BSC simulator control block structure. More...
#include <ant_bsc_simulator_local.h>
Data Fields | |
| uint8_t | device_type |
| bool | auto_change |
| Cadence will change automatically (if auto_change is set) or manually. | |
| uint16_t | speed_sim_val |
| Instantaneous speed value. | |
| uint16_t | cadence_sim_val |
| Instantaneous cadence value. | |
| uint32_t | time_since_last_s_evt |
| Time since last speed event occurred (integer part). | |
| uint64_t | fraction_since_last_s_evt |
| Time since last speed event occurred (fractional part). | |
| uint32_t | time_since_last_c_evt |
| Time since last cadence event occurred (integer part). | |
| uint64_t | fraction_since_last_c_evt |
| Time since last cadence event occurred (fractional part). | |
| sensorsim_state_t | sensorsim_s_state |
| State of the simulated speed sensor. | |
| sensorsim_cfg_t | sensorsim_s_cfg |
| Configuration of the simulated speed sensor. | |
| sensorsim_state_t | sensorsim_c_state |
| State of the simulated cadence sensor. | |
| sensorsim_cfg_t | sensorsim_c_cfg |
| Configuration of the simulated cadence sensor. | |
| uint16_t | prev_time_since_evt |
| Previous value of time since the last event. | |
| uint32_t | cumulative_time |
| Cumulative time in 2 s ticks used for updating the cumulative time. | |
| uint32_t | cumulative_time_frac |
| Cumulative time in 2 s ticks (fractional part), used for updating the cumulative time. | |
| uint8_t | stop_cnt |
| Counter used for simulating bicycle stopped state. | |
BSC simulator control block structure.