Macros | |
#define | NRF_BLE_SCAN_ENABLED |
Enabling the Scanning Module. More... | |
#define | NRF_BLE_SCAN_BUFFER |
Data length for an advertising set. More... | |
#define | NRF_BLE_SCAN_NAME_MAX_LEN |
Maximum size for the name to search in the advertisement report. More... | |
#define | NRF_BLE_SCAN_SHORT_NAME_MAX_LEN |
Maximum size of the short name to search for in the advertisement report. More... | |
#define | NRF_BLE_SCAN_SCAN_INTERVAL |
Scanning interval. Determines the scan interval in units of 0.625 millisecond. More... | |
#define | NRF_BLE_SCAN_SCAN_DURATION |
Duration of a scanning session in units of 10 ms. Range: 0x0001 - 0xFFFF (10 ms to 10.9225 ms). If set to 0x0000, the scanning continues until it is explicitly disabled. More... | |
#define | NRF_BLE_SCAN_SCAN_WINDOW |
Scanning window. Determines the scanning window in units of 0.625 millisecond. More... | |
#define | NRF_BLE_SCAN_MIN_CONNECTION_INTERVAL |
Determines minimum connection interval in milliseconds. More... | |
#define | NRF_BLE_SCAN_MAX_CONNECTION_INTERVAL |
Determines maximum connection interval in milliseconds. More... | |
#define | NRF_BLE_SCAN_SLAVE_LATENCY |
Determines the slave latency in counts of connection events. More... | |
#define | NRF_BLE_SCAN_SUPERVISION_TIMEOUT |
Determines the supervision time-out in units of 10 millisecond. More... | |
#define | NRF_BLE_SCAN_SCAN_PHY |
PHY to scan on. More... | |
#define | NRF_BLE_SCAN_FILTER_ENABLE |
Enabling filters for the Scanning Module. More... | |
#define | NRF_BLE_SCAN_UUID_CNT |
Number of filters for UUIDs. More... | |
#define | NRF_BLE_SCAN_NAME_CNT |
Number of name filters. More... | |
#define | NRF_BLE_SCAN_SHORT_NAME_CNT |
Number of short name filters. More... | |
#define | NRF_BLE_SCAN_ADDRESS_CNT |
Number of address filters. More... | |
#define | NRF_BLE_SCAN_APPEARANCE_CNT |
Number of appearance filters. More... | |
#define NRF_BLE_SCAN_ADDRESS_CNT |
Number of address filters.
#define NRF_BLE_SCAN_APPEARANCE_CNT |
Number of appearance filters.
#define NRF_BLE_SCAN_BUFFER |
Data length for an advertising set.
#define NRF_BLE_SCAN_ENABLED |
Enabling the Scanning Module.
Set to 1 to activate.
#define NRF_BLE_SCAN_FILTER_ENABLE |
Enabling filters for the Scanning Module.
Set to 1 to activate.
#define NRF_BLE_SCAN_MAX_CONNECTION_INTERVAL |
Determines maximum connection interval in milliseconds.
#define NRF_BLE_SCAN_MIN_CONNECTION_INTERVAL |
Determines minimum connection interval in milliseconds.
#define NRF_BLE_SCAN_NAME_CNT |
Number of name filters.
#define NRF_BLE_SCAN_NAME_MAX_LEN |
Maximum size for the name to search in the advertisement report.
#define NRF_BLE_SCAN_SCAN_DURATION |
Duration of a scanning session in units of 10 ms. Range: 0x0001 - 0xFFFF (10 ms to 10.9225 ms). If set to 0x0000, the scanning continues until it is explicitly disabled.
#define NRF_BLE_SCAN_SCAN_INTERVAL |
Scanning interval. Determines the scan interval in units of 0.625 millisecond.
#define NRF_BLE_SCAN_SCAN_PHY |
PHY to scan on.
Following options are available:
#define NRF_BLE_SCAN_SCAN_WINDOW |
Scanning window. Determines the scanning window in units of 0.625 millisecond.
#define NRF_BLE_SCAN_SHORT_NAME_CNT |
Number of short name filters.
#define NRF_BLE_SCAN_SHORT_NAME_MAX_LEN |
Maximum size of the short name to search for in the advertisement report.
#define NRF_BLE_SCAN_SLAVE_LATENCY |
Determines the slave latency in counts of connection events.
#define NRF_BLE_SCAN_SUPERVISION_TIMEOUT |
Determines the supervision time-out in units of 10 millisecond.
#define NRF_BLE_SCAN_UUID_CNT |
Number of filters for UUIDs.