GAP scanning parameters. More...
#include <ble_gap.h>
Data Fields | |
uint8_t | active: 1 |
uint8_t | use_whitelist: 1 |
uint8_t | adv_dir_report: 1 |
uint16_t | interval |
uint16_t | window |
uint16_t | timeout |
GAP scanning parameters.
uint8_t ble_gap_scan_params_t::active |
If 1, perform active scanning (scan requests).
uint8_t ble_gap_scan_params_t::adv_dir_report |
If 1, also report directed advertisements where the initiator field is set to a private resolvable address, even if the address did not resolve to an entry in the device identity list. A report will be generated even if the peer is not in the whitelist.
uint16_t ble_gap_scan_params_t::interval |
Scan interval between 0x0004 and 0x4000 in 0.625ms units (2.5ms to 10.24s).
uint16_t ble_gap_scan_params_t::timeout |
Scan timeout between 0x0001 and 0xFFFF in seconds, 0x0000 disables timeout.
uint8_t ble_gap_scan_params_t::use_whitelist |
If 1, filter advertisers using current active whitelist.
uint16_t ble_gap_scan_params_t::window |
Scan window between 0x0004 and 0x4000 in 0.625ms units (2.5ms to 10.24s).