Hardware access layer for managing the UART peripheral. More...

Macros
#define	NRF_UART_PSEL_DISCONNECTED 0xFFFFFFFF

Enumerations
enum	nrf_uart_task_t { NRF_UART_TASK_STARTRX = offsetof(NRF_UART_Type, TASKS_STARTRX), NRF_UART_TASK_STOPRX = offsetof(NRF_UART_Type, TASKS_STOPRX), NRF_UART_TASK_STARTTX = offsetof(NRF_UART_Type, TASKS_STARTTX), NRF_UART_TASK_STOPTX = offsetof(NRF_UART_Type, TASKS_STOPTX), NRF_UART_TASK_SUSPEND = offsetof(NRF_UART_Type, TASKS_SUSPEND) }
	UART tasks. More...

enum	nrf_uart_event_t { NRF_UART_EVENT_CTS = offsetof(NRF_UART_Type, EVENTS_CTS), NRF_UART_EVENT_NCTS = offsetof(NRF_UART_Type, EVENTS_NCTS), NRF_UART_EVENT_RXDRDY = offsetof(NRF_UART_Type, EVENTS_RXDRDY), NRF_UART_EVENT_TXDRDY = offsetof(NRF_UART_Type, EVENTS_TXDRDY), NRF_UART_EVENT_ERROR = offsetof(NRF_UART_Type, EVENTS_ERROR), NRF_UART_EVENT_RXTO = offsetof(NRF_UART_Type, EVENTS_RXTO) }
	UART events. More...

enum	nrf_uart_int_mask_t { NRF_UART_INT_MASK_CTS = UART_INTENCLR_CTS_Msk, NRF_UART_INT_MASK_NCTS = UART_INTENCLR_NCTS_Msk, NRF_UART_INT_MASK_RXDRDY = UART_INTENCLR_RXDRDY_Msk, NRF_UART_INT_MASK_TXDRDY = UART_INTENCLR_TXDRDY_Msk, NRF_UART_INT_MASK_ERROR = UART_INTENCLR_ERROR_Msk, NRF_UART_INT_MASK_RXTO = UART_INTENCLR_RXTO_Msk }
	UART interrupts. More...

enum	nrf_uart_baudrate_t { NRF_UART_BAUDRATE_1200 = UART_BAUDRATE_BAUDRATE_Baud1200, NRF_UART_BAUDRATE_2400 = UART_BAUDRATE_BAUDRATE_Baud2400, NRF_UART_BAUDRATE_4800 = UART_BAUDRATE_BAUDRATE_Baud4800, NRF_UART_BAUDRATE_9600 = UART_BAUDRATE_BAUDRATE_Baud9600, NRF_UART_BAUDRATE_14400 = UART_BAUDRATE_BAUDRATE_Baud14400, NRF_UART_BAUDRATE_19200 = UART_BAUDRATE_BAUDRATE_Baud19200, NRF_UART_BAUDRATE_28800 = UART_BAUDRATE_BAUDRATE_Baud28800, NRF_UART_BAUDRATE_31250 = UART_BAUDRATE_BAUDRATE_Baud31250, NRF_UART_BAUDRATE_38400 = UART_BAUDRATE_BAUDRATE_Baud38400, NRF_UART_BAUDRATE_56000 = UART_BAUDRATE_BAUDRATE_Baud56000, NRF_UART_BAUDRATE_57600 = UART_BAUDRATE_BAUDRATE_Baud57600, NRF_UART_BAUDRATE_76800 = UART_BAUDRATE_BAUDRATE_Baud76800, NRF_UART_BAUDRATE_115200 = UART_BAUDRATE_BAUDRATE_Baud115200, NRF_UART_BAUDRATE_230400 = UART_BAUDRATE_BAUDRATE_Baud230400, NRF_UART_BAUDRATE_250000 = UART_BAUDRATE_BAUDRATE_Baud250000, NRF_UART_BAUDRATE_460800 = UART_BAUDRATE_BAUDRATE_Baud460800, NRF_UART_BAUDRATE_921600 = UART_BAUDRATE_BAUDRATE_Baud921600, NRF_UART_BAUDRATE_1000000 = UART_BAUDRATE_BAUDRATE_Baud1M }
	Baudrates supported by UART. More...

enum	nrf_uart_error_mask_t { NRF_UART_ERROR_OVERRUN_MASK = UART_ERRORSRC_OVERRUN_Msk, NRF_UART_ERROR_PARITY_MASK = UART_ERRORSRC_PARITY_Msk, NRF_UART_ERROR_FRAMING_MASK = UART_ERRORSRC_FRAMING_Msk, NRF_UART_ERROR_BREAK_MASK = UART_ERRORSRC_BREAK_Msk }
	Types of UART error masks. More...

