Bootloader with Device Firmware Update (DFU) functionality. More...
Modules | |
Flash operations | |
MBR functions | |
Request handling | |
DFU settings | |
DFU types | |
DFU utilities | |
Macros | |
#define | BOOTLOADER_BUTTON (BSP_BUTTON_3) |
Functions | |
uint32_t | nrf_dfu_init (void) |
Function for initializing a DFU operation. More... | |
bool | nrf_dfu_enter_check (void) |
Function for checking if DFU mode should be entered. More... | |
bool | nrf_dfu_check_failsafe_reset (void) |
Function for checking if DFU should be reset (failsafe). More... | |
void | nrf_dfu_wait (void) |
Function for blocking until an event (i.e. incoming BLE packet) arrives. | |
Bootloader with Device Firmware Update (DFU) functionality.
The DFU bootloader module, in combination with the Bootloader module, can be used to implement a bootloader that supports Device Firmware Updates.
#define BOOTLOADER_BUTTON (BSP_BUTTON_3) |
Button for entering DFU mode.
bool nrf_dfu_check_failsafe_reset | ( | void | ) |
Function for checking if DFU should be reset (failsafe).
This function will check if DFU should be reset (failsafe).
If this returns true, DFU mode will be entered and DFU will be reset.
true | If DFU must be reset (failsafe). |
false | If there is no need to reset DFU. |
bool nrf_dfu_enter_check | ( | void | ) |
Function for checking if DFU mode should be entered.
This function checks whether DFU mode is required.
true | If DFU mode must be entered. |
false | If there is no need to enter DFU mode. |
uint32_t nrf_dfu_init | ( | void | ) |
Function for initializing a DFU operation.
This function initializes a DFU operation and any transports that are registered in the system.
NRF_SUCCESS | If the DFU operation was successfully initialized. |