Modules
	Wi-Fi Coexistence
	Module that defines the Wi-Fi coexistence module.

	Frontend Module management

	Setting addresses and PAN ID of the device

	Functions to calculate data given by the driver

	Functions to request FSM transitions and check current state

	Calls to higher layer

	Driver memory management

	RSSI measurement function

	Promiscuous mode

	Auto ACK management

	CCA configuration management

	CSMA-CA procedure

	ACK timeout procedure

	802.15.4 driver configuration
	Configuration of the 802.15.4 radio driver for nRF SoCs.

	Type definitions used in the 802.15.4 driver
	Definitions of types used in the 802.15.4 driver.

Macros
#define	NRF_802154_NO_TIMESTAMP 0
	Timestamp value indicating that the timestamp is inaccurate.

Functions
void	nrf_802154_init (void)
	Initializes the 802.15.4 driver. More...

void	nrf_802154_deinit (void)
	Deinitializes the 802.15.4 driver. More...

void	nrf_802154_channel_set (uint8_t channel)
	Sets the channel on which the radio is to operate. More...

uint8_t	nrf_802154_channel_get (void)
	Gets the channel on which the radio operates. More...

void	nrf_802154_tx_power_set (int8_t power)
	Sets the transmit power. More...

int8_t	nrf_802154_tx_power_get (void)
	Gets the currently set transmit power. More...

Detailed Description

Function Documentation

uint8_t nrf_802154_channel_get ( void )

Gets the channel on which the radio operates.

void nrf_802154_channel_set ( uint8_t channel )

Sets the channel on which the radio is to operate.

Parameters

[in] channel Channel number (11-26).

void nrf_802154_deinit ( void )

Deinitializes the 802.15.4 driver.

This function deinitializes the RADIO peripheral and resets it to the default state.

void nrf_802154_init ( void )

Initializes the 802.15.4 driver.

This function initializes the RADIO peripheral in the RADIO_STATE_SLEEP state.

Note: This function is to be called once, before any other functions from this module.

int8_t nrf_802154_tx_power_get ( void )

Gets the currently set transmit power.

void nrf_802154_tx_power_set ( int8_t power )

Sets the transmit power.

Note: The driver recalculates the requested value to the nearest value accepted by the hardware. The calculation result is rounded up.

Parameters

[in] power Transmit power in dBm.