Add group command definitions

Data Structures
struct	zb_zcl_groups_add_group_req_s
	Add group command structure. More...
struct	zb_zcl_groups_add_group_res_s
	Add group response command structure. More...

Macros
#define	ZB_ZCL_GROUPS_GET_ADD_GROUP_REQ(data_buf, add_group_req)
	Parses Add group command and fills in data request structure. If request contains invalid data, ZB_ZCL_NULL_ID is stored as group_id. More...
#define	ZB_ZCL_GROUPS_GET_ADD_GROUP_RES(data_buf, add_group_res)
	Parses Add group response command and returns response data structure or NULL if request contains invalid data. More...
#define	ZB_ZCL_GROUPS_SEND_ADD_GROUP_REQ(buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb, group_id)
	Send Add group command. More...

Typedefs
typedef struct zb_zcl_groups_add_group_req_s	zb_zcl_groups_add_group_req_t
	Add group command structure.
typedef struct zb_zcl_groups_add_group_res_s	zb_zcl_groups_add_group_res_t
	Add group response command structure.

Detailed Description

Add group request and response commands have simple payload. Response command is being filled and sent by ZCL internals.

Examples

Filling and sending Add Group request:

 ZB_ZCL_GROUPS_SEND_ADD_GROUP_REQ(buffer, DST_ADDR, DST_ADDR_MODE, ENDPOINT_C, ENDPOINT_ED, ZB_AF_HA_PROFILE_ID, ZB_ZCL_ENABLE_DEFAULT_RESPONSE, NULL, TEST_GROUP_ID_1);

Macro Definition Documentation

#define ZB_ZCL_GROUPS_GET_ADD_GROUP_REQ	(		data_buf,
			add_group_req
	)

Value:

{ \
 zb_zcl_groups_add_group_req_t *add_group_req_ptr; \
 (add_group_req_ptr) = zb_buf_len(data_buf) >= ZB_ZCL_ADD_GROUP_REQ_SIZE ? \
 (zb_zcl_groups_add_group_req_t*)zb_buf_begin(data_buf) : NULL; \
 \
 if (add_group_req_ptr) \
 { \
 ZB_HTOLE16(&(add_group_req).group_id, &add_group_req_ptr->group_id);\
 /* group name currently is not supported - do not check it */ \
 } \
 else \
 { \
 add_group_req.group_id = ZB_ZCL_NULL_ID; \
 } \
}

Parses Add group command and fills in data request structure. If request contains invalid data, ZB_ZCL_NULL_ID is stored as group_id.

Parameters

data_buf	- pointer to zb_buf_t buffer containing command request data
add_group_req	- variable to save command request

Note

data_buf buffer should contain command request payload without ZCL header.

#define ZB_ZCL_GROUPS_GET_ADD_GROUP_RES	(		data_buf,
			add_group_res
	)

Value:

{ \
 (add_group_res) = zb_buf_len(data_buf) >= ZB_ZCL_ADD_GROUP_RES_SIZE ? \
 (zb_zcl_groups_add_group_res_t*)zb_buf_begin(data_buf) : NULL; \
 \
 if (add_group_res) \
 { \
 ZB_ZCL_HTOLE16_INPLACE(&(add_group_res)->group_id); \
 /* group name currently is not supported - do not check it */ \
 } \
}

Parses Add group response command and returns response data structure or NULL if request contains invalid data.

Parameters

data_buf	- pointer to zb_buf_t buffer containing command response data
add_group_res	- out pointer to zb_zcl_groups_add_group_res_t, containing command response record

Note

data_buf buffer should contain response command payload without ZCL header

#define ZB_ZCL_GROUPS_SEND_ADD_GROUP_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb,
			group_id
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, def_resp) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), ZB_ZCL_CMD_GROUPS_ADD_GROUP); \
 ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, (group_id)); \
 /* Group name currently is not supported, put empty string */ \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, ZB_ZCL_NULL_STRING); \
 ZB_ZCL_FINISH_PACKET(buffer, ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, ZB_ZCL_CLUSTER_ID_GROUPS, cb); \
}

Send Add group command.

Parameters

buffer	to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status
group_id	- group ID to add