enum	nrf_uart_parity_t { NRF_UART_PARITY_EXCLUDED = UART_CONFIG_PARITY_Excluded << UART_CONFIG_PARITY_Pos, NRF_UART_PARITY_INCLUDED = UART_CONFIG_PARITY_Included << UART_CONFIG_PARITY_Pos }
	Types of UART parity modes. More...

enum	nrf_uart_hwfc_t { NRF_UART_HWFC_DISABLED = UART_CONFIG_HWFC_Disabled, NRF_UART_HWFC_ENABLED = UART_CONFIG_HWFC_Enabled }
	Types of UART flow control modes. More...

Functions
__STATIC_INLINE void	nrf_uart_event_clear (NRF_UART_Type *p_reg, nrf_uart_event_t event)
	Function for clearing a specific UART event. More...

__STATIC_INLINE bool	nrf_uart_event_check (NRF_UART_Type *p_reg, nrf_uart_event_t event)
	Function for checking the state of a specific UART event. More...

__STATIC_INLINE uint32_t	nrf_uart_event_address_get (NRF_UART_Type *p_reg, nrf_uart_event_t event)
	Function for returning the address of a specific UART event register. More...

__STATIC_INLINE void	nrf_uart_int_enable (NRF_UART_Type *p_reg, uint32_t int_mask)
	Function for enabling a specific interrupt. More...

__STATIC_INLINE bool	nrf_uart_int_enable_check (NRF_UART_Type *p_reg, uint32_t int_mask)
	Function for retrieving the state of a given interrupt. More...

__STATIC_INLINE void	nrf_uart_int_disable (NRF_UART_Type *p_reg, uint32_t int_mask)
	Function for disabling specific interrupts. More...

__STATIC_INLINE uint32_t	nrf_uart_errorsrc_get_and_clear (NRF_UART_Type *p_reg)
	Function for getting error source mask. Function is clearing error source flags after reading. More...

__STATIC_INLINE void	nrf_uart_enable (NRF_UART_Type *p_reg)
	Function for enabling UART. More...

__STATIC_INLINE void	nrf_uart_disable (NRF_UART_Type *p_reg)
	Function for disabling UART. More...

__STATIC_INLINE void	nrf_uart_txrx_pins_set (NRF_UART_Type *p_reg, uint32_t pseltxd, uint32_t pselrxd)
	Function for configuring TX/RX pins. More...

__STATIC_INLINE void	nrf_uart_txrx_pins_disconnect (NRF_UART_Type *p_reg)
	Function for disconnecting TX/RX pins. More...

__STATIC_INLINE uint32_t	nrf_uart_tx_pin_get (NRF_UART_Type *p_reg)
	Function for getting TX pin. More...

__STATIC_INLINE uint32_t	nrf_uart_rx_pin_get (NRF_UART_Type *p_reg)
	Function for getting RX pin. More...

__STATIC_INLINE uint32_t	nrf_uart_rts_pin_get (NRF_UART_Type *p_reg)
	Function for getting RTS pin. More...

__STATIC_INLINE uint32_t	nrf_uart_cts_pin_get (NRF_UART_Type *p_reg)
	Function for getting CTS pin. More...

__STATIC_INLINE void	nrf_uart_hwfc_pins_set (NRF_UART_Type *p_reg, uint32_t pselrts, uint32_t pselcts)
	Function for configuring flow control pins. More...

__STATIC_INLINE void	nrf_uart_hwfc_pins_disconnect (NRF_UART_Type *p_reg)
	Function for disconnecting flow control pins. More...

__STATIC_INLINE uint8_t	nrf_uart_rxd_get (NRF_UART_Type *p_reg)
	Function for reading RX data. More...

__STATIC_INLINE void	nrf_uart_txd_set (NRF_UART_Type *p_reg, uint8_t txd)
	Function for setting Tx data. More...

__STATIC_INLINE void	nrf_uart_task_trigger (NRF_UART_Type *p_reg, nrf_uart_task_t task)
	Function for starting an UART task. More...

__STATIC_INLINE uint32_t	nrf_uart_task_address_get (NRF_UART_Type *p_reg, nrf_uart_task_t task)
	Function for returning the address of a specific task register. More...

__STATIC_INLINE void	nrf_uart_configure (NRF_UART_Type *p_reg, nrf_uart_parity_t parity, nrf_uart_hwfc_t hwfc)
	Function for configuring UART. More...

__STATIC_INLINE void	nrf_uart_baudrate_set (NRF_UART_Type *p_reg, nrf_uart_baudrate_t baudrate)
	Function for setting UART baudrate. More...

