TIMER periperal driver - legacy layer configuration

Macros
#define	TIMER_ENABLED
	Set to 1 to activate. More...
#define	TIMER_DEFAULT_CONFIG_FREQUENCY
	Timer frequency if in Timer mode. More...
#define	TIMER_DEFAULT_CONFIG_MODE
	Timer mode or operation. More...
#define	TIMER_DEFAULT_CONFIG_BIT_WIDTH
	Timer counter bit width. More...
#define	TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
	Interrupt priority. More...
#define	TIMER0_ENABLED
	Enable TIMER0 instance. More...
#define	TIMER1_ENABLED
	Enable TIMER1 instance. More...
#define	TIMER2_ENABLED
	Enable TIMER2 instance. More...
#define	TIMER3_ENABLED
	Enable TIMER3 instance. More...
#define	TIMER4_ENABLED
	Enable TIMER4 instance. More...

Detailed Description

Macro Definition Documentation

#define TIMER0_ENABLED

Enable TIMER0 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define TIMER1_ENABLED

Enable TIMER1 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define TIMER2_ENABLED

Enable TIMER2 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define TIMER3_ENABLED

Enable TIMER3 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define TIMER4_ENABLED

Enable TIMER4 instance.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define TIMER_DEFAULT_CONFIG_BIT_WIDTH

Timer counter bit width.

Following options are available:

• 0 - 16 bit
• 1 - 8 bit
• 2 - 24 bit
• 3 - 32 bit

Note

This is an NRF_CONFIG macro.

#define TIMER_DEFAULT_CONFIG_FREQUENCY

Timer frequency if in Timer mode.

Following options are available:

• 0 - 16 MHz
• 1 - 8 MHz
• 2 - 4 MHz
• 3 - 2 MHz
• 4 - 1 MHz
• 5 - 500 kHz
• 6 - 250 kHz
• 7 - 125 kHz
• 8 - 62.5 kHz
• 9 - 31.25 kHz

Note

This is an NRF_CONFIG macro.

#define TIMER_DEFAULT_CONFIG_IRQ_PRIORITY

Interrupt priority.

Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice

Following options are available:

• 0 - 0 (highest)
• 1 - 1
• 2 - 2
• 3 - 3
• 4 - 4 (Applicable devices only)
• 5 - 5 (Applicable devices only)
• 6 - 6 (Applicable devices only)
• 7 - 7 (Applicable devices only)

Note

This is an NRF_CONFIG macro.

#define TIMER_DEFAULT_CONFIG_MODE

Timer mode or operation.

Following options are available:

• 0 - Timer
• 1 - Counter

Note

This is an NRF_CONFIG macro.

#define TIMER_ENABLED

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.