ZDO address discovery

Data Structures
struct	zb_zdo_nwk_addr_req_s
	NWK_addr_req command primitive. More...
struct	zb_zdo_nwk_addr_req_param_s
	Parameters for nwk_addr_req command. More...
struct	zb_zdo_nwk_addr_resp_head_s
	NWK_addr_req response frame. More...
struct	zb_zdo_nwk_addr_resp_ext_s
	NWK_addr_req response frame tail. More...
struct	zb_zdo_nwk_addr_resp_ext2_s
	NWK_addr_req response frame tail. More...
struct	zb_zdo_ieee_addr_req_s
	Parameters of IEEE_addr_req primitive. More...
struct	zb_zdo_ieee_addr_req_param_s
	Parameters for ieee_addr_req command. More...
struct	zb_zdo_ieee_addr_resp_s
struct	zb_zdo_ieee_addr_resp_ext_s
	ZDO IEEE address response frame tail. More...
struct	zb_zdo_ieee_addr_resp_ext2_s
	ZDO IEEE address response frame tail. More...

Macros
#define	ZB_ZDO_SINGLE_DEVICE_RESP   0U
#define	ZB_ZDO_EXTENDED_DEVICE_RESP   1U

Typedefs
typedef struct zb_zdo_nwk_addr_req_s	zb_zdo_nwk_addr_req_t
	NWK_addr_req command primitive.
typedef struct zb_zdo_nwk_addr_req_param_s	zb_zdo_nwk_addr_req_param_t
	Parameters for nwk_addr_req command.
typedef struct zb_zdo_nwk_addr_resp_head_s	zb_zdo_nwk_addr_resp_head_t
	NWK_addr_req response frame.
typedef struct zb_zdo_nwk_addr_resp_ext_s	zb_zdo_nwk_addr_resp_ext_t
	NWK_addr_req response frame tail.
typedef struct zb_zdo_nwk_addr_resp_ext2_s	zb_zdo_nwk_addr_resp_ext2_t
	NWK_addr_req response frame tail.
typedef struct zb_zdo_ieee_addr_req_s	zb_zdo_ieee_addr_req_t
	Parameters of IEEE_addr_req primitive. More...
typedef struct zb_zdo_ieee_addr_req_param_s	zb_zdo_ieee_addr_req_param_t
	Parameters for ieee_addr_req command.
typedef struct zb_zdo_ieee_addr_resp_s	zb_zdo_ieee_addr_resp_t
typedef struct zb_zdo_ieee_addr_resp_ext_s	zb_zdo_ieee_addr_resp_ext_t
	ZDO IEEE address response frame tail.
typedef struct zb_zdo_ieee_addr_resp_ext2_s	zb_zdo_ieee_addr_resp_ext2_t
	ZDO IEEE address response frame tail.

Functions
zb_uint8_t	zb_zdo_nwk_addr_req (zb_uint8_t param, zb_callback_t cb)
	Sends NWK_addr_req primitive. More...
zb_uint8_t	zb_zdo_ieee_addr_req (zb_uint8_t param, zb_callback_t cb)
	IEEE_addr_req primitive. More...

Detailed Description

Macro Definition Documentation

#define ZB_ZDO_EXTENDED_DEVICE_RESP   1U

Request Type parameter value of zb_zdo_nwk_addr_req_t and zb_zdo_ieee_addr_req_t for receiving an Extended device response used in the following commands accordingly:

• zb_zdo_nwk_addr_req
• zb_zdo_ieee_addr_req_t

  See also

  spec 2.4.3.1, 2.4.4.1

#define ZB_ZDO_SINGLE_DEVICE_RESP   0U

Request Type parameter value of zb_zdo_nwk_addr_req_t and zb_zdo_ieee_addr_req_t for receiving a Single device response used in the following commands accordingly:

• zb_zdo_nwk_addr_req
• zb_zdo_ieee_addr_req

  See also

  spec 2.4.3.1, 2.4.4.1

Typedef Documentation

typedef struct zb_zdo_ieee_addr_req_s zb_zdo_ieee_addr_req_t

Parameters of IEEE_addr_req primitive.

To be put into buffer as data (means - after space alloc).

typedef struct zb_zdo_ieee_addr_resp_s zb_zdo_ieee_addr_resp_t

brief ZDO IEEE address response frame

Function Documentation

zb_uint8_t zb_zdo_ieee_addr_req	(	zb_uint8_t	param,
		zb_callback_t	cb
	)

IEEE_addr_req primitive.

Parameters

param	- index of buffer with primitive parameters zb_zdo_ieee_addr_req_s. Parameters must be put into the buffer as data (allocated).
cb	- user's function to call when got response from the remote.

