Connectivity command request decoders and command response encoders. More...
Functions | |
uint32_t | ant_enable_req_dec (uint8_t const *const p_buf, uint32_t packet_len, ANT_ENABLE **const pp_ant_enable_params) |
Decodes sd_ant_enable command request. More... | |
uint32_t | ant_enable_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_enable command response. More... | |
uint32_t | ant_channel_assign_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_type, uint8_t *const p_network, uint8_t *const p_ext_assign) |
Decodes sd_ant_channel_assign command request. More... | |
uint32_t | ant_channel_assign_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_assign command response. More... | |
uint32_t | ant_channel_open_with_offset_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint16_t *const p_usOffset) |
Decodes sd_ant_channel_open command request. More... | |
uint32_t | ant_channel_open_with_offset_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_open command response. More... | |
uint32_t | ant_channel_id_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint16_t *const p_device_number, uint8_t *const p_device_type, uint8_t *const p_transmission_type) |
Decodes sd_ant_channel_id_set command request. More... | |
uint32_t | ant_channel_id_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_id_set command response. More... | |
uint32_t | ant_channel_period_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint16_t *const p_period) |
Decodes sd_ant_channel_period_set command request. More... | |
uint32_t | ant_channel_period_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_period_set command response. More... | |
uint32_t | ant_channel_radio_freq_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_freq) |
Decodes sd_ant_channel_radio_freq_set command request. More... | |
uint32_t | ant_channel_radio_freq_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_radio_freq_set command response. More... | |
uint32_t | ant_broadcast_message_tx_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_size, uint8_t **const pp_mesg) |
Decodes sd_ant_broadcast_message_tx command request. More... | |
uint32_t | ant_broadcast_message_tx_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_broadcast_message_tx command response. More... | |
uint32_t | ant_acknowledge_message_tx_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_size, uint8_t **const pp_mesg) |
Decodes sd_ant_acknowledge_message_tx command request. More... | |
uint32_t | ant_acknowledge_message_tx_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_acknowledge_message_tx command response. More... | |
uint32_t | ant_channel_unassign_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_channel_unassign command request. More... | |
uint32_t | ant_channel_unassign_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_unassign command response. More... | |
uint32_t | ant_channel_close_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_channel_close command request. More... | |
uint32_t | ant_channel_close_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_close command response. More... | |
uint32_t | ant_network_address_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_network, uint8_t **const pp_network_key) |
Decodes sd_ant_network_address_set command request. More... | |
uint32_t | ant_network_address_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_network_address_set command response. More... | |
uint32_t | ant_channel_radio_tx_power_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_tx_power, uint8_t *const p_custom_tx_power) |
Decodes sd_ant_channel_radio_tx_power_set command request. More... | |
uint32_t | ant_channel_radio_tx_power_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_radio_tx_power_set command response. More... | |
uint32_t | ant_channel_rx_search_timeout_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_timeout) |
Decodes sd_ant_channel_rx_search_timeout_set command request. More... | |
uint32_t | ant_channel_rx_search_timeout_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_rx_search_timeout_set command response. More... | |
uint32_t | ant_channel_low_priority_rx_search_timeout_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_timeout) |
Decodes sd_ant_channel_low_priority_rx_search_timeout_set command request. More... | |
uint32_t | ant_channel_low_priority_rx_search_timeout_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_channel_low_priority_rx_search_timeout_set command response. More... | |
uint32_t | ant_prox_search_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_prox_threshold, uint8_t *const p_custom_prox_threshold) |
Decodes sd_ant_prox_search_set command request. More... | |
uint32_t | ant_prox_search_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_prox_search_set command response. More... | |
uint32_t | ant_search_waveform_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint16_t *const p_waveform) |
Decodes sd_ant_search_waveform_set command request. More... | |
uint32_t | ant_search_waveform_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_search_waveform_set command response. More... | |
uint32_t | ant_channel_id_get_req_dec (uint8_t const *const p_buf, uint16_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_channel_id_get command request. More... | |
uint32_t | ant_channel_id_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint16_t const *const p_device_number, uint8_t const *const p_device_type, uint8_t const *const p_transmit_type) |
Encodes sd_ant_channel_id_get command response. More... | |
uint32_t | ant_channel_radio_freq_get_req_dec (uint8_t const *const p_buf, uint16_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_channel_radio_freq_get command request. More... | |
uint32_t | ant_channel_radio_freq_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint8_t const *const p_r_freq) |
Encodes sd_ant_channel_radio_freq_get command response. More... | |
uint32_t | ant_channel_period_get_req_dec (uint8_t const *const p_buf, uint16_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_channel_period_get command request. More... | |
uint32_t | ant_channel_period_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint16_t const *const p_period) |
