Hardware access layer (HAL) for managing the Comparator (COMP) peripheral. More...

Data Structures
struct	nrf_comp_th_t
	COMP THDOWN and THUP values that are used to calculate the threshold voltages VDOWN and VUP. More...

struct	nrf_comp_ref_conf_t
	COMP reference configuration. More...

Enumerations
enum	nrf_comp_input_t { NRF_COMP_INPUT_0 = COMP_PSEL_PSEL_AnalogInput0, NRF_COMP_INPUT_1 = COMP_PSEL_PSEL_AnalogInput1, NRF_COMP_INPUT_2 = COMP_PSEL_PSEL_AnalogInput2, NRF_COMP_INPUT_3 = COMP_PSEL_PSEL_AnalogInput3, NRF_COMP_INPUT_4 = COMP_PSEL_PSEL_AnalogInput4, NRF_COMP_INPUT_5 = COMP_PSEL_PSEL_AnalogInput5, NRF_COMP_INPUT_6 = COMP_PSEL_PSEL_AnalogInput6, NRF_COMP_INPUT_7 = COMP_PSEL_PSEL_AnalogInput7, NRF_COMP_VDD_DIV2 = COMP_PSEL_PSEL_VddDiv2, NRF_COMP_VDDH_DIV5 = COMP_PSEL_PSEL_VddhDiv5 }
	COMP analog pin selection. More...

enum	nrf_comp_ref_t { NRF_COMP_REF_Int1V2 = COMP_REFSEL_REFSEL_Int1V2, NRF_COMP_REF_Int1V8 = COMP_REFSEL_REFSEL_Int1V8, NRF_COMP_REF_Int2V4 = COMP_REFSEL_REFSEL_Int2V4, NRF_COMP_REF_VDD = COMP_REFSEL_REFSEL_VDD, NRF_COMP_REF_ARef = COMP_REFSEL_REFSEL_ARef }
	COMP reference selection. More...

enum	nrf_comp_ext_ref_t { NRF_COMP_EXT_REF_0 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference0, NRF_COMP_EXT_REF_1 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference1, NRF_COMP_EXT_REF_2 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference2, NRF_COMP_EXT_REF_3 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference3, NRF_COMP_EXT_REF_4 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference4, NRF_COMP_EXT_REF_5 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference5, NRF_COMP_EXT_REF_6 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference6, NRF_COMP_EXT_REF_7 = COMP_EXTREFSEL_EXTREFSEL_AnalogReference7 }
	COMP external analog reference selection. More...

enum	nrf_comp_main_mode_t { NRF_COMP_MAIN_MODE_SE = COMP_MODE_MAIN_SE, NRF_COMP_MAIN_MODE_Diff = COMP_MODE_MAIN_Diff }
	COMP main operation mode. More...

enum	nrf_comp_sp_mode_t { NRF_COMP_SP_MODE_Low = COMP_MODE_SP_Low, NRF_COMP_SP_MODE_Normal = COMP_MODE_SP_Normal, NRF_COMP_SP_MODE_High = COMP_MODE_SP_High }
	COMP speed and power mode. More...

enum	nrf_comp_hyst_t { NRF_COMP_HYST_NoHyst = COMP_HYST_HYST_NoHyst, NRF_COMP_HYST_50mV = COMP_HYST_HYST_Hyst50mV }
	COMP comparator hysteresis. More...

enum	nrf_isource_t { NRF_COMP_ISOURCE_Off = COMP_ISOURCE_ISOURCE_Off, NRF_COMP_ISOURCE_Ien2uA5 = COMP_ISOURCE_ISOURCE_Ien2mA5, NRF_COMP_ISOURCE_Ien5uA = COMP_ISOURCE_ISOURCE_Ien5mA, NRF_COMP_ISOURCE_Ien10uA = COMP_ISOURCE_ISOURCE_Ien10mA }
	COMP current source selection on analog input. More...

