Macros
#define	NRF_LOG_BACKEND_FLASH_ENABLED
	Enable flash backend. More...

#define	NRF_LOG_BACKEND_FLASH_CLI_CMDS
	Enable CLI commands for this module. More...

#define	NRF_LOG_BACKEND_FLASHLOG_ENABLED
	Enable flashlog backend. More...

#define	NRF_LOG_BACKEND_FLASHLOG_QUEUE_SIZE
	Logger messages queue size. More...

#define	NRF_LOG_BACKEND_CRASHLOG_ENABLED
	Enable crashlog backend. More...

#define	NRF_LOG_BACKEND_CRASHLOG_FIFO_SIZE
	Number of log messages held to be flushed in panic. More...

#define	NRF_LOG_BACKEND_FLASH_SER_BUFFER_SIZE
	Size of the buffer used for serialize log message. More...

#define	NRF_LOG_BACKEND_FLASH_START_PAGE
	Starting page. More...

#define	NRF_LOG_BACKEND_PAGES
	Number of pages. More...

Detailed Description

Macro Definition Documentation

#define NRF_LOG_BACKEND_CRASHLOG_ENABLED

Enable crashlog backend.

Set to 1 to activate.

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_CRASHLOG_FIFO_SIZE

Number of log messages held to be flushed in panic.

Crashlog FIFO always keeps a defined number of the most recent logs (severity level is set on runtime). Note that the FIFO holds logger messages and thus the FIFO size determines increasing the pool of logger messages (see log message pool configuration).

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_FLASH_CLI_CMDS

Enable CLI commands for this module.

Set to 1 to activate.

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_FLASH_ENABLED

Enable flash backend.

Set to 1 to activate.

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_FLASH_SER_BUFFER_SIZE

Size of the buffer used for serialize log message.

Message is trimmed if it is longer. It may happen in case of hexdump message. Buffer size must be multiple of 4.

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_FLASH_START_PAGE

Starting page.

If 0, then pages directly after the application are used.

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_FLASHLOG_ENABLED

Enable flashlog backend.

Set to 1 to activate.

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_FLASHLOG_QUEUE_SIZE

Logger messages queue size.

Queue holds log messages pending to be written to flash. Note that the queue holds logger messages and thus the queue size determines increasing the pool of logger messages (see log message pool configuration).

Note: This is an NRF_CONFIG macro.

#define NRF_LOG_BACKEND_PAGES

Number of pages.

Note: This is an NRF_CONFIG macro.

Macros

Detailed Description

Macro Definition Documentation