Encodes sd_ant_channel_period_get command response. More... | |
uint32_t | ant_search_channel_priority_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_search_priority) |
Decodes sd_ant_search_channel_priority_set command request. More... | |
uint32_t | ant_search_channel_priority_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_search_channel_priority_set command response. More... | |
uint32_t | ant_active_search_sharing_cycles_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_cycles) |
Decodes sd_ant_active_search_sharing_cycles_set command request. More... | |
uint32_t | ant_active_search_sharing_cycles_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_active_search_sharing_cycles_set command response. More... | |
uint32_t | ant_lib_config_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_ant_lib_config) |
Decodes sd_ant_lib_config_set command request. More... | |
uint32_t | ant_lib_config_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_lib_config_set command response. More... | |
uint32_t | ant_active_search_sharing_cycles_get_req_dec (uint8_t const *const p_buf, uint16_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_active_search_sharing_cycles_get command request. More... | |
uint32_t | ant_active_search_sharing_cycles_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint8_t const *const p_cycles) |
Encodes sd_ant_active_search_sharing_cycles_get command response. More... | |
uint32_t | ant_lib_config_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint8_t const *const p_ant_lib_config) |
Encodes sd_ant_lib_config_get command response. More... | |
uint32_t | ant_lib_config_clear_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_ant_lib_config) |
Decodes sd_ant_lib_config_clear command request. More... | |
uint32_t | ant_lib_config_clear_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_lib_config_clear command response. More... | |
uint32_t | ant_stack_reset_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_stack_reset command response. More... | |
uint32_t | ant_rx_scan_mode_start_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_sync_channel_packets_only) |
Decodes sd_ant_rx_scan_mode_start command request. More... | |
uint32_t | ant_rx_scan_mode_start_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_rx_scan_mode_start command response. More... | |
uint32_t | ant_id_list_add_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t **const pp_dev_id, uint8_t *const p_list_index) |
Decodes sd_ant_id_list_add command request. More... | |
uint32_t | ant_id_list_add_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_id_list_add command response. More... | |
uint32_t | ant_id_list_config_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_id_list_size, uint8_t *const p_inc_exc_flag) |
Decodes sd_ant_id_list_config command request. More... | |
uint32_t | ant_id_list_config_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_id_list_add command response. More... | |
uint32_t | ant_channel_status_get_req_dec (uint8_t const *const p_buf, uint16_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_channel_status_get command request. More... | |
uint32_t | ant_channel_status_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint8_t const *const p_status) |
Encodes sd_ant_channel_status_get command response. More... | |
uint32_t | ant_cw_test_mode_init_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_cw_test_mode_init command response. More... | |
uint32_t | ant_cw_test_mode_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_radio_freq, uint8_t *const p_tx_power, uint8_t *const p_custom_tx_power, uint8_t *const p_mode) |
Decodes sd_ant_cw_test_mode command request. More... | |
uint32_t | ant_cw_test_mode_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_cw_test_mode command response. More... | |
uint32_t | ant_version_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint8_t const *const p_version) |
Encodes sd_ant_version_get command response. More... | |
uint32_t | ant_capabilities_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint8_t const *const p_capabilities) |
Encodes sd_ant_capabilities_get command response. More... | |
uint32_t | ant_crypto_channel_enable_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, uint8_t *const p_enable, uint8_t *const p_key_num, uint8_t *const p_decimation_rate) |
Decodes sd_ant_crypto_channel_enable command request. More... | |
uint32_t | ant_crypto_channel_enable_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_crypto_channel_enable command response. More... | |
uint32_t | ant_adv_burst_config_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_config, uint8_t *const p_size) |
Decodes sd_ant_adv_burst_config_set command request. More... | |
uint32_t | ant_adv_burst_config_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_adv_burst_config_set command response. More... | |
uint32_t | ant_crypto_key_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_key_num, uint8_t **const pp_key) |
Decodes sd_ant_crypto_key_set command request. More... | |
uint32_t | ant_crypto_key_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_crypto_key_set command response. More... | |
uint32_t | ant_crypto_info_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_type, uint8_t **const pp_info) |
Decodes sd_ant_crypto_info_set command request. More... | |
uint32_t | ant_crypto_info_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_crypto_info_set command response. More... | |
uint32_t | ant_crypto_info_get_req_dec (uint8_t const *const p_buf, uint16_t packet_len, uint8_t *const p_type) |
Decodes sd_ant_crypto_info_get command request. More... | |
uint32_t | ant_crypto_info_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, uint8_t type, uint8_t const *const p_info) |
Encodes sd_ant_crypto_info_get command response. More... | |
uint32_t | ant_coex_config_set_req_dec (uint8_t const *const p_buf, uint32_t packet_len, uint8_t *const p_channel, ANT_BUFFER_PTR *const p_coex_config, ANT_BUFFER_PTR *const p_adv_coex_config) |
Decodes sd_ant_coex_config_set command request. More... | |
