%XFSSYNC set command

The set command writes user-modified configuration data to the modem's Non-volatile Memory (NVM) so that the data persists through the power off cycles. When using Production Test Image (PTI) firmware, this command must be used instead of AT+CFUN=0 to store configuration data to NVM.

The command stores to NVM configurations that are set with the following commands:

%XEMPR
%XCOEX0
%XMAGPIO
%XMIPIRFFEDEV
%XMIPIRFFECTRL
%XANTCFG

Syntax:

%XFSSYNC

+CME ERROR code: 518 – Not allowed in active state.

The following command example synchronizes and stores AT command configurations to the modem's NVM:

AT%XFSSYNC
OK

Set command