwm_short_mask_t

◆ nrf_pwm_task_t

Function Documentation

◆ nrf_pwm_configure()

◆ nrf_pwm_decoder_set()

◆ nrf_pwm_disable()

◆ nrf_pwm_enable()

◆ nrf_pwm_event_address_get()

◆ nrf_pwm_event_check()

◆ nrf_pwm_event_clear()

◆ nrf_pwm_int_disable()

◆ nrf_pwm_int_enable()

◆ nrf_pwm_int_enable_check()

◆ nrf_pwm_int_set()

◆ nrf_pwm_loop_set()

◆ nrf_pwm_pin_get()

◆ nrf_pwm_pins_set()

◆ nrf_pwm_publish_clear()

◆ nrf_pwm_publish_set()

◆ nrf_pwm_seq_cnt_set()

◆ nrf_pwm_seq_end_delay_set()

◆ nrf_pwm_seq_ptr_set()

◆ nrf_pwm_seq_refresh_set()

◆ nrf_pwm_sequence_set()

◆ nrf_pwm_shorts_disable()

◆ nrf_pwm_shorts_enable()

◆ nrf_pwm_shorts_set()

◆ nrf_pwm_subscribe_clear()

◆ nrf_pwm_subscribe_set()

◆ nrf_pwm_task_address_get()

◆ nrf_pwm_task_trigger()