Electrical Measurement cluster attribute identifiers.
Enumerator |
---|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASUREMENT_TYPE_ID |
This attribute indicates a device s measurement capabilities.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_VOLTAGE_ID |
The DCVoltage attribute represents the most recent DC voltage reading in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_VOLTAGE_MIN_ID |
The DCVoltageMin attribute represents the lowest DC voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_VOLTAGE_MAX_ID |
The DCVoltageMax attribute represents the highest DC voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_CURRENT_ID |
The DCCurrent attribute represents the most recent DC current reading in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_CURRENT_MIN_ID |
The DCCurrentMin attribute represents the lowest DC current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_CURRENT_MAX_ID |
The DCCurrentMax attribute represents the highest DC current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DCPOWER_ID |
The DCPower attribute represents the most recent DC power reading in Watts (W)
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_POWER_MIN_ID |
The DCPowerMin attribute represents the lowest DC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_POWER_MAX_ID |
The DCPowerMax attribute represents the highest DC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_VOLTAGE_MULTIPLIER_ID |
The DCVoltageMultiplier provides a value to be multiplied against the DCVoltage, DCVoltageMin, and DCVoltageMax attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_VOLTAGE_DIVISOR_ID |
The DCVoltageDivisor provides a value to be divided against the DCVoltage, DCVoltageMin, and DCVoltageMax attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_CURRENT_MULTIPLIER_ID |
The DCCurrentMultiplier provides a value to be multiplied against the DCCurrent, DCCurrentMin, and DCCurrentMax attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_CURRENT_DIVISOR_ID |
The DCCurrentDivisor provides a value to be divided against the DCCurrent, DCCurrentMin, and DCCurrentMax attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_POWER_MULTIPLIER_ID |
The DCPowerMultiplier provides a value to be multiplied against the DCPower, DCPowerMin, and DCPowerMax attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_POWER_DIVISOR_ID |
The DCPowerDivisor provides a value to be divided against the DCPower, DCPowerMin, and DCPowerMax attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_FREQUENCY_ID |
The ACFrequency attribute represents the most recent AC Frequency reading in Hertz (Hz).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_FREQUENCY_MIN_ID |
The ACFrequencyMin attribute represents the lowest AC Frequency value measured in Hertz (Hz).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_FREQUENCY_MAX_ID |
The ACFrequencyMax attribute represents the highest AC Frequency value measured in Hertz (Hz).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_NEUTRAL_CURRENT_ID |
The NeutralCurrent attribute represents the AC neutral (Line-Out) current value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_TOTAL_ACTIVE_POWER_ID |
Active power represents the current demand of active power delivered or received at the premises, in kW
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_TOTAL_REACTIVE_POWER_ID |
Reactive power represents the current demand of reactive power delivered or received at the premises, in kVAr.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_TOTAL_APPARENT_POWER_ID |
Represents the current demand of apparent power, in kVA
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED1ST_HARMONIC_CURRENT_ID |
Attribute represent the most recent 1st harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED3RD_HARMONIC_CURRENT_ID |
Attribute represent the most recent 3rd harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED5TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent 5th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED7TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent 7th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED9TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent 9th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED11TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent 11th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED_PHASE1ST_HARMONIC_CURRENT_ID |
Attribute represent the most recent phase of the 1st harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED_PHASE3RD_HARMONIC_CURRENT_ID |
Attribute represent the most recent phase of the 3rd harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED_PHASE5TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent phase of the 5th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED_PHASE7TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent phase of the 7th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED_PHASE9TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent phase of the 9th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_MEASURED_PHASE11TH_HARMONIC_CURRENT_ID |
Attribute represent the most recent phase of the 11th harmonic current reading in an AC frequency.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_FREQUENCY_MULTIPLIER_ID |
Provides a value to be multiplied against the ACFrequency attribute.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_FREQUENCY_DIVISOR_ID |
Provides a value to be divided against the ACFrequency attribute.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_POWER_MULTIPLIER_ID |
Provides a value to be multiplied against a raw or uncompensated sensor count of power being measured by the metering device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_POWER_DIVISOR_ID |
Provides a value to divide against the results of applying the Multiplier attribute against a raw or uncompensated sensor count of power being measured by the metering device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_HARMONIC_CURRENT_MULTIPLIER_ID |
Represents the unit value for the MeasuredNthHarmonicCurrent attribute in the format MeasuredNthHarmonicCurrent * 10 ^ HarmonicCurrentMultiplier amperes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_PHASE_HARMONIC_CURRENT_MULTIPLIER_ID |
