This file contains macros that should be implemented according to the needs of the host environment into which nrfx is integrated.
More...
|
#define | NRFX_ASSERT(expression) ASSERT(expression) |
| Macro for placing a runtime assertion. More...
|
|
#define | NRFX_STATIC_ASSERT(expression) STATIC_ASSERT(expression) |
| Macro for placing a compile time assertion. More...
|
|
#define | INTERRUPT_PRIORITY_IS_VALID(pri) |
|
#define | NRFX_IRQ_PRIORITY_SET(irq_number, priority) _NRFX_IRQ_PRIORITY_SET(irq_number, priority) |
| Macro for setting the priority of a specific IRQ. More...
|
|
#define | NRFX_IRQ_ENABLE(irq_number) _NRFX_IRQ_ENABLE(irq_number) |
| Macro for enabling a specific IRQ. More...
|
|
#define | NRFX_IRQ_IS_ENABLED(irq_number) _NRFX_IRQ_IS_ENABLED(irq_number) |
| Macro for checking if a specific IRQ is enabled. More...
|
|
#define | NRFX_IRQ_DISABLE(irq_number) _NRFX_IRQ_DISABLE(irq_number) |
| Macro for disabling a specific IRQ. More...
|
|
#define | NRFX_IRQ_PENDING_SET(irq_number) _NRFX_IRQ_PENDING_SET(irq_number) |
| Macro for setting a specific IRQ as pending. More...
|
|
#define | NRFX_IRQ_PENDING_CLEAR(irq_number) _NRFX_IRQ_PENDING_CLEAR(irq_number) |
| Macro for clearing the pending status of a specific IRQ. More...
|
|
#define | NRFX_IRQ_IS_PENDING(irq_number) _NRFX_IRQ_IS_PENDING(irq_number) |
| Macro for checking the pending status of a specific IRQ. More...
|
|
#define | NRFX_CRITICAL_SECTION_ENTER() CRITICAL_REGION_ENTER() |
| Macro for entering into a critical section.
|
|
#define | NRFX_CRITICAL_SECTION_EXIT() CRITICAL_REGION_EXIT() |
| Macro for exiting from a critical section.
|
|
#define | NRFX_DELAY_DWT_BASED 0 |
| When set to a non-zero value, this macro specifies that nrfx_coredep_delay_us uses a precise DWT-based solution. A compilation error is generated if the DWT unit is not present in the SoC used.
|
|
#define | NRFX_DELAY_US(us_time) nrfx_coredep_delay_us(us_time) |
|
#define | nrfx_atomic_t nrfx_atomic_u32_t |
| Atomic 32 bit unsigned type.
|
|
#define | NRFX_ATOMIC_FETCH_STORE(p_data, value) nrfx_atomic_u32_fetch_store(p_data, value) |
| Stores value to an atomic object and returns previously stored value. More...
|
|
#define | NRFX_ATOMIC_FETCH_OR(p_data, value) nrfx_atomic_u32_fetch_or(p_data, value) |
| Performs logical OR operation on an atomic object and returns previously stored value. More...
|
|
#define | NRFX_ATOMIC_FETCH_AND(p_data, value) nrfx_atomic_u32_fetch_and(p_data, value) |
| Performs logical AND operation on an atomic object and returns previously stored value. More...
|
|
#define | NRFX_ATOMIC_FETCH_XOR(p_data, value) nrfx_atomic_u32_fetch_xor(p_data, value) |
| Performs logical XOR operation on an atomic object and returns previously stored value. More...
|
|
#define | NRFX_ATOMIC_FETCH_ADD(p_data, value) nrfx_atomic_u32_fetch_add(p_data, value) |
| Performs logical ADD operation on an atomic object and returns previously stored value. More...
|
|
#define | NRFX_ATOMIC_FETCH_SUB(p_data, value) nrfx_atomic_u32_fetch_sub(p_data, value) |
| Performs logical SUB operation on an atomic object and returns previously stored value. More...
|
|
#define | NRFX_CUSTOM_ERROR_CODES 1 |
| When set to a non-zero value, this macro specifies that the Global Error Codes and the ret_code_t type itself are defined in a customized way and the default definitions from <nrfx_error.h> should not be used.
|
|
#define | NRFX_SUCCESS NRF_SUCCESS |
|
#define | NRFX_ERROR_INTERNAL NRF_ERROR_INTERNAL |
|
#define | NRFX_ERROR_NO_MEM NRF_ERROR_NO_MEM |
|
#define | NRFX_ERROR_NOT_SUPPORTED NRF_ERROR_NOT_SUPPORTED |
|
#define | NRFX_ERROR_INVALID_PARAM NRF_ERROR_INVALID_PARAM |
|
#define | NRFX_ERROR_INVALID_STATE NRF_ERROR_INVALID_STATE |
|
#define | NRFX_ERROR_INVALID_LENGTH NRF_ERROR_INVALID_LENGTH |
|
#define | NRFX_ERROR_TIMEOUT NRF_ERROR_TIMEOUT |
|
#define | NRFX_ERROR_FORBIDDEN NRF_ERROR_FORBIDDEN |
|
#define | NRFX_ERROR_NULL NRF_ERROR_NULL |
|
#define | NRFX_ERROR_INVALID_ADDR NRF_ERROR_INVALID_ADDR |
|
#define | NRFX_ERROR_BUSY NRF_ERROR_BUSY |
|
#define | NRFX_ERROR_ALREADY_INITIALIZED NRF_ERROR_MODULE_ALREADY_INITIALIZED |
|
#define | NRFX_ERROR_DRV_TWI_ERR_OVERRUN NRF_ERROR_DRV_TWI_ERR_OVERRUN |
|
#define | NRFX_ERROR_DRV_TWI_ERR_ANACK NRF_ERROR_DRV_TWI_ERR_ANACK |
|
#define | NRFX_ERROR_DRV_TWI_ERR_DNACK NRF_ERROR_DRV_TWI_ERR_DNACK |
|
#define | NRFX_PPI_CHANNELS_USED NRF_PPI_CHANNELS_USED |
| Bitmask defining PPI channels reserved to be used outside of nrfx.
|
|
#define | NRFX_PPI_GROUPS_USED NRF_PPI_GROUPS_USED |
| Bitmask defining PPI groups reserved to be used outside of nrfx.
|
|
#define | NRFX_SWI_USED NRF_SWI_USED |
| Bitmask defining SWI instances reserved to be used outside of nrfx.
|
|
#define | NRFX_TIMERS_USED NRF_TIMERS_USED |
| Bitmask defining TIMER instances reserved to be used outside of nrfx.
|
|
This file contains macros that should be implemented according to the needs of the host environment into which nrfx is integrated.