v1.0

Deleting configuration

Device configuration and phase control can be deleted from the nRF9160 memory using the %XMIPIRFFEDEV AT command.

The following command syntax is an example of deleting configuration with the %XMIPIRFFEDEV AT command:

AT%XMIPIRFFEDEV=1

The command parameter and its value in the example are the following:

Table 1. Parameters in deleting configuration example
Parameter name Parameter description Value in example Value description
<dev_id> The identification number of the MIPI RF Front-End Control Interface (RFFE) device given when it was introduced using %XMIPIRFFEDEV 1