Hardware access layer for managing the Watchdog Timer (WDT) peripheral. More...
Macros | |
#define | NRF_WDT_CHANNEL_NUMBER 0x8UL |
Number of WDT channels. | |
#define | NRF_WDT_RR_VALUE 0x6E524635UL /* Fixed value; should not be modified. */ |
WDT register reload value. | |
Enumerations | |
enum | nrf_wdt_task_t { NRF_WDT_TASK_START = offsetof(NRF_WDT_Type, TASKS_START) } |
WDT tasks. More... | |
enum | nrf_wdt_event_t { NRF_WDT_EVENT_TIMEOUT = offsetof(NRF_WDT_Type, EVENTS_TIMEOUT) } |
WDT events. More... | |
enum | nrf_wdt_behaviour_t { NRF_WDT_BEHAVIOUR_RUN_SLEEP = WDT_CONFIG_SLEEP_Msk, NRF_WDT_BEHAVIOUR_RUN_HALT = WDT_CONFIG_HALT_Msk, NRF_WDT_BEHAVIOUR_RUN_SLEEP_HALT = WDT_CONFIG_SLEEP_Msk | WDT_CONFIG_HALT_Msk, NRF_WDT_BEHAVIOUR_PAUSE_SLEEP_HALT = 0 } |
WDT behavior in the SLEEP or HALT CPU modes. More... | |
enum | nrf_wdt_rr_register_t { NRF_WDT_RR0 = 0, NRF_WDT_RR1, NRF_WDT_RR2, NRF_WDT_RR3, NRF_WDT_RR4, NRF_WDT_RR5, NRF_WDT_RR6, NRF_WDT_RR7 } |
WDT reload request registers. More... | |
enum | nrf_wdt_int_mask_t { NRF_WDT_INT_TIMEOUT_MASK = WDT_INTENSET_TIMEOUT_Msk } |
WDT interrupts. More... | |
Functions | |
__STATIC_INLINE void | nrf_wdt_behaviour_set (nrf_wdt_behaviour_t behaviour) |
Function for configuring the watchdog behavior when the CPU is sleeping or halted. More... | |
__STATIC_INLINE void | nrf_wdt_task_trigger (nrf_wdt_task_t task) |
Function for starting the WDT task. More... | |
__STATIC_INLINE void | nrf_wdt_event_clear (nrf_wdt_event_t event) |
Function for clearing the WDT event register. More... | |
__STATIC_INLINE bool | nrf_wdt_event_check (nrf_wdt_event_t event) |
Function for retrieving the state of the WDT event. More... | |
__STATIC_INLINE void | nrf_wdt_int_enable (uint32_t int_mask) |
Function for enabling the specified interrupt. More... | |
__STATIC_INLINE bool | nrf_wdt_int_enable_check (uint32_t int_mask) |
Function for retrieving the state of given interrupt. More... | |
__STATIC_INLINE void | nrf_wdt_int_disable (uint32_t int_mask) |
Function for disabling a specific interrupt. More... | |
__STATIC_INLINE void | nrf_wdt_subscribe_set (nrf_wdt_task_t task, uint8_t channel) |
Function for setting the subscribe configuration for a given WDT task. More... | |
__STATIC_INLINE void | nrf_wdt_subscribe_clear (nrf_wdt_task_t task) |
Function for clearing the subscribe configuration for a given WDT task. More... | |
__STATIC_INLINE void | nrf_wdt_publish_set (nrf_wdt_event_t event, uint8_t channel) |
Function for setting the publish configuration for a given WDT event. More... | |
__STATIC_INLINE void | nrf_wdt_publish_clear (nrf_wdt_event_t event) |
Function for clearing the publish configuration for a given WDT event. More... | |
__STATIC_INLINE uint32_t | nrf_wdt_task_address_get (nrf_wdt_task_t task) |
Function for returning the address of a specific WDT task register. More... | |
__STATIC_INLINE uint32_t | nrf_wdt_event_address_get (nrf_wdt_event_t event) |
Function for returning the address of a specific WDT event register. More... | |
__STATIC_INLINE bool | nrf_wdt_started (void) |
Function for retrieving the watchdog status. More... | |
__STATIC_INLINE bool | nrf_wdt_request_status (nrf_wdt_rr_register_t rr_register) |
Function for retrieving the watchdog reload request status. More... | |
__STATIC_INLINE void | nrf_wdt_reload_value_set (uint32_t reload_value) |
Function for setting the watchdog reload value. More... | |
__STATIC_INLINE uint32_t | nrf_wdt_reload_value_get (void) |
Function for retrieving the watchdog reload value. More... | |
__STATIC_INLINE void | nrf_wdt_reload_request_enable (nrf_wdt_rr_register_t rr_register) |
Function for enabling a specific reload request register. More... | |
__STATIC_INLINE void | nrf_wdt_reload_request_disable (nrf_wdt_rr_register_t rr_register) |
Function for disabling a specific reload request register. More... | |
__STATIC_INLINE bool | nrf_wdt_reload_request_is_enabled (nrf_wdt_rr_register_t rr_register) |
Function for retrieving the status of a specific reload request register. More... | |
__STATIC_INLINE void | nrf_wdt_reload_request_set (nrf_wdt_rr_register_t rr_register) |
Function for setting a specific reload request register. More... | |
Hardware access layer for managing the Watchdog Timer (WDT) peripheral.
