TX Power Service module.
More...
|
struct | ble_tps_init_t |
| TX Power Service init structure. This contains all options and data needed for initialization of the service. More...
|
|
struct | ble_tps_t |
| TX Power Service structure. This contains various status information for the service. More...
|
|
TX Power Service module.
This module implements the TX Power Service with the TX Power Level characteristic. During initialization it adds the TX Power Service and TX Power Level characteristic with the specified initial value to the BLE stack database.
It provides a function for letting the application update the TX Power Level characteristic.
- Note
- Attention! To maintain compliance with Nordic Semiconductor ASA Bluetooth profile qualification listings, this section of source code must not be modified.
#define BLE_TPS_DEF |
( |
|
_name | ) |
|
Macro for defining a ble_tps instance.
- Parameters
-
_name | Name of the instance. |
Function for initializing the TX Power Service.
- Parameters
-
[out] | p_hrs | TX Power Service structure. This structure will have to be supplied by the application. It will be initialized by this function, and will later be used to identify this particular service instance. |
[in] | p_tps_init | Information needed to initialize the service. |
- Returns
- NRF_SUCCESS on successful initialization of service, otherwise an error code.
void ble_tps_on_ble_evt |
( |
ble_evt_t const * |
p_ble_evt, |
|
|
void * |
p_context |
|
) |
| |
Function for handling the Application's BLE Stack events.
Handles all events from the BLE stack of interest to the TX Power Service.
- Parameters
-
[in] | p_ble_evt | Event received from the BLE stack. |
[in] | p_context | TX Power Service structure. |
uint32_t ble_tps_tx_power_level_set |
( |
ble_tps_t * |
p_tps, |
|
|
int8_t |
tx_power_level |
|
) |
| |
Function for setting the state of the Sensor Contact Detected bit.
- Parameters
-
[in] | p_tps | TX Power Service structure. |
[in] | tx_power_level | New TX Power Level (unit dBm, range -100 to 20). |
- Returns
- NRF_SUCCESS on success, otherwise an error code.