enum	nrf_comp_task_t { NRF_COMP_TASK_START = offsetof(NRF_COMP_Type, TASKS_START), NRF_COMP_TASK_STOP = offsetof(NRF_COMP_Type, TASKS_STOP), NRF_COMP_TASK_SAMPLE = offsetof(NRF_COMP_Type, TASKS_SAMPLE) }
	COMP tasks. More...

enum	nrf_comp_event_t { NRF_COMP_EVENT_READY = offsetof(NRF_COMP_Type, EVENTS_READY), NRF_COMP_EVENT_DOWN = offsetof(NRF_COMP_Type, EVENTS_DOWN), NRF_COMP_EVENT_UP = offsetof(NRF_COMP_Type, EVENTS_UP), NRF_COMP_EVENT_CROSS = offsetof(NRF_COMP_Type, EVENTS_CROSS) }
	COMP events. More...

Functions
__STATIC_INLINE void	nrf_comp_enable (void)
	Function for enabling the COMP peripheral.

__STATIC_INLINE void	nrf_comp_disable (void)
	Function for disabling the COMP peripheral.

__STATIC_INLINE bool	nrf_comp_enable_check (void)
	Function for checking if the COMP peripheral is enabled. More...

__STATIC_INLINE void	nrf_comp_ref_set (nrf_comp_ref_t reference)
	Function for setting the reference source. More...

__STATIC_INLINE void	nrf_comp_ext_ref_set (nrf_comp_ext_ref_t ext_ref)
	Function for setting the external analog reference source. More...

__STATIC_INLINE void	nrf_comp_th_set (nrf_comp_th_t threshold)
	Function for setting threshold voltages. More...

__STATIC_INLINE void	nrf_comp_main_mode_set (nrf_comp_main_mode_t main_mode)
	Function for setting the main mode. More...

__STATIC_INLINE void	nrf_comp_speed_mode_set (nrf_comp_sp_mode_t speed_mode)
	Function for setting the speed mode. More...

__STATIC_INLINE void	nrf_comp_hysteresis_set (nrf_comp_hyst_t hyst)
	Function for setting the hysteresis. More...

__STATIC_INLINE void	nrf_comp_isource_set (nrf_isource_t isource)
	Function for setting the current source on the analog input. More...

__STATIC_INLINE void	nrf_comp_input_select (nrf_comp_input_t input)
	Function for selecting the active input of the COMP. More...

__STATIC_INLINE uint32_t	nrf_comp_result_get (void)
	Function for getting the last COMP compare result. More...

__STATIC_INLINE void	nrf_comp_int_enable (uint32_t mask)
	Function for enabling interrupts from COMP. More...

__STATIC_INLINE void	nrf_comp_int_disable (uint32_t mask)
	Function for disabling interrupts from COMP. More...

__STATIC_INLINE bool	nrf_comp_int_enable_check (uint32_t mask)
	Function for getting the enabled interrupts of COMP. More...

__STATIC_INLINE uint32_t *	nrf_comp_task_address_get (nrf_comp_task_t task)
	Function for getting the address of the specified COMP task register. More...

__STATIC_INLINE uint32_t *	nrf_comp_event_address_get (nrf_comp_event_t event)
	Function for getting the address of the specified COMP event register. More...

__STATIC_INLINE void	nrf_comp_shorts_enable (uint32_t mask)
	Function for setting COMP shortcuts. More...

__STATIC_INLINE void	nrf_comp_shorts_disable (uint32_t mask)
	Function for clearing COMP shortcuts by mask. More...

__STATIC_INLINE void	nrf_comp_task_trigger (nrf_comp_task_t task)
	Function for setting the specified COMP task. More...

__STATIC_INLINE void	nrf_comp_event_clear (nrf_comp_event_t event)
	Function for clearing the specified COMP event. More...

__STATIC_INLINE bool	nrf_comp_event_check (nrf_comp_event_t event)
	Function for retrieving the state of the UARTE event. More...

Detailed Description

Hardware access layer (HAL) for managing the Comparator (COMP) peripheral.

Enumeration Type Documentation

enum nrf_comp_event_t

COMP events.

