Revision history

See the following list for an overview of changes from previous versions of this document.

Version Date Change
nRF9160 Revision 2 v1.0 21.09.2020
  • Added: No. 1. “Excessive power consumption after using STOP task”
  • Added: No. 2. “CPU code execution from RAM halted during flash page erase operation”
  • Added: No. 4. “Bits in GPIO LATCH register are incorrectly set to 1”
  • Added: No. 6. “SLEEPENTER and SLEEPEXIT events asserted after pin reset”
  • Added: No. 7. “Subsequent accesses between info_mem and main_mem of the flash may not work properly”
  • Added: No. 9. “Reduced SFDR”
  • Added: No. 15. “Supply regulators default to LDO mode after reset”
  • Added: No. 21. “Disabling instruction cache causes skip of next instruction”
  • Added: No. 23. “TASKS_RESUME impacts UARTE”
  • Added: No. 24. “CPU is not halted for page erase in debug session”
  • Added: No. 26. “System locks up when set in System ON IDLE while waiting for EVENTS_LFCLKSTARTED”
  • Added: No. 28. “Events are not generated when switching from scan mode to no-scan mode”
  • Added: No. 29. “System reset does not work”
  • Added: No. 30. “False SEQEND[0] and SEQEND[1] events are generated”
  • Added: No. 31. “LFXO startup fails”
  • Added: No. 32. “Debug power-up request is not acknowledged”
  • Added: No. 33. “Non-secure code can detect secure events”
Parent topic: nRF9160 Revision 2 Errata