nrfx_qspi_config_t Struct Reference

QSPI driver instance configuration structure. More...

#include <nrfx_qspi.h>

Data Fields
uint32_t	xip_offset
	Address offset into the external memory for Execute in Place operation.
nrf_qspi_pins_t	pins
	Pin configuration structure.
nrf_qspi_prot_conf_t	prot_if
	Protocol layer interface configuration structure.
nrf_qspi_phy_conf_t	phy_if
	Physical layer interface configuration structure.
uint8_t	irq_priority
	Interrupt priority.
bool	skip_gpio_cfg
	Skip GPIO configuration of pins. More...
bool	skip_psel_cfg
	Skip pin selection configuration. More...

Detailed Description

QSPI driver instance configuration structure.

Field Documentation

skip_gpio_cfg

bool nrfx_qspi_config_t::skip_gpio_cfg

Skip GPIO configuration of pins.

When set to true, the driver does not modify any GPIO parameters of the used pins. Those parameters are supposed to be configured externally before the driver is initialized.

skip_psel_cfg

bool nrfx_qspi_config_t::skip_psel_cfg

Skip pin selection configuration.

When set to true, the driver does not modify pin select registers in the peripheral. Those registers are supposed to be set up externally before the driver is initialized.

Note

When both GPIO configuration and pin selection are to be skipped, the structure fields that specify pins can be omitted, as they are ignored anyway.

---

The documentation for this struct was generated from the following file:

• drivers/include/nrfx_qspi.h