uint32_t | ant_coex_config_set_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len) |
Encodes sd_ant_coex_config_set command response. More... | |
uint32_t | ant_coex_config_get_req_dec (uint8_t const *const p_buf, uint16_t packet_len, uint8_t *const p_channel) |
Decodes sd_ant_coex_config_get command request. More... | |
uint32_t | ant_coex_config_get_rsp_enc (uint32_t return_code, uint8_t *const p_buf, uint32_t *const p_buf_len, ANT_BUFFER_PTR *const p_coex_config, ANT_BUFFER_PTR *const p_adv_coex_config) |
Encodes sd_ant_coex_config_get command response. More... | |
Connectivity command request decoders and command response encoders.
uint32_t ant_acknowledge_message_tx_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_size, | ||
uint8_t **const | pp_mesg | ||
) |
Decodes sd_ant_acknowledge_message_tx command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel to send the data on will be set. |
[out] | p_size | Pointer to an unsigned char (1 octet) where the size of the message will be set. |
[out] | pp_mesg | Pointer to pointer to the buffer where the acknowledge message will be set (array must be 8 octets). |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_acknowledge_message_tx_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_acknowledge_message_tx command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_active_search_sharing_cycles_get_req_dec | ( | uint8_t const *const | p_buf, |
uint16_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_active_search_sharing_cycles_get command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_active_search_sharing_cycles_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint8_t const *const | p_cycles | ||
) |
Encodes sd_ant_active_search_sharing_cycles_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_cycles | Pointer to cycles. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_active_search_sharing_cycles_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_cycles | ||
) |
Decodes sd_ant_active_search_sharing_cycles_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
[out] | p_cycles | Pointer to an unsigned char (1 octet) where the numbe of cycles will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_active_search_sharing_cycles_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_active_search_sharing_cycles_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_adv_burst_config_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_config, | ||
uint8_t *const | p_size | ||
) |
Decodes sd_ant_adv_burst_config_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_config | Pointer to the buffer where advanced burst configuration will be set. |
[out] | p_size | Pointer to an unsigned char (1 octet) where the size of the configuration parameter buffer will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_adv_burst_config_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_adv_burst_config_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_broadcast_message_tx_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_size, | ||
uint8_t **const | pp_mesg | ||
) |
Decodes sd_ant_broadcast_message_tx command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel to send the data on will be set. |
[out] | p_size | Pointer to an unsigned char (1 octet) where the size of the message will be set. |
[out] | pp_mesg | Pointer to pointer to the buffer where the broadcast message will be set (array must be 8 octets). |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_broadcast_message_tx_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_broadcast_message_tx command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_capabilities_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint8_t const *const | p_capabilities | ||
) |
Encodes sd_ant_capabilities_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_capabilities | Pointer to ant capabilities buffer. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_assign_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_type, | ||
uint8_t *const | p_network, | ||
uint8_t *const | p_ext_assign | ||
) |
Decodes sd_ant_channel_assign command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel to be assigned will be set. |
[out] | p_type | Pointer to an unsigned char (1 octet) where the channel type to be assigned will be set. |
[out] | p_network | Pointer to an unsigned char (1 octet) where the network key to associate with the channel will be set. |
[out] | p_ext_assign | Pointer to a bit field (1 octet) where an extended assign will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_assign_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_assign command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_close_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_channel_close command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel to be closed will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_close_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_close command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_id_get_req_dec | ( | uint8_t const *const | p_buf, |
uint16_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_channel_id_get command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_id_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint16_t const *const | p_device_number, | ||
uint8_t const *const | p_device_type, | ||
uint8_t const *const | p_transmit_type | ||
) |
Encodes sd_ant_channel_id_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_device_number | Pointer to device number |
[in] | p_device_type | Pointer to device type |
[in] | p_transmit_type | Pointer to transmit type |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_id_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint16_t *const | p_device_number, | ||
uint8_t *const | p_device_type, | ||
uint8_t *const | p_transmission_type | ||
) |
Decodes sd_ant_channel_id_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
[out] | p_device_number | Pointer to an unsigned short (2 octets) where the device number will be set. |
[out] | p_device_type | Pointer to an an unsigned char (1 octet) where the device type will be set. |
