POWER peripheral driver. More...

Modules
	POWER peripheral driver configuration

Data Structures
struct	nrfx_power_config_t
	General power configuration. More...

struct	nrfx_power_pofwarn_config_t
	The configuration for power failure comparator. More...

struct	nrfx_power_sleepevt_config_t
	The configuration of sleep event processing. More...

struct	nrfx_power_usbevt_config_t
	The configuration of the USB-related power events. More...

Enumerations
enum	nrfx_power_mode_t { NRFX_POWER_MODE_CONSTLAT, NRFX_POWER_MODE_LOWPWR }
	Power mode possible configurations. More...

enum	nrfx_power_sleep_evt_t { NRFX_POWER_SLEEP_EVT_ENTER, NRFX_POWER_SLEEP_EVT_EXIT }
	Events from power system. More...

enum	nrfx_power_usb_evt_t { NRFX_POWER_USB_EVT_DETECTED, NRFX_POWER_USB_EVT_REMOVED, NRFX_POWER_USB_EVT_READY }
	Events from USB power system. More...

enum	nrfx_power_usb_state_t { NRFX_POWER_USB_STATE_DISCONNECTED, NRFX_POWER_USB_STATE_CONNECTED, NRFX_POWER_USB_STATE_READY }
	USB power state. More...

Functions
nrfx_power_pofwarn_event_handler_t	nrfx_power_pof_handler_get (void)
	Function for getting the handler of the power failure comparator. More...

nrfx_power_usb_event_handler_t	nrfx_power_usb_handler_get (void)
	Function for getting the handler of the USB power. More...

nrfx_err_t	nrfx_power_init (nrfx_power_config_t const *p_config)
	Function for initializing the power module driver. More...

void	nrfx_power_uninit (void)
	Function for unintializing the power module driver. More...

void	nrfx_power_pof_init (nrfx_power_pofwarn_config_t const *p_config)
	Function for initializing the power failure comparator. More...

void	nrfx_power_pof_enable (nrfx_power_pofwarn_config_t const *p_config)
	Function for enabling the power failure comparator. Sets and enables the interrupt of the power failure comparator. This function cannot be in use when SoftDevice is enabled. If the event handler set in the init function is set to NULL, the interrupt will be disabled. More...

void	nrfx_power_pof_disable (void)
	Function for disabling the power failure comparator. More...

void	nrfx_power_pof_uninit (void)
	Function for clearing the power failure comparator settings. More...

void	nrfx_power_sleepevt_init (nrfx_power_sleepevt_config_t const *p_config)
	Function for initializing the processing of the sleep events. More...

void	nrfx_power_sleepevt_enable (nrfx_power_sleepevt_config_t const *p_config)
	Function for enabling the processing of the sleep events. More...

void	nrfx_power_sleepevt_disable (void)
	Function for disabling the processing of the sleep events.

void	nrfx_power_sleepevt_uninit (void)
	Function for uninitializing the processing of the sleep events. More...

void	nrfx_power_usbevt_init (nrfx_power_usbevt_config_t const *p_config)
	Function for initializing the processing of USB power event. More...

void	nrfx_power_usbevt_enable (void)
	Function for enabling the processing of USB power event.

void	nrfx_power_usbevt_disable (void)
	Function for disabling the processing of USB power event.

void	nrfx_power_usbevt_uninit (void)
	Function for uninitalizing the processing of USB power event. More...

__STATIC_INLINE nrfx_power_usb_state_t	nrfx_power_usbstatus_get (void)
	Function for getting the status of USB power. More...

Callback types
Defined types of callback functions.
typedef void(*	nrfx_power_pofwarn_event_handler_t )(void)
	Event handler for power failure warning.

typedef void(*	nrfx_power_sleep_event_handler_t )(nrfx_power_sleep_evt_t event)
	Event handler for the sleep events. More...

typedef void(*	nrfx_power_usb_event_handler_t )(nrfx_power_usb_evt_t event)
	Event handler for the USB-related power events. More...

Detailed Description

POWER peripheral driver.

Typedef Documentation

typedef void(* nrfx_power_sleep_event_handler_t)(nrfx_power_sleep_evt_t event)

Event handler for the sleep events.

Parameters

event Event type

typedef void(* nrfx_power_usb_event_handler_t)(nrfx_power_usb_evt_t event)

Event handler for the USB-related power events.

Parameters

event Event type

Enumeration Type Documentation

enum nrfx_power_mode_t

Power mode possible configurations.

Enumerator
NRFX_POWER_MODE_CONSTLAT	Constant latency mode
NRFX_POWER_MODE_LOWPWR	Low power mode

enum nrfx_power_sleep_evt_t

Events from power system.

