|
#define | ZB_ZCL_READ_REP_CFG_REQ_SIZE sizeof(zb_zcl_read_reporting_cfg_req_t) |
| Minimal size of Write attribute request, it will be more if attr_value size is more than 1 byte.
|
|
#define | ZB_ZCL_GENERAL_GET_NEXT_READ_REP_CFG_REQ(data_buf, rep_cfg_req, rslt) |
| Parses read reporting configuration request and returns next Read reporting configuration attribute record or NULL if there is no more data. More...
|
|
#define | ZB_ZCL_GENERAL_INIT_READ_REPORTING_CONFIGURATION_SRV_REQ(buffer, ptr, def_resp) |
| Initialize Read reporting configuration command (report send case) More...
|
|
#define | ZB_ZCL_GENERAL_INIT_READ_REPORTING_CONFIGURATION_CLI_REQ(buffer, ptr, def_resp) |
| Initialize Read reporting configuration command (report receive case) More...
|
|
#define | ZB_ZCL_GENERAL_ADD_SEND_READ_REPORTING_CONFIGURATION_REQ(ptr, attr_id) |
| Add Read reporting configuration record to command payload (report send case) More...
|
|
#define | ZB_ZCL_GENERAL_ADD_RECV_READ_REPORTING_CONFIGURATION_REQ(ptr, attr_id) |
| Add Read reporting configuration record to command payload (report receive case) More...
|
|
#define | ZB_ZCL_GENERAL_SEND_READ_REPORTING_CONFIGURATION_REQ(buffer, ptr, addr, dst_addr_mode, dst_ep, ep, prfl_id, cluster_id, cb) |
| Sends Read reporting configuration command. More...
|
|
#define | ZB_ZCL_GENERAL_GET_READ_REPORTING_CONFIGURATION_RES(data_buf, read_rep_conf_res) |
| Parses Read reporting configuration response and returns next read reporting configuration record or NULL if there is no more data. More...
|
|
Most of actions related to the read attribute reporting configuration are implemented in ZCL internals. Read reportung configuration command is described in ZCL spec, subclause 2.4.9.
#define ZB_ZCL_GENERAL_ADD_RECV_READ_REPORTING_CONFIGURATION_REQ |
( |
|
ptr, |
|
|
|
attr_id |
|
) |
| |
Value:
}
#define ZB_ZCL_PACKET_PUT_DATA8(ptr, val)
Put 8 bit value to packet.
Definition: zb_zcl_common.h:1271
#define ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, val)
Definition: zb_zcl_common.h:1289
Definition: zb_zcl_commands.h:1349
Add Read reporting configuration record to command payload (report receive case)
- Parameters
-
ptr | - command buffer pointer |
attr_id | - attribute identifier |
#define ZB_ZCL_GENERAL_ADD_SEND_READ_REPORTING_CONFIGURATION_REQ |
( |
|
ptr, |
|
|
|
attr_id |
|
) |
| |
Value:
}
#define ZB_ZCL_PACKET_PUT_DATA8(ptr, val)
Put 8 bit value to packet.
Definition: zb_zcl_common.h:1271
Definition: zb_zcl_commands.h:1348
#define ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, val)
Definition: zb_zcl_common.h:1289
Add Read reporting configuration record to command payload (report send case)
- Parameters
-
ptr | - command buffer pointer |
attr_id | - attribute identifier |
#define ZB_ZCL_GENERAL_GET_NEXT_READ_REP_CFG_REQ |
( |
|
data_buf, |
|
|
|
rep_cfg_req, |
|
|
|
rslt |
|
) |
| |
Value:
if (cfg_req) \
{ \
rep_cfg_req.direction = cfg_req -> direction; \
rep_cfg_req.attr_id = cfg_req -> attr_id; \
ZB_ZCL_HTOLE16_INPLACE(&(read_rep_cfg_req).attr_id); \
} \
else \
{ \
} \
}
#define ZB_BUF_BEGIN(zbbuf)
Definition: zboss_api_core.h:758
#define ZB_BUF_LEN(zbbuf)
Definition: zboss_api_core.h:767
#define ZB_ZCL_READ_REP_CFG_REQ_SIZE
Minimal size of Write attribute request, it will be more if attr_value size is more than 1 byte...
Definition: zb_zcl_commands.h:1677
struct zb_zcl_read_reporting_cfg_req_s zb_zcl_read_reporting_cfg_req_t
Definition: zb_types.h:101
Definition: zb_zcl_commands.h:1661
Definition: zb_types.h:100
Parses read reporting configuration request and returns next Read reporting configuration attribute record or NULL if there is no more data.
If request contains invlid data, NULL is returned.
