Bond Management Service (BMS) module. More...

Modules
	BMS feature bits

Data Structures
struct	nrf_ble_bms_features_t
	Supported features. More...

struct	nrf_ble_bms_auth_code_t
	Received authorization codes. More...

struct	nrf_ble_bms_evt_t
	BMS events. More...

struct	nrf_ble_bms_ctrlpt_t
	BMS control points. More...

struct	nrf_ble_bms_bond_cbs_t
	BMS bond management callbacks. More...

struct	nrf_ble_bms_init_t
	BMS initialization structure that contains all information needed to initialize the service. More...

struct	nrf_ble_bms_s
	Status information for the service. More...

Macros
#define	NRF_BLE_BMS_DEF(_name)
	Macro for defining a nrf_ble_bms instance. More...

#define	NRF_BLE_BMS_FEATURE_LEN 3
	Length of the Feature Characteristic (in bytes).

#define	NRF_BLE_BMS_CTRLPT_MAX_LEN 128
	Maximum length of the Bond Management Control Point Characteristic (in bytes).

#define	NRF_BLE_BMS_CTRLPT_MIN_LEN 1
	Minimum length of the Bond Management Control Point Characteristic (in bytes).

#define	NRF_BLE_BMS_AUTH_CODE_MAX_LEN NRF_BLE_BMS_CTRLPT_MAX_LEN - 1
	Maximum length of the Bond Management Control Point Authorization Code (in bytes).

#define	NRF_BLE_BMS_OPCODE_NOT_SUPPORTED (BLE_GATT_STATUS_ATTERR_APP_BEGIN + 0)
	Error sent back when receiving a control point write with an unsupported opcode.

#define	NRF_BLE_BMS_OPERATION_FAILED (BLE_GATT_STATUS_ATTERR_APP_BEGIN + 1)
	Error sent back when a control point operation fails.

Typedefs
typedef struct nrf_ble_bms_s	nrf_ble_bms_t

typedef void(*	nrf_ble_bms_bond_handler_t )(nrf_ble_bms_t const *p_bms)
	BMS event handler type.

typedef void(*	ble_bms_evt_handler_t )(nrf_ble_bms_t p_bms, nrf_ble_bms_evt_t p_evt)
	BMS event handler type. The event handler returns a BLE GATT status code.

Enumerations
enum	nrf_ble_bms_op_t { NRF_BLE_BMS_OP_DEL_BOND_REQ_DEVICE_BR_LE = 0x01, NRF_BLE_BMS_OP_DEL_BOND_REQ_DEVICE_BR_ONLY = 0x02, NRF_BLE_BMS_OP_DEL_BOND_REQ_DEVICE_LE_ONLY = 0x03, NRF_BLE_BMS_OP_DEL_ALL_BONDS_ON_SERVER_BR_LE = 0x04, NRF_BLE_BMS_OP_DEL_ALL_BONDS_ON_SERVER_BR_ONLY = 0x05, NRF_BLE_BMS_OP_DEL_ALL_BONDS_ON_SERVER_LE_ONLY = 0x06, NRF_BLE_BMS_OP_DEL_ALL_BUT_ACTIVE_BOND_BR_LE = 0x07, NRF_BLE_BMS_OP_DEL_ALL_BUT_ACTIVE_BOND_BR_ONLY = 0x08, NRF_BLE_BMS_OP_DEL_ALL_BUT_ACTIVE_BOND_LE_ONLY = 0x09, NRF_BLE_BMS_OP_NONE = 0xFF }
	BMS Control Point opcodes. More...

enum	nrf_ble_bms_auth_status_t { NRF_BLE_BMS_AUTH_STATUS_ALLOWED, NRF_BLE_BMS_AUTH_STATUS_DENIED, NRF_BLE_BMS_AUTH_STATUS_PENDING }
	Authorization status values. More...

enum	nrf_ble_bms_evt_type_t { NRF_BLE_BMS_EVT_AUTH }
	BMS event types. More...

Functions
ret_code_t	nrf_ble_bms_auth_response (nrf_ble_bms_t *p_bms, bool authorize)
	Function for responding to an authorization request. More...

ret_code_t	nrf_ble_bms_init (nrf_ble_bms_t p_bms, nrf_ble_bms_init_t p_bms_init)
	Function for initializing the Bond Management Service. More...

ret_code_t	nrf_ble_bms_set_conn_handle (nrf_ble_bms_t *p_bms, uint16_t conn_handle)
	Function for assigning handles to the Bond Management Service instance. More...

void	nrf_ble_bms_on_ble_evt (ble_evt_t const p_ble_evt, void p_context)
	Function for handling Bond Management BLE stack events. More...

uint16_t	nrf_ble_bms_on_qwr_evt (nrf_ble_bms_t p_bms, nrf_ble_qwr_t p_qwr, nrf_ble_qwr_evt_t *p_evt)
	Function for handling events from the Queued Writes module. More...

Detailed Description

Bond Management Service (BMS) module.

This module implements the Bond Management Service (BMS). By writing to the Bond Management Control Point, the connected peer can request the deletion of bond information from the device. If authorization is configured, the application must supply an event handler for receiving Bond Management Service events. Using this handler, the service requests authorization when a procedure is requested by writing to the Bond Management Control Point.

Note: The application must register this module as BLE event observer using the NRF_SDH_BLE_OBSERVER macro. Example:
nrf_ble_bms_t instance;

NRF_SDH_BLE_OBSERVER(anything, NRF_BLE_BMS_BLE_OBSERVER_PRIO,

nrf_ble_bms_on_ble_evt, &instance);

Macro Definition Documentation

#define NRF_BLE_BMS_DEF ( _name )

Macro for defining a nrf_ble_bms instance.

