[155] GPIOTE: IN event may occur more than once on input edge

This anomaly applies to Revision 2, build codes CKAA-Dx0, QIAA-Dx0.

It was inherited from the previous IC revision Engineering D.

Symptoms

IN event occurs more than once on an input edge.

Conditions

Input signal edges are closer together than 1.3 µs or >= 750 kHz for a periodic signal.

Consequences

Tasks connected through PPI or SHORTS to this event might be triggered twice.

Workaround

Apply the following code when any GPIOTE channel is configured to generate an IN event on edges that can occur within 1.3 µs of each other: 

*(volatile uint32_t *)(NRF_GPIOTE_BASE + 0x600 + (4 * GPIOTE_CH_USED)) = 1;
Important: A clock is kept on by the workaround and must be reverted to avoid higher current consumption when GPIOTE is not in use, using the following code: 

*(volatile uint32_t *)(NRF_GPIOTE_BASE + 0x600 + (4 * GPIOTE_CH_USED)) = 0;
Parent topic: New and inherited anomalies