Represents the unit value for the MeasuredPhaseNthHarmonicCurrent attribute in the format MeasuredPhaseNthHarmonicCurrent * 10 ^ PhaseHarmonicCurrentMultiplier degrees.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_LINE_CURRENT_ID |
Represents the single phase or Phase A, AC line current (Square root of active and reactive current) value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_CURRENT_ID |
Represents the single phase or Phase A, AC active/resistive current value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_REACTIVE_CURRENT_ID |
Represents the single phase or Phase A, AC reactive current value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMSVOLTAGE_ID |
Represents the most recent RMS voltage reading in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_MIN_ID |
Represents the lowest RMS voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_MAX_ID |
Represents the highest RMS voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMSCURRENT_ID |
Represents the most recent RMS current reading in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_CURRENT_MIN_ID |
Represents the lowest RMS current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_CURRENT_MAX_ID |
Represents the highest RMS current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_ID |
Represents the single phase or Phase A, current demand of active power delivered or received at the premises, in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_MIN_ID |
Represents the lowest AC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_MAX_ID |
Represents the highest AC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_REACTIVE_POWER_ID |
Represents the single phase or Phase A, current demand of reactive power delivered or received at the premises, in VAr.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_APPARENT_POWER_ID |
Represents the single phase or Phase A, current demand of apparent (Square root of active and reactive power) power, in VA.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_POWER_FACTOR_ID |
Contains the single phase or PhaseA, Power Factor ratio in 1/100ths.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMSVOLTAGE_MEASUREMENT_PERIOD_ID |
The Period in seconds that the RMS voltage is averaged over.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_OVER_VOLTAGE_COUNTER_ID |
The number of times the average RMS voltage, has been above the AverageRMS OverVoltage threshold since last reset.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_UNDER_VOLTAGE_COUNTER_ID |
The number of times the average RMS voltage, has been below the AverageRMS underVoltage threshold since last reset.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_OVER_VOLTAGE_PERIOD_ID |
The duration in seconds used to measure an extreme over voltage condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_UNDER_VOLTAGE_PERIOD_ID |
The duration in seconds used to measure an extreme under voltage condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SAG_PERIOD_ID |
The duration in seconds used to measure a voltage sag condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SWELL_PERIOD_ID |
The duration in seconds used to measure a voltage swell condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACVOLTAGE_MULTIPLIER_ID |
Provides a value to be multiplied against the InstantaneousVoltage and RMSVoltage attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACVOLTAGE_DIVISOR_ID |
Provides a value to be divided against the InstantaneousVoltage and RMSVoltage attributes. This attribute must be used in conjunction with the ACVoltageMultiplier attribute. 0x0000 is an invalid value for this attribute.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACCURRENT_MULTIPLIER_ID |
Provides a value to be multiplied against the InstantaneousCurrent and RMSCurrent attributes
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACCURRENT_DIVISOR_ID |
Provides a value to be divided against the ACCurrent, InstantaneousCurrent and RMSCurrent attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACPOWER_MULTIPLIER_ID |
Provides a value to be multiplied against the InstantaneousPower and ActivePower attributes
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACPOWER_DIVISOR_ID |
Provides a value to be divided against the InstantaneousPower and ActivePower attributes.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_OVERLOAD_ALARMS_MASK_ID |
Specifies which configurable alarms may be generated.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_VOLTAGE_OVERLOAD_ID |
Specifies the alarm threshold, set by the manufacturer, for the maximum output voltage supported by device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_DC_CURRENT_OVERLOAD_ID |
Specifies the alarm threshold, set by the manufacturer, for the maximum output current supported by device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_ALARMS_MASK_ID |
Specifies which configurable alarms may be generated.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_VOLTAGE_OVERLOAD_ID |
Specifies the alarm threshold, set by the manufacturer, for the maximum output voltage supported by device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_CURRENT_OVERLOAD_ID |
Specifies the alarm threshold, set by the manufacturer, for the maximum output current supported by device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_ACTIVE_POWER_OVERLOAD_ID |
Specifies the alarm threshold, set by the manufacturer, for the maximum output active power supported by device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AC_REACTIVE_POWER_OVERLOAD_ID |
Specifies the alarm threshold, set by the manufacturer, for the maximum output reactive power supported by device.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_OVER_VOLTAGE_ID |
The average RMS voltage above which an over voltage condition is reported.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_UNDER_VOLTAGE_ID |
The average RMS voltage below which an under voltage condition is reported.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_OVER_VOLTAGE_ID |
The RMS voltage above which an extreme under voltage condition is reported.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_UNDER_VOLTAGE_ID |
The RMS voltage below which an extreme under voltage condition is reported.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SAG_ID |
The RMS voltage below which a sag condition is reported.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SWELL_ID |