Parameters

_name Name of the instance.

Enumeration Type Documentation

enum nrf_ble_bms_auth_status_t

Authorization status values.

Enumerator
NRF_BLE_BMS_AUTH_STATUS_ALLOWED	Authorization is granted.
NRF_BLE_BMS_AUTH_STATUS_DENIED	Authorization is denied.
NRF_BLE_BMS_AUTH_STATUS_PENDING	Authorization is pending.

enum nrf_ble_bms_evt_type_t

BMS event types.

Enumerator
NRF_BLE_BMS_EVT_AUTH	Event that indicates that the application shall verify the supplied authentication code.

enum nrf_ble_bms_op_t

BMS Control Point opcodes.

Enumerator
NRF_BLE_BMS_OP_DEL_BOND_REQ_DEVICE_BR_LE	Initiates the procedure to delete the bond of the requesting device on BR/EDR and LE transports.
NRF_BLE_BMS_OP_DEL_BOND_REQ_DEVICE_BR_ONLY	Initiates the procedure to delete the bond of the requesting device on BR/EDR transport.
NRF_BLE_BMS_OP_DEL_BOND_REQ_DEVICE_LE_ONLY	Initiates the procedure to delete the bond of the requesting device on LE transport.
NRF_BLE_BMS_OP_DEL_ALL_BONDS_ON_SERVER_BR_LE	Initiates the procedure to delete all bonds on the device on BR/EDR and LE transports.
NRF_BLE_BMS_OP_DEL_ALL_BONDS_ON_SERVER_BR_ONLY	Initiates the procedure to delete all bonds on the device on BR/EDR transport.
NRF_BLE_BMS_OP_DEL_ALL_BONDS_ON_SERVER_LE_ONLY	Initiates the procedure to delete all bonds on the device on LE transport.
NRF_BLE_BMS_OP_DEL_ALL_BUT_ACTIVE_BOND_BR_LE	Initiates the procedure to delete all bonds except for the one of the requesting device on BR/EDR and LE transports.
NRF_BLE_BMS_OP_DEL_ALL_BUT_ACTIVE_BOND_BR_ONLY	Initiates the procedure to delete all bonds except for the one of the requesting device on BR/EDR transport.
NRF_BLE_BMS_OP_DEL_ALL_BUT_ACTIVE_BOND_LE_ONLY	Initiates the procedure to delete all bonds except for the one of the requesting device on LE transport.
NRF_BLE_BMS_OP_NONE	Indicates an invalid opcode or no pending opcode.

Function Documentation

ret_code_t nrf_ble_bms_auth_response	(	nrf_ble_bms_t *	p_bms,
		bool	authorize
	)

Function for responding to an authorization request.

This function should be called when receiving the NRF_BLE_BMS_EVT_AUTH event to respond to the service with an authorization result.

Parameters

[in]	p_bms	BMS structure.
[in]	authorize	Authorization response. True if the authorization is considered successful.

Return values

NRF_ERROR_NULL	If `p_bms` was NULL.
NRF_ERROR_INVALID_STATE	If no authorization request was pending.
NRF_SUCCESS	If the response was received successfully.

ret_code_t nrf_ble_bms_init	(	nrf_ble_bms_t *	p_bms,
		nrf_ble_bms_init_t *	p_bms_init
	)

Function for initializing the Bond Management Service.

Parameters

[out]	p_bms	BMS structure.
[in]	p_bms_init	Information needed to initialize the service.

Return values

NRF_ERROR_NULL	If `p_bms` or `p_bms_init` was NULL.
NRF_SUCCESS	If the service was initialized successfully. Otherwise, an error code is returned.

void nrf_ble_bms_on_ble_evt	(	ble_evt_t const *	p_ble_evt,
		void *	p_context
	)

Function for handling Bond Management BLE stack events.

This function handles all events from the BLE stack that are of interest to the Bond Management Service.

Parameters

[in]	p_ble_evt	Event received from the BLE stack.
[in]	p_context	BMS structure.

uint16_t nrf_ble_bms_on_qwr_evt	(	nrf_ble_bms_t *	p_bms,
		nrf_ble_qwr_t *	p_qwr,
		nrf_ble_qwr_evt_t *	p_evt
	)

Function for handling events from the Queued Writes module.

Parameters

[in]	p_bms	BMS structure.
[in]	p_qwr	Queued Write structure.
[in]	p_evt	Event received from the Queued Writes module.

Return values

BLE_GATT_STATUS_SUCCESS	If the received event is accepted.
NRF_BLE_QWR_REJ_REQUEST_ERR_CODE	If the received event is not relevant for any of this module's attributes.
BLE_BMS_OPCODE_NOT_SUPPORTED	If the received opcode is not supported.
BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION	If the application handler returns that the authorization code is not valid.

ret_code_t nrf_ble_bms_set_conn_handle	(	nrf_ble_bms_t *	p_bms,
		uint16_t	conn_handle
	)

Function for assigning handles to the Bond Management Service instance.

Call this function when a link with a peer has been established to associate the link to this instance of the module.

Note: Currently this function is deprecated.

Parameters

[in]	p_bms	Pointer to the BMS structure instance to associate.
[in]	conn_handle	Connection handle to be associated with the given BMS instance.

Return values

NRF_ERROR_NULL	If `p_bms` was NULL.
NRF_SUCCESS	If the operation was successful.

Modules

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation