| uint32_t dfu_progress_t::command_crc |
The calculated CRC of the init command (calculated after the transfer is completed).
| uint32_t dfu_progress_t::command_offset |
The offset of the currently received init command data. The offset will increase as the init command is received.
| uint32_t dfu_progress_t::command_size |
The size of the current init command stored in the DFU settings.
| uint32_t dfu_progress_t::data_object_size |
The size of the last object created. Note that this size is not the size of the whole firmware image.
| uint32_t dfu_progress_t::firmware_image_crc |
CRC value of the current firmware (continuously calculated as data is received).
| uint32_t dfu_progress_t::firmware_image_crc_last |
The CRC of the last executed object.
| uint32_t dfu_progress_t::firmware_image_offset |
The offset of the current firmware image being transferred. Note that this offset is the offset in the entire firmware image and not only the current object.
| uint32_t dfu_progress_t::firmware_image_offset_last |
The offset of the last executed object from the start of the firmware image.
| uint32_t dfu_progress_t::update_start_address |
Value indicating the start address of the new firmware (before copy). It's always used, but it's most important for an SD/SD+BL update where the SD changes size or if the DFU process had a power loss when updating a SD with changed size.
The documentation for this struct was generated from the following file:
- components/libraries/bootloader/dfu/nrf_dfu_types.h