Detailed Description

Hardware access layer for managing the UART peripheral.

Enumeration Type Documentation

enum nrf_uart_baudrate_t

Baudrates supported by UART.

Enumerator
NRF_UART_BAUDRATE_1200	1200 baud.
NRF_UART_BAUDRATE_2400	2400 baud.
NRF_UART_BAUDRATE_4800	4800 baud.
NRF_UART_BAUDRATE_9600	9600 baud.
NRF_UART_BAUDRATE_14400	14400 baud.
NRF_UART_BAUDRATE_19200	19200 baud.
NRF_UART_BAUDRATE_28800	28800 baud.
NRF_UART_BAUDRATE_31250	31250 baud.
NRF_UART_BAUDRATE_38400	38400 baud.
NRF_UART_BAUDRATE_56000	56000 baud.
NRF_UART_BAUDRATE_57600	57600 baud.
NRF_UART_BAUDRATE_76800	76800 baud.
NRF_UART_BAUDRATE_115200	115200 baud.
NRF_UART_BAUDRATE_230400	230400 baud.
NRF_UART_BAUDRATE_250000	250000 baud.
NRF_UART_BAUDRATE_460800	460800 baud.
NRF_UART_BAUDRATE_921600	921600 baud.
NRF_UART_BAUDRATE_1000000	1000000 baud.

enum nrf_uart_error_mask_t

Types of UART error masks.

Enumerator
NRF_UART_ERROR_OVERRUN_MASK	Overrun error.
NRF_UART_ERROR_PARITY_MASK	Parity error.
NRF_UART_ERROR_FRAMING_MASK	Framing error.
NRF_UART_ERROR_BREAK_MASK	Break error.

enum nrf_uart_event_t

UART events.

Enumerator
NRF_UART_EVENT_CTS	Event from CTS line activation.
NRF_UART_EVENT_NCTS	Event from CTS line deactivation.
NRF_UART_EVENT_RXDRDY	Event from data ready in RXD.
NRF_UART_EVENT_TXDRDY	Event from data sent from TXD.
NRF_UART_EVENT_ERROR	Event from error detection.
NRF_UART_EVENT_RXTO	Event from receiver timeout.

enum nrf_uart_hwfc_t

Types of UART flow control modes.

Enumerator
NRF_UART_HWFC_DISABLED	HW flow control disabled.
NRF_UART_HWFC_ENABLED	HW flow control enabled.

enum nrf_uart_int_mask_t

UART interrupts.

Enumerator
NRF_UART_INT_MASK_CTS	CTS line activation interrupt.
NRF_UART_INT_MASK_NCTS	CTS line deactivation interrupt.
NRF_UART_INT_MASK_RXDRDY	Data ready in RXD interrupt.
NRF_UART_INT_MASK_TXDRDY	Data sent from TXD interrupt.
NRF_UART_INT_MASK_ERROR	Error detection interrupt.
NRF_UART_INT_MASK_RXTO	Receiver timeout interrupt.

enum nrf_uart_parity_t

Types of UART parity modes.

Enumerator
NRF_UART_PARITY_EXCLUDED	Parity excluded.
NRF_UART_PARITY_INCLUDED	Parity included.

enum nrf_uart_task_t

UART tasks.

Enumerator
NRF_UART_TASK_STARTRX	Task for starting reception.
NRF_UART_TASK_STOPRX	Task for stopping reception.
NRF_UART_TASK_STARTTX	Task for starting transmission.
NRF_UART_TASK_STOPTX	Task for stopping transmission.
NRF_UART_TASK_SUSPEND	Task for suspending UART.

Function Documentation

__STATIC_INLINE void nrf_uart_baudrate_set	(	NRF_UART_Type *	p_reg,
		nrf_uart_baudrate_t	baudrate
	)

Function for setting UART baudrate.

Parameters

p_reg	Pointer to the peripheral registers structure.
baudrate	Baudrate.

__STATIC_INLINE void nrf_uart_configure	(	NRF_UART_Type *	p_reg,
		nrf_uart_parity_t	parity,
		nrf_uart_hwfc_t	hwfc
	)

Function for configuring UART.

Parameters

p_reg	Pointer to the peripheral registers structure.
hwfc	Hardware flow control. Enabled if true.
parity	Parity. Included if true.

__STATIC_INLINE uint32_t nrf_uart_cts_pin_get ( NRF_UART_Type * p_reg )

Function for getting CTS pin.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE void nrf_uart_disable ( NRF_UART_Type * p_reg )

Function for disabling UART.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE void nrf_uart_enable ( NRF_UART_Type * p_reg )

Function for enabling UART.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE uint32_t nrf_uart_errorsrc_get_and_clear ( NRF_UART_Type * p_reg )

Function for getting error source mask. Function is clearing error source flags after reading.

