TIMER periperal driver configuration

Macros
#define	NRFX_TIMER_ENABLED
	Set to 1 to activate. More...
#define	NRFX_TIMER0_ENABLED
	Enable TIMER0 instance. More...
#define	NRFX_TIMER1_ENABLED
	Enable TIMER1 instance. More...
#define	NRFX_TIMER2_ENABLED
	Enable TIMER2 instance. More...
#define	NRFX_TIMER3_ENABLED
	Enable TIMER3 instance. More...
#define	NRFX_TIMER4_ENABLED
	Enable TIMER4 instance. More...
#define	NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
	Timer frequency if in Timer mode. More...
#define	NRFX_TIMER_DEFAULT_CONFIG_MODE
	Timer mode or operation. More...
#define	NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
	Timer counter bit width. More...
#define	NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
	Interrupt priority. More...
#define	NRFX_TIMER_CONFIG_LOG_ENABLED
	Enables logging in the module. More...
#define	NRFX_TIMER_CONFIG_LOG_LEVEL
	Default Severity level. More...
#define	NRFX_TIMER_CONFIG_INFO_COLOR
	ANSI escape code prefix. More...
#define	NRFX_TIMER_CONFIG_DEBUG_COLOR
	ANSI escape code prefix. More...

Detailed Description

Macro Definition Documentation

#define NRFX_TIMER0_ENABLED

Enable TIMER0 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER1_ENABLED

Enable TIMER1 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER2_ENABLED

Enable TIMER2 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER3_ENABLED

Enable TIMER3 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER4_ENABLED

Enable TIMER4 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_CONFIG_DEBUG_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_CONFIG_INFO_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_CONFIG_LOG_ENABLED

Enables logging in the module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_CONFIG_LOG_LEVEL

Default Severity level.

Following options are available:

• 0 - Off
• 1 - Error
• 2 - Warning
• 3 - Info
• 4 - Debug

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH

Timer counter bit width.

Following options are available:

• 0 - 16 bit
• 1 - 8 bit
• 2 - 24 bit
• 3 - 32 bit

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY

Timer frequency if in Timer mode.

Following options are available:

• 0 - 16 MHz
• 1 - 8 MHz
• 2 - 4 MHz
• 3 - 2 MHz
• 4 - 1 MHz
• 5 - 500 kHz
• 6 - 250 kHz
• 7 - 125 kHz
• 8 - 62.5 kHz
• 9 - 31.25 kHz

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY

Interrupt priority.

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4 (Applicable devices only)
• 5 - 5 (Applicable devices only)
• 6 - 6 (Applicable devices only)
• 7 - 7 (Applicable devices only)

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_DEFAULT_CONFIG_MODE

Timer mode or operation.

Following options are available:

• 0 - Timer
• 1 - Counter

Note

This is an NRF_CONFIG macro.

#define NRFX_TIMER_ENABLED

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.