QSPI driver instance configuration structure. More...
#include <nrfx_qspi.h>
Data Fields | |
uint32_t | xip_offset |
Address offset into the external memory for Execute in Place operation. | |
nrf_qspi_pins_t | pins |
Pin configuration structure. | |
nrf_qspi_prot_conf_t | prot_if |
Protocol layer interface configuration structure. | |
nrf_qspi_phy_conf_t | phy_if |
Physical layer interface configuration structure. | |
uint32_t | timeout |
Time in milliseconds used in timeout counter. | |
uint8_t | irq_priority |
Interrupt priority. | |
bool | skip_gpio_cfg |
Skip GPIO configuration of pins. | |
bool | skip_psel_cfg |
Skip pin selection configuration. | |
QSPI driver instance configuration structure.
bool nrfx_qspi_config_t::skip_gpio_cfg |
Skip GPIO configuration of pins.
When set to true, the driver does not modify any GPIO parameters of the used pins. Those parameters are supposed to be configured externally before the driver is initialized.
bool nrfx_qspi_config_t::skip_psel_cfg |
Skip pin selection configuration.
When set to true, the driver does not modify pin select registers in the peripheral. Those registers are supposed to be set up externally before the driver is initialized.