SPI master driver instance configuration structure. More...
#include <nrf_drv_spi.h>
Data Fields | |
| uint8_t | sck_pin |
| SCK pin number. | |
| uint8_t | mosi_pin |
| MOSI pin number (optional). More... | |
| uint8_t | miso_pin |
| MISO pin number (optional). More... | |
| uint8_t | ss_pin |
| Slave Select pin number (optional). More... | |
| uint8_t | irq_priority |
| Interrupt priority. | |
| uint8_t | orc |
| Over-run character. More... | |
| nrf_drv_spi_frequency_t | frequency |
| SPI frequency. | |
| nrf_drv_spi_mode_t | mode |
| SPI mode. | |
| nrf_drv_spi_bit_order_t | bit_order |
| SPI bit order. | |
SPI master driver instance configuration structure.
| uint8_t nrf_drv_spi_config_t::miso_pin |
MISO pin number (optional).
Set NRF_DRV_SPI_PIN_NOT_USED if this signal is not needed.
| uint8_t nrf_drv_spi_config_t::mosi_pin |
MOSI pin number (optional).
Set NRF_DRV_SPI_PIN_NOT_USED if this signal is not needed.
| uint8_t nrf_drv_spi_config_t::orc |
Over-run character.
This character is used when all bytes from the TX buffer are sent, but the transfer continues due to RX.
| uint8_t nrf_drv_spi_config_t::ss_pin |
Slave Select pin number (optional).
Set NRF_DRV_SPI_PIN_NOT_USED if this signal is not needed.