[out] | p_transmission_type | Pointer to an unsigned char (1 octet) where the transmission type will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_id_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_id_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_low_priority_rx_search_timeout_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_timeout | ||
) |
Decodes sd_ant_channel_low_priority_rx_search_timeout_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
[out] | p_timeout | Pointer to an unsigned char (1 octet) where the time-out value will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_low_priority_rx_search_timeout_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_low_priority_rx_search_timeout_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_open_with_offset_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint16_t *const | p_usOffset | ||
) |
Decodes sd_ant_channel_open command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel to be opened will be set. |
[out] | p_usOffset | Pointer to a channel start time offset value. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_open_with_offset_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_open command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_period_get_req_dec | ( | uint8_t const *const | p_buf, |
uint16_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_channel_period_get command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_period_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint16_t const *const | p_period | ||
) |
Encodes sd_ant_channel_period_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_period | Pointer to period |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_period_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint16_t *const | p_period | ||
) |
Decodes sd_ant_channel_period_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number associated with the period will be set. |
[out] | p_period | Pointer to an unsigned short (2 octets) where the period will be set. Value is in 32 kHz counts (usPeriod/32768 s). |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_period_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_period_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_radio_freq_get_req_dec | ( | uint8_t const *const | p_buf, |
uint16_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_channel_radio_freq_get command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_radio_freq_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint8_t const *const | p_r_freq | ||
) |
Encodes sd_ant_channel_radio_freq_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_r_freq | Pointer to radio frequency |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_radio_freq_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_freq | ||
) |
Decodes sd_ant_channel_radio_freq_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number associated with the radio frequency will be set. |
[out] | p_freq | Pointer to an unsigned char (1 octet) where the radio frequency will be set. Value is offset from 2400 MHz (eg. 2466 MHz, ucFreq = 66). |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_radio_freq_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_radio_freq_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_radio_tx_power_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_tx_power, | ||
uint8_t *const | p_custom_tx_power | ||
) |
Decodes sd_ant_channel_radio_tx_power_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number to assign the radio TX power will be set. |
[out] | p_tx_power | Pointer to an unsigned char (1 octet) where the ANT transmit power index will be set. See Radio TX Power Definitions in ant_parameters.h. |
[out] | p_custom_tx_power | Pointer to an unsigned char (1 octet) where the custom nRF transmit power as defined in nrf51_bitfields.h will be set. Only applicable if tx_power is set to custom TX power selection. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_radio_tx_power_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_radio_tx_power_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_rx_search_timeout_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_timeout | ||
) |
Decodes sd_ant_channel_rx_search_timeout_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
[out] | p_timeout | Pointer to an unsigned char (1 octet) where the time-out value will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_rx_search_timeout_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_rx_search_timeout_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_status_get_req_dec | ( | uint8_t const *const | p_buf, |
uint16_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_channel_status_get command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_status_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint8_t const *const | p_status | ||
) |
Encodes sd_ant_channel_status_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_status | Pointer to status |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_channel_unassign_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_channel_unassign command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel to be unassigned will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_channel_unassign_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_channel_unassign command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_coex_config_get_req_dec | ( | uint8_t const *const | p_buf, |
uint16_t | packet_len, | ||
uint8_t *const | p_channel | ||
) |
Decodes sd_ant_coex_config_get command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_coex_config_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
ANT_BUFFER_PTR *const | p_coex_config, | ||
ANT_BUFFER_PTR *const | p_adv_coex_config | ||
) |
Encodes sd_ant_coex_config_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_coex_config | Pointer to the coexistence configuration. |
[in] | p_adv_coex_config | Pointer to the advanced coexistence configuration. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_coex_config_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
ANT_BUFFER_PTR *const | p_coex_config, | ||
