Module to declare Common PHY API. More...
Macros | |
#define | PHY_MAX_PACKET_SIZE 127 |
The maximum PSDU size (in octets) the PHY shall be able to receive (aMaxPHYPacketSize). More... | |
#define | PHY_MAX_HEADER_SIZE 1 |
The maximum PHR size (in octets). More... | |
#define | PHY_MAX_PPDU_SIZE (PHY_MAX_HEADER_SIZE + PHY_MAX_PACKET_SIZE) |
Maximum PPDU size. | |
#define | PHY_HEADER_POS (-1) |
Position of PHY header related to income PPDU start pointer. | |
#define | PHY_HEADER_SIZE 1 |
Size of PHY header in bytes. | |
#define | PHY_MAX_CHANNEL_NUM 0x1Au |
Maximum channel number. | |
#define | PHY_MIN_CHANNEL_NUM 0x0Bu |
Minimum channel number. | |
#define | aMaxPHYPacketSize PHY_MAX_PACKET_SIZE |
#define | aTurnaroundTime 12 |
#define | aTurnaroundTimeUs 192 |
#define | PHY_CURRENT_PAGE 0x0u |
#define | PHY_CHANNEL_SUPPORTED 0x07FFF800ul |
#define | PHY_SHR_DURATION 10u |
#define | PHY_MAX_FRAME_DURATION (PHY_SHR_DURATION + (int)((aMaxPHYPacketSize + 1) * PHY_SYMBOLS_PER_OCTET)) |
#define | PHY_SYMBOLS_PER_OCTET 2u |
#define | PHY_TRX_CCA_MODE0 0 |
#define | PHY_TRX_CCA_MODE1 1 |
#define | PHY_TRX_CCA_MODE2 2 |
#define | PHY_TRX_CCA_MODE3 3 |
#define | PHY_MIN_TX_POWER 0x20 |
Minimum value that can be used to set radio transmit power. Equals to -32 dBm. More... | |
#define | PHY_TRANSMIT_POWER_SIGN_BIT_POS 5 |
Internal parameter of the PHY layer. More... | |
#define | PHY_TRANSMIT_POWER_MASK 0xC0 |
Internal parameter of the PHY layer. More... | |
#define | PHY_TRANSMIT_POWER_MASK_INV 0x3F |
Internal parameter of the PHY layer. More... | |
#define | DBM_11 ( 11 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_10 ( 10 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_9 ( 9 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_8 ( 8 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_7 ( 7 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_6 ( 6 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_5 ( 5 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_4 ( 4 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_3 ( 3 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_2 ( 2 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_1 ( 1 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_0 ( 0 & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_1 (( -1) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_2 (( -2) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_3 (( -3) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_4 (( -4) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_5 (( -5) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_6 (( -6) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_7 (( -7) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_8 (( -8) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_9 (( -9) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_10 ((-10) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_11 ((-11) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_12 ((-12) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_13 ((-13) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_14 ((-14) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_15 ((-15) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_16 ((-16) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_17 ((-17) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_18 ((-18) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_19 ((-19) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_20 ((-20) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_21 ((-21) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_22 ((-22) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_23 ((-23) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_24 ((-24) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_25 ((-25) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_26 ((-26) & PHY_TRANSMIT_POWER_MASK_INV) |
#define | DBM_MIN_27 ((-27) & PHY_TRANSMIT_POWER_MASK_INV) |
Typedefs | |
typedef phy_enum_t | phy_status_t |
PHY status type. | |
Enumerations | |
enum | phy_enum_t { PHY_BUSY = 0x00, PHY_BUSY_RX = 0x01, PHY_BUSY_TX = 0x02, PHY_FORCE_TRX_OFF = 0x03, PHY_IDLE = 0x04, PHY_INVALID_PARAMETER = 0x05, PHY_RX_ON = 0x06, PHY_SUCCESS = 0x07, PHY_TRX_OFF = 0x08, PHY_TX_ON = 0x09, PHY_UNSUPPORTED_ATTRIBUTE = 0x0A, PHY_READ_ONLY = 0x0B, PHY_FORCE_TX_ON = 0xFC, PHY_CHANNEL_ACCESS_FAILURE = 0xFD, PHY_NO_ACK = 0xFE, PHY_IS_NOT_AVAILABLE = 0xFF } |
Common PHY enumerations description used in various PHY primitives. More... | |
Module to declare Common PHY API.
The Common PHY module contains declarations of commonly used PHY routines and necessary macros/types.
#define PHY_MAX_HEADER_SIZE 1 |
The maximum PHR size (in octets).
See 6.3 PPDU format.
#define PHY_MAX_PACKET_SIZE 127 |
The maximum PSDU size (in octets) the PHY shall be able to receive (aMaxPHYPacketSize).
See Table 22 - PHY constants.
#define PHY_MIN_TX_POWER 0x20 |
Minimum value that can be used to set radio transmit power. Equals to -32 dBm.
This is a combination of digits which includes: 2 MSBs represent the tolerance on the transmit power 6 LSBs which may be written to, represent a signed integer in twos-complement format, corresponding to the nominal transmit power of the device in decibels relative to 1 mW. All combinations less than 0xBF are valid.
#define PHY_TRANSMIT_POWER_MASK 0xC0 |
Internal parameter of the PHY layer.
This mask hides transmit power from transmit power attribute value, but leaves precision bitfield.
#define PHY_TRANSMIT_POWER_MASK_INV 0x3F |
Internal parameter of the PHY layer.
This mask hides precision bitfield from transmit power attribute value, leaving transmit power unchanged.
#define PHY_TRANSMIT_POWER_SIGN_BIT_POS 5 |
Internal parameter of the PHY layer.
Position of the sign bit inside transmit power attribute.
enum phy_enum_t |
Common PHY enumerations description used in various PHY primitives.
See Table 18-PHY enumerations description for detailed info on the statuses up to PHY_READ_ONLY. The statuses with higher numbers are implementation specific and used for synchronous API only.