- Parameters
-
data_buf | - pointer to zb_buf_t buffer containing read reporting configuration request data |
rep_cfg_req | - out pointer to zb_zcl_read_attr_req_t, containing read reporting configuration request |
rslt | - returns TRUE if record exist and FALSE if not |
- Note
- data_buf buffer should contain read reporting configuration request payload, without ZCL header. Each parsed read reporting configuration request is exctracted from intial data_buf buffer
#define ZB_ZCL_GENERAL_GET_READ_REPORTING_CONFIGURATION_RES |
( |
|
data_buf, |
|
|
|
read_rep_conf_res |
|
) |
| |
Parses Read reporting configuration response and returns next read reporting configuration record or NULL if there is no more data.
If response contains invlid data, NULL is returned.
- Parameters
-
data_buf | - pointer to zb_buf_t buffer containing Configure reporting response data |
read_rep_conf_res | - out pointer to zb_zcl_read_reporting_cfg_rsp_t, containing read reporting configuration record |
- Note
- data_buf buffer should contain Read reporting configuration, without ZCL header. Each parsed Read reporting configuration record is exctracted from intial data_buf buffer
#define ZB_ZCL_GENERAL_INIT_READ_REPORTING_CONFIGURATION_CLI_REQ |
( |
|
buffer, |
|
|
|
ptr, |
|
|
|
def_resp |
|
) |
| |
Value:{ \
ZB_ZCL_CONSTRUCT_GENERAL_COMMAND_REQ_FRAME_CONTROL_A( \
}
#define ZB_ZCL_GET_SEQ_NUM()
Return next sequence number for ZCL frame.
Definition: zb_zcl_common.h:1168
Definition: zb_zcl_common.h:792
#define ZB_ZCL_START_PACKET(zbbuf)
Initializes zb_buf_t buffer and returns pointer to the beginning of array.
Definition: zb_zcl_common.h:1250
Standard profile command.
Definition: zb_zcl_common.h:762
#define ZB_ZCL_CONSTRUCT_COMMAND_HEADER(data_ptr, tsn, cmd_id)
Construct ZCL header.
Definition: zb_zcl_common.h:1125
Definition: zb_zcl_commands.h:86
Initialize Read reporting configuration command (report receive case)
- Parameters
-
buffer | to put packet to |
ptr | - command buffer pointer |
def_resp | - enable/disable default response |
#define ZB_ZCL_GENERAL_INIT_READ_REPORTING_CONFIGURATION_SRV_REQ |
( |
|
buffer, |
|
|
|
ptr, |
|
|
|
def_resp |
|
) |
| |
Value:{ \
ZB_ZCL_CONSTRUCT_GENERAL_COMMAND_REQ_FRAME_CONTROL_A( \
}
#define ZB_ZCL_GET_SEQ_NUM()
Return next sequence number for ZCL frame.
Definition: zb_zcl_common.h:1168
#define ZB_ZCL_START_PACKET(zbbuf)
Initializes zb_buf_t buffer and returns pointer to the beginning of array.
Definition: zb_zcl_common.h:1250
Standard profile command.
Definition: zb_zcl_common.h:762
Definition: zb_zcl_common.h:790
#define ZB_ZCL_CONSTRUCT_COMMAND_HEADER(data_ptr, tsn, cmd_id)
Construct ZCL header.
Definition: zb_zcl_common.h:1125
Definition: zb_zcl_commands.h:86
Initialize Read reporting configuration command (report send case)
- Parameters
-
buffer | to put packet to |
ptr | - command buffer pointer |
def_resp | - enable/disable default response |
#define ZB_ZCL_GENERAL_SEND_READ_REPORTING_CONFIGURATION_REQ |
( |
|
buffer, |
|
|
|
ptr, |
|
|
|
addr, |
|
|
|
dst_addr_mode, |
|
|
|
dst_ep, |
|
|
|
ep, |
|
|
|
prfl_id, |
|
|
|
cluster_id, |
|
|
|
cb |
|
) |
| |
Value:
ZB_ZCL_SEND_COMMAND_SHORT(buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, cluster_id, cb); \
}
#define ZB_ZCL_FINISH_PACKET(zbbuf, ptr)
Definition: zb_zcl_common.h:1572
Sends Read reporting configuration command.
- Parameters
-
buffer | to put data to |
ptr | - pointer to the memory area to put data to |
addr | - address to send packet to |
dst_addr_mode | - addressing mode |
dst_ep | - destination endpoint |
ep | - sending endpoint |
prfl_id | - profile identifier |
cluster_id | - cluster identifier |
cb | - callback for getting command send status |
Format of the Attribute Status Record Field Figure 2.20 in ZCL spec. NOTE: it can be variouse number of attribute status record fields in Read reporting configuration request
Format of the Attribute Reporting Configuration Record Field Figure 2.22 in ZCL spec. NOTE: it can be variouse number of attribute recording configuration record fields in Read reporting configuration responce