ANT_BUFFER_PTR *const | p_adv_coex_config | ||
) |
Decodes sd_ant_coex_config_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[in] | p_channel | Pointer to an unsigned char (1 octet) where the channel for which the coexistence configuration is to be set will be copied. |
[in] | p_coex_config | Pointer to a buffer where the coexistence configuration to be set will be copied. |
[in] | p_adv_coex_config | Pointer to a buffer where the advanced coexistence configuration to be set will be copied. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_coex_config_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_coex_config_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_crypto_channel_enable_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_enable, | ||
uint8_t *const | p_key_num, | ||
uint8_t *const | p_decimation_rate | ||
) |
Decodes sd_ant_crypto_channel_enable command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel in which encryption mode is set will be copied to. |
[out] | p_enable | Pointer to an unsigned char (1 octet) where the encryption mode will be set. |
[out] | p_key_num | Pointer to an unsigned char (1 octet) where the key index of the 128-bit key to be used for encryption will be set. |
[out] | p_decimation_rate | Pointer to an unsigned char (1 octet) where the decimate rate to apply for encrypted slave channel will be set. Must be > 0. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_crypto_channel_enable_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_crypto_channel_enable command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_crypto_info_get_req_dec | ( | uint8_t const *const | p_buf, |
uint16_t | packet_len, | ||
uint8_t *const | p_type | ||
) |
Decodes sd_ant_crypto_info_get command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_type | Pointer to an unsigned char (1 octet) where the type of information being set will be copied. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_crypto_info_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint8_t | type, | ||
uint8_t const *const | p_info | ||
) |
Encodes sd_ant_crypto_info_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | type | The type of information being set. |
[in] | p_info | Pointer to info buffer. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_crypto_info_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_type, | ||
uint8_t **const | pp_info | ||
) |
Decodes sd_ant_crypto_info_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_type | Pointer to an unsigned char (1 octet) where the type of information being set will be copied. |
[out] | pp_info | Pointer to pointer to buffer where information being set will be copied. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_crypto_info_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_crypto_info_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_crypto_key_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_key_num, | ||
uint8_t **const | pp_key | ||
) |
Decodes sd_ant_crypto_key_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_key_num | Pointer to an unsigned char (1 octet) where the key index for assignment will be set. |
[out] | pp_key | Pointer to pointer to buffer (16 octets) where the 128-bit AES key to be assigned to the key index will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_crypto_key_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_crypto_key_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_cw_test_mode_init_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_cw_test_mode_init command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_cw_test_mode_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_radio_freq, | ||
uint8_t *const | p_tx_power, | ||
uint8_t *const | p_custom_tx_power, | ||
uint8_t *const | p_mode | ||
) |
Decodes sd_ant_cw_test_mode command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_radio_freq | Pointer to an unsigned char (1 octet) where the radio frequency offset from 2400 MHz for continuous wave mode will be set. (eg. 2466 MHz, ucRadioFreq = 66). |
[out] | p_tx_power | Pointer to an unsigned char (1 octet) where the ANT transmit power index for continuous wave mode will be set. See Radio TX Power Definitions in ant_parameters.h |
[out] | p_custom_tx_power | Pointer to an unsigned char (1 octet) where the custom nRF transmit power as defined in nrf51_bitfields.h will be set. Only applicable if ucTxPower is set to custom TX power selection. |
[out] | p_mode | Pointer to an unsigned char (1 octet) where the test mode type will be set. |
[in] | p_buf | Pointer to buffer where encoded data command will be returned. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_cw_test_mode_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_cw_test_mode command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_enable_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
ANT_ENABLE **const | pp_ant_enable_params | ||
) |
Decodes sd_ant_enable command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | pp_ant_enable_params | Pointer to pointer to ANT_ENABLE. It will be set to NULL if p_ant_enable_params is not present in the packet. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_enable_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_enable command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_id_list_add_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t **const | pp_dev_id, | ||
uint8_t *const | p_list_index | ||
) |
Decodes sd_ant_id_list_add command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number to add the list entry to will be set. |
[out] | pp_dev_id | Pointer to pointer to where the Dev ID will be stored. |
[out] | p_list_index | Pointer to an unsigned char (1 octet) where the list index (0-3), will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_id_list_add_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_id_list_add command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_id_list_config_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_id_list_size, | ||
uint8_t *const | p_inc_exc_flag | ||
) |
Decodes sd_ant_id_list_config command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) wher the channel number of the device ID list will be stored. |
