Set command

The set command reads dynamic Extended Discontinuous Reception (eDRX) parameters.

Syntax:

+CEDRXRDP

Response syntax:

+CEDRXRDP: <AcT-type>[,<Requested_eDRX_value>[,<NW-provided_eDRX_value>[,<Paging_time_window>]]]

The command parameters and their defined values are the following:

<ActT-type>
0 – Current cell not using eDRX
4 – E-UTRAN (WB-S1 mode)
5 – E-UTRAN (NB-S1 mode)
<Requestd_eDRX_value>
String. Half a byte in a four-bit format. The eDRX value refers to bit 4 to 1 of octet 3 of the Extended DRX parameters information element (see 3GPP TS 24.008, subclause 10.5.5.32).
<NW-Provided_eDRX_value>
String. Half a byte in a four-bit format. The eDRX value refers to bit 4 to 1 of octet 3 of the Extended DRX parameters information element (see 3GPP TS 24.008, subclause 10.5.5.32).
<Paging_time_window>
String. Half a byte in a four-bit format. The paging time window referes to bit 8 to 5 of octet 3 of the Extended DRX parameters information element (see 3GPP TS 24.008, subclause 10.5.5.32).

The example command reads eDRX parameters:

AT+CEDRXRDP
+CEDRXRDP: 4,"0011","0010","1001"
OK