Enumerator
NRF_COMP_EVENT_READY	COMP is ready and output is valid.
NRF_COMP_EVENT_DOWN	Input voltage crossed the threshold going down.
NRF_COMP_EVENT_UP	Input voltage crossed the threshold going up.
NRF_COMP_EVENT_CROSS	Input voltage crossed the threshold in any direction.

enum nrf_comp_ext_ref_t

COMP external analog reference selection.

Enumerator
NRF_COMP_EXT_REF_0	Use AIN0 as external analog reference.
NRF_COMP_EXT_REF_1	Use AIN1 as external analog reference.
NRF_COMP_EXT_REF_2	Use AIN2 as external analog reference.
NRF_COMP_EXT_REF_3	Use AIN3 as external analog reference.
NRF_COMP_EXT_REF_4	Use AIN4 as external analog reference.
NRF_COMP_EXT_REF_5	Use AIN5 as external analog reference.
NRF_COMP_EXT_REF_6	Use AIN6 as external analog reference.
NRF_COMP_EXT_REF_7	Use AIN7 as external analog reference.

enum nrf_comp_hyst_t

COMP comparator hysteresis.

Enumerator
NRF_COMP_HYST_NoHyst	Comparator hysteresis disabled.
NRF_COMP_HYST_50mV	Comparator hysteresis enabled.

enum nrf_comp_input_t

COMP analog pin selection.

Enumerator
NRF_COMP_INPUT_0	AIN0 selected as analog input.
NRF_COMP_INPUT_1	AIN1 selected as analog input.
NRF_COMP_INPUT_2	AIN2 selected as analog input.
NRF_COMP_INPUT_3	AIN3 selected as analog input.
NRF_COMP_INPUT_4	AIN4 selected as analog input.
NRF_COMP_INPUT_5	AIN5 selected as analog input.
NRF_COMP_INPUT_6	AIN6 selected as analog input.
NRF_COMP_INPUT_7	AIN7 selected as analog input.
NRF_COMP_VDD_DIV2	VDD/2 selected as analog input.
NRF_COMP_VDDH_DIV5	VDDH/5 selected as analog input.

enum nrf_comp_main_mode_t

COMP main operation mode.

Enumerator
NRF_COMP_MAIN_MODE_SE	Single-ended mode.
NRF_COMP_MAIN_MODE_Diff	Differential mode.

enum nrf_comp_ref_t

COMP reference selection.

Enumerator
NRF_COMP_REF_Int1V2	VREF = internal 1.2 V reference (VDD >= 1.7 V).
NRF_COMP_REF_Int1V8	VREF = internal 1.8 V reference (VDD >= VREF + 0.2 V).
NRF_COMP_REF_Int2V4	VREF = internal 2.4 V reference (VDD >= VREF + 0.2 V).
NRF_COMP_REF_VDD	VREF = VDD.
NRF_COMP_REF_ARef	VREF = AREF (VDD >= VREF >= AREFMIN).

enum nrf_comp_sp_mode_t

COMP speed and power mode.

Enumerator
NRF_COMP_SP_MODE_Low	Low power mode.
NRF_COMP_SP_MODE_Normal	Normal mode.
NRF_COMP_SP_MODE_High	High-speed mode.

enum nrf_comp_task_t

COMP tasks.

Enumerator
NRF_COMP_TASK_START	COMP start sampling task.
NRF_COMP_TASK_STOP	COMP stop sampling task.
NRF_COMP_TASK_SAMPLE	Sample comparator value.

enum nrf_isource_t

COMP current source selection on analog input.

Enumerator
NRF_COMP_ISOURCE_Off	Current source disabled.
NRF_COMP_ISOURCE_Ien2uA5	Current source enabled (+/- 2.5 uA).
NRF_COMP_ISOURCE_Ien5uA	Current source enabled (+/- 5 uA).
NRF_COMP_ISOURCE_Ien10uA	Current source enabled (+/- 10 uA).

Function Documentation

__STATIC_INLINE bool nrf_comp_enable_check ( void )

Function for checking if the COMP peripheral is enabled.

Return values

true	The COMP peripheral is enabled.
false	The COMP peripheral is not enabled.