Returns

- ZDP transaction sequence number or 0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Example:

void device_ieee_addr_req(zb_uint8_t param, zb_uint16_t dev_idx)
{
 zb_bufid_t buf = param;
 zb_zdo_ieee_addr_req_param_t *req_param;
\
 if (dev_idx != SIMPLE_GW_INVALID_DEV_INDEX)
 {
 req_param = ZB_BUF_GET_PARAM(buf, zb_zdo_ieee_addr_req_param_t);

 req_param->nwk_addr = g_device_ctx.devices[dev_idx].short_addr;
 req_param->dst_addr = req_param->nwk_addr;
 req_param->start_index = 0;
 req_param->request_type = 0;
 zb_zdo_ieee_addr_req(buf, device_ieee_addr_req_cb);
 }
 else
 {
 TRACE_MSG(TRACE_APP2, "No devices in discovery state were found!", (FMT__0));
 zb_buf_free(buf);
 }
}

void device_ieee_addr_req_cb(zb_uint8_t param)
{
 zb_bufid_t buf = param;
 zb_zdo_nwk_addr_resp_head_t *resp;
 zb_ieee_addr_t ieee_addr;
 zb_uint16_t nwk_addr;
 zb_uint8_t dev_idx;

 TRACE_MSG(TRACE_APP2, ">> device_ieee_addr_req_cb param %hd", (FMT__H, param));

 resp = (zb_zdo_nwk_addr_resp_head_t*)zb_buf_begin(buf);
 TRACE_MSG(TRACE_APP2, "resp status %hd, nwk addr %d", (FMT__H_D, resp->status, resp->nwk_addr));

 if (resp->status == ZB_ZDP_STATUS_SUCCESS)
 {
 ZB_LETOH64(ieee_addr, resp->ieee_addr);
 ZB_LETOH16(&nwk_addr, &resp->nwk_addr);

 dev_idx = simple_gw_get_dev_index_by_short_addr(nwk_addr);

 if (dev_idx != SIMPLE_GW_INVALID_DEV_INDEX)
 {
 ZB_MEMCPY(g_device_ctx.devices[dev_idx].ieee_addr, ieee_addr, sizeof(zb_ieee_addr_t));
 g_device_ctx.devices[dev_idx].dev_state = CONFIGURE_BINDING;

 /* The next step is to bind the Light control to the bulb */
 ZB_SCHEDULE_APP_CALLBACK2(bind_device, param, dev_idx);
 param = 0;
 }
 else
 {
 TRACE_MSG(TRACE_APP2, "This resp is not for our device", (FMT__0));
 }
 }

 if (param)
 {
 zb_buf_free(buf);
 }

 TRACE_MSG(TRACE_APP2, "<< device_ieee_addr_req_cb", (FMT__0));
}

zb_uint8_t zb_zdo_nwk_addr_req	(	zb_uint8_t	param,
		zb_callback_t	cb
	)

Sends NWK_addr_req primitive.

Parameters

param	- index of buffer with primitive parameters - zb_zdo_nwk_addr_req_param_s
cb	- user's function to call when got response from the remote. zb_zdo_nwk_addr_resp_head_s passed to cb as parameter.

Returns

- ZDP transaction sequence number or 0xFF if operation cannot be performed now (nor enough memory, resources, etc.)

Example:

void bulb_nwk_addr_req(zb_uint8_t param, zb_ieee_addr_t ieee_addr)
{
 zb_bufid_t buf = param;
 zb_zdo_nwk_addr_req_param_t *req = zb_buf_alloc_tail(buf, sizeof(zb_zdo_nwk_addr_req_param_t));

 TRACE_MSG(TRACE_APP2, "bulb_nwk_addr_req: param %hd ieee "TRACE_FORMAT_64, (FMT__H_A, param, TRACE_ARG_64(ieee_addr)));
 req->dst_addr = ZB_NWK_BROADCAST_ALL_DEVICES;
 ZB_IEEE_ADDR_COPY(req->ieee_addr, ieee_addr);
 req->start_index = 0;
 req->request_type = 0;
 zb_zdo_nwk_addr_req(buf, bulb_nwk_addr_req_cb);
}

void bulb_nwk_addr_req_cb(zb_uint8_t param)
{
 zb_bufid_t buf = param;
 zb_zdo_nwk_addr_resp_head_t *resp;
 zb_ieee_addr_t ieee_addr;
 zb_uint16_t nwk_addr;
 zb_address_ieee_ref_t addr_ref;

 TRACE_MSG(TRACE_APP2, ">> bulb_nwk_addr_req_cb param %hd", (FMT__H, param));

 resp = (zb_zdo_nwk_addr_resp_head_t*)zb_buf_begin(buf);
 TRACE_MSG(TRACE_APP2, "resp status %hd, nwk addr %d", (FMT__H_D, resp->status, resp->nwk_addr));

 if (resp->status == ZB_ZDP_STATUS_SUCCESS)
 {
 ZB_LETOH64(ieee_addr, resp->ieee_addr);
 ZB_LETOH16(&nwk_addr, &resp->nwk_addr);
 zb_address_update(ieee_addr, nwk_addr, ZB_TRUE, &addr_ref);

 /* The next step is to bind the Light control to the bulb */
 find_light_bulb(param, nwk_addr, g_device_ctx.pending_dev_ep);
 }

 zb_buf_free(param);

 TRACE_MSG(TRACE_APP2, "<< bulb_ieee_addr_req_cb", (FMT__0));
}