enum nrf_wdt_behaviour_t |
WDT behavior in the SLEEP or HALT CPU modes.
enum nrf_wdt_event_t |
enum nrf_wdt_int_mask_t |
WDT reload request registers.
enum nrf_wdt_task_t |
__STATIC_INLINE void nrf_wdt_behaviour_set | ( | nrf_wdt_behaviour_t | behaviour | ) |
Function for configuring the watchdog behavior when the CPU is sleeping or halted.
behaviour | Watchdog behavior when CPU is in SLEEP or HALT mode. |
__STATIC_INLINE uint32_t nrf_wdt_event_address_get | ( | nrf_wdt_event_t | event | ) |
Function for returning the address of a specific WDT event register.
[in] | event | Event. |
__STATIC_INLINE bool nrf_wdt_event_check | ( | nrf_wdt_event_t | event | ) |
Function for retrieving the state of the WDT event.
[in] | event | Event to be checked. |
true | The event has been generated. |
false | The event has not been generated. |
__STATIC_INLINE void nrf_wdt_event_clear | ( | nrf_wdt_event_t | event | ) |
Function for clearing the WDT event register.
[in] | event | Event. |
__STATIC_INLINE void nrf_wdt_int_disable | ( | uint32_t | int_mask | ) |
Function for disabling a specific interrupt.
[in] | int_mask | Interrupt. |
__STATIC_INLINE void nrf_wdt_int_enable | ( | uint32_t | int_mask | ) |
Function for enabling the specified interrupt.
[in] | int_mask | Interrupt. |
__STATIC_INLINE bool nrf_wdt_int_enable_check | ( | uint32_t | int_mask | ) |
Function for retrieving the state of given interrupt.
[in] | int_mask | Interrupt. |
true | Interrupt is enabled. |
false | Interrupt is not enabled. |
__STATIC_INLINE void nrf_wdt_publish_clear | ( | nrf_wdt_event_t | event | ) |
Function for clearing the publish configuration for a given WDT event.
[in] | event | Event for which to clear the configuration. |
__STATIC_INLINE void nrf_wdt_publish_set | ( | nrf_wdt_event_t | event, |
uint8_t | channel | ||
) |
Function for setting the publish configuration for a given WDT event.
[in] | event | Event for which to set the configuration. |
[in] | channel | Channel through which to publish the event. |
__STATIC_INLINE void nrf_wdt_reload_request_disable | ( | nrf_wdt_rr_register_t | rr_register | ) |
Function for disabling a specific reload request register.
[in] | rr_register | Reload request register to be disabled. |
__STATIC_INLINE void nrf_wdt_reload_request_enable | ( | nrf_wdt_rr_register_t | rr_register | ) |
Function for enabling a specific reload request register.
[in] | rr_register | Reload request register to be enabled. |
__STATIC_INLINE bool nrf_wdt_reload_request_is_enabled | ( | nrf_wdt_rr_register_t | rr_register | ) |
Function for retrieving the status of a specific reload request register.
[in] | rr_register | Reload request register to be checked. |
true | The reload request register is enabled. |
false | The reload request register is not enabled. |
__STATIC_INLINE void nrf_wdt_reload_request_set | ( | nrf_wdt_rr_register_t | rr_register | ) |
Function for setting a specific reload request register.
[in] | rr_register | Reload request register to set. |
__STATIC_INLINE uint32_t nrf_wdt_reload_value_get | ( | void | ) |
Function for retrieving the watchdog reload value.
__STATIC_INLINE void nrf_wdt_reload_value_set | ( | uint32_t | reload_value | ) |
Function for setting the watchdog reload value.
[in] | reload_value | Watchdog counter initial value. |
__STATIC_INLINE bool nrf_wdt_request_status | ( | nrf_wdt_rr_register_t | rr_register | ) |
Function for retrieving the watchdog reload request status.
[in] | rr_register | Reload request register to be checked. |
true | Reload request is running. |
false | No reload requests are running. |
__STATIC_INLINE bool nrf_wdt_started | ( | void | ) |
Function for retrieving the watchdog status.
true | The watchdog is started. |
false | The watchdog is not started. |
__STATIC_INLINE void nrf_wdt_subscribe_clear | ( | nrf_wdt_task_t | task | ) |
Function for clearing the subscribe configuration for a given WDT task.
[in] | task | Task for which to clear the configuration. |
__STATIC_INLINE void nrf_wdt_subscribe_set | ( | nrf_wdt_task_t | task, |
uint8_t | channel | ||
) |
Function for setting the subscribe configuration for a given WDT task.
[in] | task | Task for which to set the configuration. |
[in] | channel | Channel through which to subscribe events. |
__STATIC_INLINE uint32_t nrf_wdt_task_address_get | ( | nrf_wdt_task_t | task | ) |
Function for returning the address of a specific WDT task register.
[in] | task | Task. |
__STATIC_INLINE void nrf_wdt_task_trigger | ( | nrf_wdt_task_t | task | ) |
Function for starting the WDT task.
[in] | task | Task. |