Enumerator

NRFX_POWER_SLEEP_EVT_ENTER

CPU entered WFI/WFE sleep

                   Keep in mind that if this interrupt is enabled,
                   it means that CPU was waken up just after WFI by this interrupt.

NRFX_POWER_SLEEP_EVT_EXIT

CPU exited WFI/WFE sleep

enum nrfx_power_usb_evt_t

Events from USB power system.

Enumerator
NRFX_POWER_USB_EVT_DETECTED	USB power detected on the connector (plugged in).
NRFX_POWER_USB_EVT_REMOVED	USB power removed from the connector.
NRFX_POWER_USB_EVT_READY	USB power regulator ready.

enum nrfx_power_usb_state_t

USB power state.

The single enumerator that holds all data about current state of USB related POWER.

Organized this way that higher power state has higher numeric value

Enumerator
NRFX_POWER_USB_STATE_DISCONNECTED	No power on USB lines detected.
NRFX_POWER_USB_STATE_CONNECTED	The USB power is detected, but USB power regulator is not ready.
NRFX_POWER_USB_STATE_READY	From the power viewpoint, USB is ready for working.

Function Documentation

nrfx_err_t nrfx_power_init ( nrfx_power_config_t const * p_config )

Function for initializing the power module driver.

Enabled power module driver processes all the interrupts from the power system.

Parameters

[in] p_config Pointer to the structure with the initial configuration.

Return values

NRFX_SUCCESS	Successfully initialized.
NRFX_ERROR_ALREADY_INITIALIZED	Module was already initialized.

void nrfx_power_pof_disable ( void )

Function for disabling the power failure comparator.

Disables the power failure comparator interrupt.

void nrfx_power_pof_enable ( nrfx_power_pofwarn_config_t const * p_config )

Function for enabling the power failure comparator. Sets and enables the interrupt of the power failure comparator. This function cannot be in use when SoftDevice is enabled. If the event handler set in the init function is set to NULL, the interrupt will be disabled.

Parameters

[in] p_config Configuration with values and event handler.

nrfx_power_pofwarn_event_handler_t nrfx_power_pof_handler_get ( void )

Function for getting the handler of the power failure comparator.

Returns: Handler of the power failure comparator.

void nrfx_power_pof_init ( nrfx_power_pofwarn_config_t const * p_config )

Function for initializing the power failure comparator.

Configures the power failure comparator. This function does not set it up and enable it. These steps can be done with functions nrfx_power_pof_enable and nrfx_power_pof_disable or with the SoftDevice API (when in use).

Parameters

[in] p_config Configuration with values and event handler. If event handler is set to NULL, the interrupt will be disabled.

void nrfx_power_pof_uninit ( void )

Function for clearing the power failure comparator settings.

Clears the settings of the power failure comparator.

void nrfx_power_sleepevt_enable ( nrfx_power_sleepevt_config_t const * p_config )

Function for enabling the processing of the sleep events.

Parameters

[in] p_config Configuration with values and event handler.

void nrfx_power_sleepevt_init ( nrfx_power_sleepevt_config_t const * p_config )

Function for initializing the processing of the sleep events.

Configures and sets up the sleep event processing.

Parameters

[in] p_config Configuration with values and event handler.

See Also: nrfx_power_sleepevt_uninit

void nrfx_power_sleepevt_uninit ( void )

Function for uninitializing the processing of the sleep events.

See Also: nrfx_power_sleepevt_init

void nrfx_power_uninit ( void )

Function for unintializing the power module driver.

Disables all the interrupt handling in the module.

See Also: nrfx_power_init

nrfx_power_usb_event_handler_t nrfx_power_usb_handler_get ( void )

Function for getting the handler of the USB power.

Returns: Handler of the USB power.

void nrfx_power_usbevt_init ( nrfx_power_usbevt_config_t const * p_config )

Function for initializing the processing of USB power event.

Configures and sets up the USB power event processing.

Parameters

[in] p_config Configuration with values and event handler.

See Also: nrfx_power_usbevt_uninit

void nrfx_power_usbevt_uninit ( void )

Function for uninitalizing the processing of USB power event.

See Also: nrfx_power_usbevt_init

__STATIC_INLINE nrfx_power_usb_state_t nrfx_power_usbstatus_get ( void )

Function for getting the status of USB power.

Returns: Current USB power status.

Modules

Data Structures

Enumerations

Functions

Callback types

Detailed Description

Typedef Documentation

Enumeration Type Documentation

Function Documentation