COMP peripheral driver configuration

Macros
#define	NRFX_COMP_ENABLED
	Enable COMP driver. More...
#define	NRFX_COMP_CONFIG_REF
	Reference voltage. More...
#define	NRFX_COMP_CONFIG_MAIN_MODE
	Main mode. More...
#define	NRFX_COMP_CONFIG_SPEED_MODE
	Speed mode. More...
#define	NRFX_COMP_CONFIG_HYST
	Hystheresis. More...
#define	NRFX_COMP_CONFIG_ISOURCE
	Current Source. More...
#define	NRFX_COMP_CONFIG_INPUT
	Analog input. More...
#define	NRFX_COMP_CONFIG_IRQ_PRIORITY
	Interrupt priority. More...
#define	NRFX_COMP_CONFIG_LOG_ENABLED
	Enables logging in the module. More...
#define	NRFX_COMP_CONFIG_LOG_LEVEL
	Default Severity level. More...
#define	NRFX_COMP_CONFIG_INFO_COLOR
	ANSI escape code prefix. More...
#define	NRFX_COMP_CONFIG_DEBUG_COLOR
	ANSI escape code prefix. More...

Detailed Description

Macro Definition Documentation

#define NRFX_COMP_CONFIG_DEBUG_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_HYST

Hystheresis.

Following options are available:

• 0 - No
• 1 - 50mV

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_INFO_COLOR

ANSI escape code prefix.

Following options are available:

• 0 - Default
• 1 - Black
• 2 - Red
• 3 - Green
• 4 - Yellow
• 5 - Blue
• 6 - Magenta
• 7 - Cyan
• 8 - White

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_INPUT

Analog input.

Following options are available:

• 0
• 1
• 2
• 3
• 4
• 5
• 6
• 7

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_IRQ_PRIORITY

Interrupt priority.

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4 (Applicable devices only)
• 5 - 5 (Applicable devices only)
• 6 - 6 (Applicable devices only)
• 7 - 7 (Applicable devices only)

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_ISOURCE

Current Source.

Following options are available:

• 0 - Off
• 1 - 2.5 uA
• 2 - 5 uA
• 3 - 10 uA

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_LOG_ENABLED

Enables logging in the module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_LOG_LEVEL

Default Severity level.

Following options are available:

• 0 - Off
• 1 - Error
• 2 - Warning
• 3 - Info
• 4 - Debug

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_MAIN_MODE

Main mode.

Following options are available:

• 0 - Single ended
• 1 - Differential

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_REF

Reference voltage.

Following options are available:

• 0 - Internal 1.2V
• 1 - Internal 1.8V
• 2 - Internal 2.4V
• 4 - VDD
• 7 - ARef

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_CONFIG_SPEED_MODE

Speed mode.

Following options are available:

• 0 - Low power
• 1 - Normal
• 2 - High speed

Note

This is an NRF_CONFIG macro.

#define NRFX_COMP_ENABLED

Enable COMP driver.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.