Macros | |
#define | ANTFS_ENABLED |
Set to 1 to activate. More... | |
#define | ANTFS_CONFIG_NETWORK_NUMBER |
ANT-FS network number. More... | |
#define | ANTFS_CONFIG_CHANNEL_NUMBER |
ANT-FS channel number. More... | |
#define | ANTFS_CONFIG_PAIRING_TIMEOUT |
Pairing timeout - how long the UI will wait for a response to a pairing request before switching to the link layer, in seconds. More... | |
#define | ANTFS_CONFIG_LINK_COMMAND_TIMEOUT |
Command timeout - how long the client will wait without receiving any commands before switching to the link layer, in seconds. More... | |
#define | ANTFS_CONFIG_TRANS_TYPE |
ANT-FS Transmission Type. More... | |
#define | ANTFS_CONFIG_DEVICE_TYPE |
ANT device type for channel configuration. More... | |
#define | ANTFS_CONFIG_BEACON_STATUS_PERIOD |
ANT-FS Beacon Message Period. More... | |
#define | ANTFS_CONFIG_TRANSMIT_POWER |
ANT Transmit Power. More... | |
#define | ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER |
ANT Custom Transmit Power. More... | |
#define | ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED |
Use pairing and key exchange authentication. More... | |
#define | ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED |
Use passkey authentication. More... | |
#define | ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED |
Allow host to bypass authentication. More... | |
#define | ANTFS_CONFIG_UPLOAD_ENABLED |
Support upload operation. More... | |
#define | ANTFS_CONFIG_DEBUG_LED_ENABLED |
Enables LED debug in the module. More... | |
#define ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED |
Use pairing and key exchange authentication.
Set to 1 to activate.
#define ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED |
Use passkey authentication.
Set to 1 to activate.
#define ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED |
Allow host to bypass authentication.
Set to 1 to activate.
#define ANTFS_CONFIG_BEACON_STATUS_PERIOD |
ANT-FS Beacon Message Period.
Following options are available:
#define ANTFS_CONFIG_CHANNEL_NUMBER |
ANT-FS channel number.
#define ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER |
ANT Custom Transmit Power.
#define ANTFS_CONFIG_DEBUG_LED_ENABLED |
Enables LED debug in the module.
Set to 1 to activate.
#define ANTFS_CONFIG_DEVICE_TYPE |
ANT device type for channel configuration.
#define ANTFS_CONFIG_LINK_COMMAND_TIMEOUT |
Command timeout - how long the client will wait without receiving any commands before switching to the link layer, in seconds.
#define ANTFS_CONFIG_NETWORK_NUMBER |
ANT-FS network number.
#define ANTFS_CONFIG_PAIRING_TIMEOUT |
Pairing timeout - how long the UI will wait for a response to a pairing request before switching to the link layer, in seconds.
#define ANTFS_CONFIG_TRANS_TYPE |
ANT-FS Transmission Type.
#define ANTFS_CONFIG_TRANSMIT_POWER |
ANT Transmit Power.
Following options are available:
#define ANTFS_CONFIG_UPLOAD_ENABLED |
Support upload operation.
Set to 1 to activate.
#define ANTFS_ENABLED |
Set to 1 to activate.