__STATIC_INLINE uint32_t* nrf_comp_event_address_get ( nrf_comp_event_t event )

Function for getting the address of the specified COMP event register.

Parameters

[in] event COMP event.

Returns: Address of the specified COMP event.

__STATIC_INLINE bool nrf_comp_event_check ( nrf_comp_event_t event )

Function for retrieving the state of the UARTE event.

Parameters

[in] event Event to be checked.

Return values

true	The event has been generated.
false	The event has not been generated.

__STATIC_INLINE void nrf_comp_event_clear ( nrf_comp_event_t event )

Function for clearing the specified COMP event.

Parameters

[in] event COMP event to be cleared.

__STATIC_INLINE void nrf_comp_ext_ref_set ( nrf_comp_ext_ref_t ext_ref )

Function for setting the external analog reference source.

Parameters

[in] ext_ref COMP external analog reference selection.

__STATIC_INLINE void nrf_comp_hysteresis_set ( nrf_comp_hyst_t hyst )

Function for setting the hysteresis.

Parameters

[in] hyst COMP comparator hysteresis.

__STATIC_INLINE void nrf_comp_input_select ( nrf_comp_input_t input )

Function for selecting the active input of the COMP.

Parameters

[in] input Input to be selected.

__STATIC_INLINE void nrf_comp_int_disable ( uint32_t mask )

Function for disabling interrupts from COMP.

Parameters

[in] mask Mask of interrupts to be disabled.

See Also: nrf_comp_int_enable_check

__STATIC_INLINE void nrf_comp_int_enable ( uint32_t mask )

Function for enabling interrupts from COMP.

Parameters

[in] mask Mask of interrupts to be enabled.

See Also: nrf_comp_int_enable_check

__STATIC_INLINE bool nrf_comp_int_enable_check ( uint32_t mask )

Function for getting the enabled interrupts of COMP.

Parameters

[in] mask Mask of interrupts to be checked.

Return values

true	At least one interrupt from the specified mask is enabled.
false	No interrupt provided by the specified mask are enabled.

__STATIC_INLINE void nrf_comp_isource_set ( nrf_isource_t isource )

Function for setting the current source on the analog input.

Parameters

[in] isource COMP current source selection on analog input.

__STATIC_INLINE void nrf_comp_main_mode_set ( nrf_comp_main_mode_t main_mode )

Function for setting the main mode.

Parameters

[in] main_mode COMP main operation mode.

__STATIC_INLINE void nrf_comp_ref_set ( nrf_comp_ref_t reference )

Function for setting the reference source.

Parameters

[in] reference COMP reference selection.

__STATIC_INLINE uint32_t nrf_comp_result_get ( void )

Function for getting the last COMP compare result.

Note: If VIN+ == VIN-, the return value depends on the previous result.

Returns: The last compare result. If 0, then VIN+ < VIN-. If 1, then VIN+ > VIN-.

__STATIC_INLINE void nrf_comp_shorts_disable ( uint32_t mask )

Function for clearing COMP shortcuts by mask.

Parameters

[in] mask Mask of shortcuts.

__STATIC_INLINE void nrf_comp_shorts_enable ( uint32_t mask )

Function for setting COMP shortcuts.

Parameters

[in] mask Mask of shortcuts.

__STATIC_INLINE void nrf_comp_speed_mode_set ( nrf_comp_sp_mode_t speed_mode )

Function for setting the speed mode.

Parameters

[in] speed_mode COMP speed and power mode.

__STATIC_INLINE uint32_t* nrf_comp_task_address_get ( nrf_comp_task_t task )

Function for getting the address of the specified COMP task register.

Parameters

[in] task COMP task.

Returns: Address of the specified COMP task.

__STATIC_INLINE void nrf_comp_task_trigger ( nrf_comp_task_t task )

Function for setting the specified COMP task.

Parameters

[in] task Task to be activated.

__STATIC_INLINE void nrf_comp_th_set ( nrf_comp_th_t threshold )

Function for setting threshold voltages.

Parameters

[in] threshold COMP VDOWN and VUP thresholds.

Data Structures

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

Function Documentation