Macros | |
#define | SPIS_ENABLED |
Set to 1 to activate. More... | |
#define | SPIS_DEFAULT_CONFIG_IRQ_PRIORITY |
Interrupt priority. More... | |
#define | SPIS_DEFAULT_MODE |
Mode. More... | |
#define | SPIS_DEFAULT_BIT_ORDER |
SPIS default bit order. More... | |
#define | SPIS_DEFAULT_DEF |
SPIS default DEF character. More... | |
#define | SPIS_DEFAULT_ORC |
SPIS default ORC character. More... | |
#define | SPIS0_ENABLED |
Enable SPIS0 instance. More... | |
#define | SPIS1_ENABLED |
Enable SPIS1 instance. More... | |
#define | SPIS2_ENABLED |
Enable SPIS2 instance. More... | |
#define | SPIS_CONFIG_LOG_ENABLED |
Enables logging in the module. More... | |
#define | SPIS_CONFIG_LOG_LEVEL |
Default Severity level. More... | |
#define | SPIS_CONFIG_INFO_COLOR |
ANSI escape code prefix. More... | |
#define | SPIS_CONFIG_DEBUG_COLOR |
ANSI escape code prefix. More... | |
#define SPIS0_ENABLED |
Enable SPIS0 instance.
Set to 1 to activate.
#define SPIS1_ENABLED |
Enable SPIS1 instance.
Set to 1 to activate.
#define SPIS2_ENABLED |
Enable SPIS2 instance.
Set to 1 to activate.
#define SPIS_CONFIG_DEBUG_COLOR |
ANSI escape code prefix.
Following options are available:
#define SPIS_CONFIG_INFO_COLOR |
ANSI escape code prefix.
Following options are available:
#define SPIS_CONFIG_LOG_ENABLED |
Enables logging in the module.
Set to 1 to activate.
#define SPIS_CONFIG_LOG_LEVEL |
Default Severity level.
Following options are available:
#define SPIS_DEFAULT_BIT_ORDER |
SPIS default bit order.
Following options are available:
#define SPIS_DEFAULT_CONFIG_IRQ_PRIORITY |
Interrupt priority.
Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
Following options are available:
#define SPIS_DEFAULT_DEF |
SPIS default DEF character.
Minimum value: 0 Maximum value: 255
#define SPIS_DEFAULT_MODE |
Mode.
Following options are available:
#define SPIS_DEFAULT_ORC |
SPIS default ORC character.
Minimum value: 0 Maximum value: 255
#define SPIS_ENABLED |
Set to 1 to activate.