SLIP protocol implementation used by HCI configuration

Macros
#define	HCI_SLIP_ENABLED
	Enabling HCI transport module. More...
#define	HCI_UART_BAUDRATE
	Default Baudrate. More...
#define	HCI_UART_FLOW_CONTROL
	Hardware Flow Control. More...
#define	HCI_UART_RX_PIN
	UART RX pin. More...
#define	HCI_UART_TX_PIN
	UART TX pin. More...
#define	HCI_UART_RTS_PIN
	UART RTS pin. More...
#define	HCI_UART_CTS_PIN
	UART CTS pin. More...

Detailed Description

Macro Definition Documentation

#define HCI_SLIP_ENABLED

Enabling HCI transport module.

Set to 1 to activate.

Note

This is an NRF_CONFIG macro.

#define HCI_UART_BAUDRATE

Default Baudrate.

Following options are available:

• 323584 - 1200 baud
• 643072 - 2400 baud
• 1290240 - 4800 baud
• 2576384 - 9600 baud
• 3862528 - 14400 baud
• 5152768 - 19200 baud
• 7716864 - 28800 baud
• 10289152 - 38400 baud
• 15400960 - 57600 baud
• 20615168 - 76800 baud
• 30801920 - 115200 baud (except nRF51 family)
• 30924800 - 115200 baud (Applicable devices only)
• 61865984 - 230400 baud
• 67108864 - 250000 baud
• 121634816 - 460800 baud
• 251658240 - 921600 baud
• 268435456 - 1000000 baud

Note

This is an NRF_CONFIG macro.

#define HCI_UART_CTS_PIN

UART CTS pin.

Note

This is an NRF_CONFIG macro.

#define HCI_UART_FLOW_CONTROL

Hardware Flow Control.

Following options are available:

• 0 - Disabled
• 1 - Enabled

Note

This is an NRF_CONFIG macro.

#define HCI_UART_RTS_PIN

UART RTS pin.

Note

This is an NRF_CONFIG macro.

#define HCI_UART_RX_PIN

UART RX pin.

Note

This is an NRF_CONFIG macro.

#define HCI_UART_TX_PIN

UART TX pin.

Note

This is an NRF_CONFIG macro.