[out] | p_id_list_size | Pointer to an unsigned char (1 octet) where the size of the inclusion or exclusion list (0-4) will be stored. |
[out] | p_inc_exc_flag | Pointer to an unsigned char (1 octet) where the type of list will be stored. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_id_list_config_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_id_list_add command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_lib_config_clear_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_ant_lib_config | ||
) |
Decodes sd_ant_lib_config_clear command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_ant_lib_config | Pointer to an unsigned char (1 octet) where the ANT lib config bit(s) to clear will be set. See ANT Library Config in ant_parameters.h. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_lib_config_clear_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_lib_config_clear command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_lib_config_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint8_t const *const | p_ant_lib_config | ||
) |
Encodes sd_ant_lib_config_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_ant_lib_config | Pointer to ANT library configuration. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_lib_config_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_ant_lib_config | ||
) |
Decodes sd_ant_lib_config_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_ant_lib_config | Pointer to an unsigned char (1 octet) where the ANT lib config bit flags will be set. See ANT Library Config in ant_parameters.h. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_lib_config_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_lib_config_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_network_address_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_network, | ||
uint8_t **const | pp_network_key | ||
) |
Decodes sd_ant_network_address_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_network | Pointer to an unsigned char (1 octet) where the network number to assign the network address to will be set. |
[out] | pp_network_key | Pointer to a pointer to where the network key (8 octets in length) will be set. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_network_address_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_network_address_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_prox_search_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_prox_threshold, | ||
uint8_t *const | p_custom_prox_threshold | ||
) |
Decodes sd_ant_prox_search_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
[out] | p_prox_threshold | Pointer to an unsigned char (1 octet) where the minimum RSSI threshold required for acquisition during a search will be set. See Radio Proximity Search Threshold in ant_parameters.h. |
[out] | p_custom_prox_threshold | Pointer to an unsigned char (1 octet) where the custom minimum RSSI threshold for acquisition during a search will be set. Only applicable if prox_threshold is set to custom proximity selection. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_prox_search_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_prox_search_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_rx_scan_mode_start_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_sync_channel_packets_only | ||
) |
Decodes sd_ant_rx_scan_mode_start command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_sync_channel_packets_only | Pointer to an unsigned char (1 octet) where the synchronous channel only scanning mode will be set. 0 = disable, 1 = enable. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_rx_scan_mode_start_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_rx_scan_mode_start command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_search_channel_priority_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint8_t *const | p_search_priority | ||
) |
Decodes sd_ant_search_channel_priority_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
[out] | p_search_priority | Pointer to an unsigned char (1 octet) where the search priority value will be set. 0 to 7 (Default = 0). |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_search_channel_priority_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_search_channel_priority_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_search_waveform_set_req_dec | ( | uint8_t const *const | p_buf, |
uint32_t | packet_len, | ||
uint8_t *const | p_channel, | ||
uint16_t *const | p_waveform | ||
) |
Decodes sd_ant_search_waveform_set command request.
[in] | p_buf | Pointer to beginning of command request packet. |
[in] | packet_len | Length (in bytes) of response packet. |
[out] | p_channel | Pointer to an unsigned char (1 octet) where the channel number will be set. |
[out] | p_waveform | Pointer to an unsigned short (2 octets) where the channel waveform period (usWaveform/32768 s) will be set. Default = 316. |
NRF_SUCCESS | Decoding success. |
NRF_ERROR_NULL | Decoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Decoding failure. Incorrect buffer length. |
uint32_t ant_search_waveform_set_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_search_waveform_set command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_stack_reset_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len | ||
) |
Encodes sd_ant_stack_reset command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |
uint32_t ant_version_get_rsp_enc | ( | uint32_t | return_code, |
uint8_t *const | p_buf, | ||
uint32_t *const | p_buf_len, | ||
uint8_t const *const | p_version | ||
) |
Encodes sd_ant_version_get command response.
[in] | return_code | Return code indicating if command was successful or not. |
[out] | p_buf | Pointer to buffer where encoded data command response will be returned. |
[in,out] | p_buf_len | in: Size of p_buf buffer. out: Length of encoded command response packet. |
[in] | p_version | Pointer to version. |
NRF_SUCCESS | Encoding success. |
NRF_ERROR_NULL | Encoding failure. NULL pointer supplied. |
NRF_ERROR_INVALID_LENGTH | Encoding failure. Incorrect buffer length. |