The RMS voltage above which a swell condition is reported.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_LINE_CURRENT_PH_B_ID |
Represents the Phase B, AC line current (Square root sum of active and reactive currents) value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_CURRENT_PH_B_ID |
Represents the Phase B, AC active/resistive current value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_REACTIVE_CURRENT_PH_B_ID |
Represents the Phase B, AC reactive current value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMSVOLTAGE_PHB_ID |
Represents the most recent RMS voltage reading in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_MIN_PH_B_ID |
Represents the lowest RMS voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_MAX_PH_B_ID |
Represents the highest RMS voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMSCURRENT_PHB_ID |
Represents the most recent RMS current reading in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_CURRENT_MIN_PH_B_ID |
Represents the lowest RMS current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_CURRENT_MAX_PH_B_ID |
Represents the highest RMS current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_PHB_ID |
Represents the Phase B, current demand of active power delivered or received at the premises, in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_MIN_PH_B_ID |
Represents the lowest AC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_MAX_PH_B_ID |
Represents the highest AC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_REACTIVE_POWER_PH_B_ID |
Represents the Phase B, current demand of reactive power delivered or received at the premises, in VAr.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_APPARENT_POWER_PHB_ID |
Represents the Phase B, current demand of apparent (Square root of active and reactive power) power, in VA.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_POWER_FACTOR_PH_B_ID |
Contains the PhaseB, Power Factor ratio in 1/100ths.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMSVOLTAGE_MEASUREMENT_PERIOD_PHB_ID |
The number of times the average RMS voltage, has been above the AverageRMS OverVoltage threshold since last reset.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_OVER_VOLTAGE_COUNTER_PH_B_ID |
The number of times the average RMS voltage, has been above the AverageRMS OverVoltage threshold since last reset.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_UNDER_VOLTAGE_COUNTER_PH_B_ID |
The number of times the average RMS voltage, has been below the AverageRMS underVoltage threshold since last reset.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_OVER_VOLTAGE_PERIOD_PH_B_ID |
The duration in seconds used to measure an extreme over voltage condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_UNDER_VOLTAGE_PERIOD_PH_B_ID |
The duration in seconds used to measure an extreme under voltage condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SAG_PERIOD_PH_B_ID |
The duration in seconds used to measure a voltage sag condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SWELL_PERIOD_PH_B_ID |
The duration in seconds used to measure a voltage swell condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_LINE_CURRENT_PH_C_ID |
Represents the Phase C, AC line current (Square root of active and reactive current) value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_CURRENT_PH_C_ID |
Represents the Phase C, AC active/resistive current value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_REACTIVE_CURRENT_PH_C_ID |
Represents the Phase C, AC reactive current value at the moment in time the attribute is read, in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMSVOLTAGE_PHC_ID |
Represents the most recent RMS voltage reading in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_MIN_PH_C_ID |
Represents the lowest RMS voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_MAX_PH_C_ID |
Represents the highest RMS voltage value measured in Volts (V).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMSCURRENT_PHC_ID |
Represents the most recent RMS current reading in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_CURRENT_MIN_PH_C_ID |
Represents the lowest RMS current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_CURRENT_MAX_PH_C_ID |
Represents the highest RMS current value measured in Amps (A).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_PHC_ID |
Represents the Phase C, current demand of active power delivered or received at the premises, in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_MIN_PH_C_ID |
Represents the lowest AC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_ACTIVE_POWER_MAX_PH_C_ID |
Represents the highest AC power value measured in Watts (W).
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_REACTIVE_POWER_PH_C_ID |
Represents the Phase C, current demand of reactive power delivered or received at the premises, in VAr.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_APPARENT_POWER_PHC_ID |
Represents the Phase C, current demand of apparent (Square root of active and reactive power) power, in VA.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_POWER_FACTOR_PH_C_ID |
Contains the Phase C, Power Factor ratio in 1/100ths.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMSVOLTAGE_MEASUREMENT_PERIOD_PHC_ID |
The Period in seconds that the RMS voltage is averaged over
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_OVER_VOLTAGE_COUNTER_PH_C_ID |
The number of times the average RMS voltage, has been above the AverageRMS OverVoltage threshold since last reset.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_AVERAGE_RMS_UNDER_VOLTAGE_COUNTER_PH_C_ID |
The number of times the average RMS voltage, has been below the AverageRMS underVoltage threshold since last reset.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_OVER_VOLTAGE_PERIOD_PH_C_ID |
The duration in seconds used to measure an extreme over voltage condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_EXTREME_UNDER_VOLTAGE_PERIOD_PH_C_ID |
The duration in seconds used to measure an extreme under voltage condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SAG_PERIOD_PH_C_ID |
The duration in seconds used to measure a voltage sag condition.
|
ZB_ZCL_ATTR_ELECTRICAL_MEASUREMENT_RMS_VOLTAGE_SWELL_PERIOD_PH_C_ID |
The duration in seconds used to measure a voltage swell condition.
|