Macros | |
#define | I2S_ENABLED |
Enable I2S driver. More... | |
#define | I2S_CONFIG_SCK_PIN |
SCK pin. More... | |
#define | I2S_CONFIG_LRCK_PIN |
LRCK pin. More... | |
#define | I2S_CONFIG_MCK_PIN |
MCK pin. More... | |
#define | I2S_CONFIG_SDOUT_PIN |
SDOUT pin. More... | |
#define | I2S_CONFIG_SDIN_PIN |
SDIN pin. More... | |
#define | I2S_CONFIG_MASTER |
Mode. More... | |
#define | I2S_CONFIG_FORMAT |
Format. More... | |
#define | I2S_CONFIG_ALIGN |
Alignment. More... | |
#define | I2S_CONFIG_SWIDTH |
Sample width (bits) More... | |
#define | I2S_CONFIG_CHANNELS |
Channels. More... | |
#define | I2S_CONFIG_MCK_SETUP |
MCK behavior. More... | |
#define | I2S_CONFIG_RATIO |
MCK/LRCK ratio. More... | |
#define | I2S_CONFIG_IRQ_PRIORITY |
Interrupt priority. More... | |
#define | I2S_CONFIG_LOG_ENABLED |
Enables logging in the module. More... | |
#define | I2S_CONFIG_LOG_LEVEL |
Default Severity level. More... | |
#define | I2S_CONFIG_INFO_COLOR |
ANSI escape code prefix. More... | |
#define | I2S_CONFIG_DEBUG_COLOR |
ANSI escape code prefix. More... | |
#define I2S_CONFIG_ALIGN |
Alignment.
Following options are available:
#define I2S_CONFIG_CHANNELS |
Channels.
Following options are available:
#define I2S_CONFIG_DEBUG_COLOR |
ANSI escape code prefix.
Following options are available:
#define I2S_CONFIG_FORMAT |
Format.
Following options are available:
#define I2S_CONFIG_INFO_COLOR |
ANSI escape code prefix.
Following options are available:
#define I2S_CONFIG_IRQ_PRIORITY |
Interrupt priority.
Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
Following options are available:
#define I2S_CONFIG_LOG_ENABLED |
Enables logging in the module.
Set to 1 to activate.
#define I2S_CONFIG_LOG_LEVEL |
Default Severity level.
Following options are available:
#define I2S_CONFIG_LRCK_PIN |
LRCK pin.
Minimum value: 1 Maximum value: 31
#define I2S_CONFIG_MASTER |
Mode.
Following options are available:
#define I2S_CONFIG_MCK_PIN |
MCK pin.
#define I2S_CONFIG_MCK_SETUP |
MCK behavior.
Following options are available:
#define I2S_CONFIG_RATIO |
MCK/LRCK ratio.
Following options are available:
#define I2S_CONFIG_SCK_PIN |
SCK pin.
Minimum value: 0 Maximum value: 31
#define I2S_CONFIG_SDIN_PIN |
SDIN pin.
Minimum value: 0 Maximum value: 31
#define I2S_CONFIG_SDOUT_PIN |
SDOUT pin.
Minimum value: 0 Maximum value: 31
#define I2S_CONFIG_SWIDTH |
Sample width (bits)
Following options are available:
#define I2S_ENABLED |
Enable I2S driver.
Set to 1 to activate.