Parameters

p_reg Pointer to the peripheral registers structure.

Returns: Mask with error source flags.

__STATIC_INLINE uint32_t nrf_uart_event_address_get	(	NRF_UART_Type *	p_reg,
		nrf_uart_event_t	event
	)

Function for returning the address of a specific UART event register.

Parameters

[in]	p_reg	Pointer to the peripheral registers structure.
[in]	event	Desired event.

Return values

Address of specified event register.

__STATIC_INLINE bool nrf_uart_event_check	(	NRF_UART_Type *	p_reg,
		nrf_uart_event_t	event
	)

Function for checking the state of a specific UART event.

Parameters

[in]	p_reg	Pointer to the peripheral registers structure.
[in]	event	Event to check.

Return values

True	if event is set, False otherwise.

__STATIC_INLINE void nrf_uart_event_clear	(	NRF_UART_Type *	p_reg,
		nrf_uart_event_t	event
	)

Function for clearing a specific UART event.

Parameters

[in]	p_reg	Pointer to the peripheral registers structure.
[in]	event	Event to clear.

__STATIC_INLINE void nrf_uart_hwfc_pins_disconnect ( NRF_UART_Type * p_reg )

Function for disconnecting flow control pins.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE void nrf_uart_hwfc_pins_set	(	NRF_UART_Type *	p_reg,
		uint32_t	pselrts,
		uint32_t	pselcts
	)

Function for configuring flow control pins.

Parameters

p_reg	Pointer to the peripheral registers structure.
pselrts	RTS pin number.
pselcts	CTS pin number.

__STATIC_INLINE void nrf_uart_int_disable	(	NRF_UART_Type *	p_reg,
		uint32_t	int_mask
	)

Function for disabling specific interrupts.

Parameters

p_reg	Pointer to the peripheral registers structure.
int_mask	Interrupts to disable.

__STATIC_INLINE void nrf_uart_int_enable	(	NRF_UART_Type *	p_reg,
		uint32_t	int_mask
	)

Function for enabling a specific interrupt.

Parameters

p_reg	Pointer to the peripheral registers structure.
int_mask	Interrupts to enable.

__STATIC_INLINE bool nrf_uart_int_enable_check	(	NRF_UART_Type *	p_reg,
		uint32_t	int_mask
	)

Function for retrieving the state of a given interrupt.

Parameters

p_reg	Pointer to the peripheral registers structure.
int_mask	Mask of interrupt to check.

Return values

true	If the interrupt is enabled.
false	If the interrupt is not enabled.

__STATIC_INLINE uint32_t nrf_uart_rts_pin_get ( NRF_UART_Type * p_reg )

Function for getting RTS pin.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE uint32_t nrf_uart_rx_pin_get ( NRF_UART_Type * p_reg )

Function for getting RX pin.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE uint8_t nrf_uart_rxd_get ( NRF_UART_Type * p_reg )

Function for reading RX data.

Parameters

p_reg Pointer to the peripheral registers structure.

Returns: Received byte.

__STATIC_INLINE uint32_t nrf_uart_task_address_get	(	NRF_UART_Type *	p_reg,
		nrf_uart_task_t	task
	)

Function for returning the address of a specific task register.

Parameters

p_reg	Pointer to the peripheral registers structure.
task	Task.

Returns: Task address.

__STATIC_INLINE void nrf_uart_task_trigger	(	NRF_UART_Type *	p_reg,
		nrf_uart_task_t	task
	)

Function for starting an UART task.

Parameters

p_reg	Pointer to the peripheral registers structure.
task	Task.

__STATIC_INLINE uint32_t nrf_uart_tx_pin_get ( NRF_UART_Type * p_reg )

Function for getting TX pin.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE void nrf_uart_txd_set	(	NRF_UART_Type *	p_reg,
		uint8_t	txd
	)

Function for setting Tx data.

Parameters

p_reg	Pointer to the peripheral registers structure.
txd	Byte.

__STATIC_INLINE void nrf_uart_txrx_pins_disconnect ( NRF_UART_Type * p_reg )

Function for disconnecting TX/RX pins.

Parameters

p_reg Pointer to the peripheral registers structure.

__STATIC_INLINE void nrf_uart_txrx_pins_set	(	NRF_UART_Type *	p_reg,
		uint32_t	pseltxd,
		uint32_t	pselrxd
	)

Function for configuring TX/RX pins.

Parameters

p_reg	Pointer to the peripheral registers structure.
pseltxd	TXD pin number.
pselrxd	RXD pin number.

Macros

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

Function Documentation