ble_cfg_t | BLE Configuration type, wrapping the module specific configurations |
ble_common_cfg_t | Common BLE Configuration type, wrapping the common configurations |
ble_common_cfg_vs_uuid_t | Configuration of Vendor Specific base UUIDs, set with sd_ble_cfg_set |
ble_common_evt_t | Event structure for events not associated with a specific function module |
ble_common_opt_conn_evt_ext_t | Configuration of extended BLE connection events |
ble_common_opt_extended_rc_cal_t | Enable/disable extended RC calibration |
ble_common_opt_pa_lna_t | PA & LNA GPIO toggle configuration |
ble_common_opt_t | Option structure for common options |
ble_conn_cfg_t | BLE connection configuration type, wrapping the module specific configurations, set with sd_ble_cfg_set |
ble_data_t | Data structure |
ble_evt_hdr_t | BLE Event header |
ble_evt_t | Common BLE Event type, wrapping the module specific event reports |
ble_evt_user_mem_release_t | Event structure for BLE_EVT_USER_MEM_RELEASE |
ble_evt_user_mem_request_t | Event structure for BLE_EVT_USER_MEM_REQUEST |
ble_gap_addr_t | Bluetooth Low Energy address |
ble_gap_adv_data_t | GAP advertising data buffers |
ble_gap_adv_params_t | GAP advertising parameters |
ble_gap_adv_properties_t | Advertising event properties |
ble_gap_adv_report_type_t | Advertising report type |
ble_gap_aux_pointer_t | Advertising Auxiliary Pointer |
ble_gap_cfg_car_incl_cfg_t | Central Address Resolution include configuration parameters, set with sd_ble_cfg_set |
ble_gap_cfg_device_name_t | Device name and its properties, set with sd_ble_cfg_set |
ble_gap_cfg_ppcp_incl_cfg_t | Peripheral Preferred Connection Parameters include configuration parameters, set with sd_ble_cfg_set |
ble_gap_cfg_role_count_t | Configuration of maximum concurrent connections in the different connected roles, set with sd_ble_cfg_set |
ble_gap_cfg_t | Configuration structure for GAP configurations |
ble_gap_conn_cfg_t | BLE GAP connection configuration parameters, set with sd_ble_cfg_set |
ble_gap_conn_event_trigger_t | Connection event triggering parameters |
ble_gap_conn_params_t | GAP connection parameters |
ble_gap_conn_sec_mode_t | GAP connection security modes |
ble_gap_conn_sec_t | GAP connection security status |
ble_gap_data_length_limitation_t | Data Length Update Procedure local limitation |
ble_gap_data_length_params_t | Data Length Update Procedure parameters |
ble_gap_enc_info_t | GAP Encryption Information |
ble_gap_enc_key_t | Encryption Key |
ble_gap_evt_adv_report_t | Event structure for BLE_GAP_EVT_ADV_REPORT |
ble_gap_evt_adv_set_terminated_t | Event structure for BLE_GAP_EVT_ADV_SET_TERMINATED |
ble_gap_evt_auth_key_request_t | Event structure for BLE_GAP_EVT_AUTH_KEY_REQUEST |
ble_gap_evt_auth_status_t | Event structure for BLE_GAP_EVT_AUTH_STATUS |
ble_gap_evt_conn_param_update_request_t | Event structure for BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST |
ble_gap_evt_conn_param_update_t | Event structure for BLE_GAP_EVT_CONN_PARAM_UPDATE |
ble_gap_evt_conn_sec_update_t | Event structure for BLE_GAP_EVT_CONN_SEC_UPDATE |
ble_gap_evt_connected_t | Event structure for BLE_GAP_EVT_CONNECTED |
ble_gap_evt_data_length_update_request_t | Event structure for BLE_GAP_EVT_DATA_LENGTH_UPDATE_REQUEST |
ble_gap_evt_data_length_update_t | Event structure for BLE_GAP_EVT_DATA_LENGTH_UPDATE |
ble_gap_evt_disconnected_t | Event structure for BLE_GAP_EVT_DISCONNECTED |
ble_gap_evt_key_pressed_t | Event structure for BLE_GAP_EVT_KEY_PRESSED |
ble_gap_evt_lesc_dhkey_request_t | Event structure for BLE_GAP_EVT_LESC_DHKEY_REQUEST |
ble_gap_evt_passkey_display_t | Event structure for BLE_GAP_EVT_PASSKEY_DISPLAY |
ble_gap_evt_phy_update_request_t | Event structure for BLE_GAP_EVT_PHY_UPDATE_REQUEST |
ble_gap_evt_phy_update_t | Event Structure for BLE_GAP_EVT_PHY_UPDATE |
ble_gap_evt_qos_channel_survey_report_t | Event structure for BLE_GAP_EVT_QOS_CHANNEL_SURVEY_REPORT |
ble_gap_evt_rssi_changed_t | Event structure for BLE_GAP_EVT_RSSI_CHANGED |
ble_gap_evt_scan_req_report_t | Event structure for BLE_GAP_EVT_SCAN_REQ_REPORT |
ble_gap_evt_sec_info_request_t | Event structure for BLE_GAP_EVT_SEC_INFO_REQUEST |
ble_gap_evt_sec_params_request_t | Event structure for BLE_GAP_EVT_SEC_PARAMS_REQUEST |
ble_gap_evt_sec_request_t | Event structure for BLE_GAP_EVT_SEC_REQUEST |
ble_gap_evt_t | GAP event structure |
ble_gap_evt_timeout_t | Event structure for BLE_GAP_EVT_TIMEOUT |
ble_gap_id_key_t | Identity Key |
ble_gap_irk_t | Identity Resolving Key |
ble_gap_lesc_dhkey_t | GAP LE Secure Connections DHKey |
ble_gap_lesc_oob_data_t | GAP LE Secure Connections OOB data |
ble_gap_lesc_p256_pk_t | GAP LE Secure Connections P-256 Public Key |
ble_gap_master_id_t | GAP Master Identification |
ble_gap_opt_auth_payload_timeout_t | Authenticated payload timeout option |
ble_gap_opt_ch_map_t | Channel Map option |
ble_gap_opt_compat_mode_1_t | Compatibility mode 1 option |
ble_gap_opt_local_conn_latency_t | Local connection latency option |
ble_gap_opt_passkey_t | Passkey Option |
ble_gap_opt_slave_latency_disable_t | Disable slave latency |
ble_gap_opt_t | Option structure for GAP options |
ble_gap_phys_t | PHY preferences for TX and RX |
ble_gap_privacy_params_t | Privacy |
ble_gap_scan_params_t | GAP scanning parameters |
ble_gap_sec_kdist_t | Keys that can be exchanged during a bonding procedure |
ble_gap_sec_keys_t | Security Keys |
ble_gap_sec_keyset_t | Security key set for both local and peer keys |
ble_gap_sec_levels_t | Security levels supported |
ble_gap_sec_params_t | GAP security parameters |
ble_gap_sign_info_t | GAP Signing Information |
ble_gatt_char_ext_props_t | GATT Characteristic Extended Properties |
ble_gatt_char_props_t | GATT Characteristic Properties |
ble_gatt_conn_cfg_t | BLE GATT connection configuration parameters, set with sd_ble_cfg_set |
ble_gattc_attr_info128_t | Attribute Information for 128-bit Attribute UUID |
ble_gattc_attr_info16_t | Attribute Information for 16-bit Attribute UUID |
ble_gattc_char_t | GATT characteristic |
ble_gattc_conn_cfg_t | BLE GATTC connection configuration parameters, set with sd_ble_cfg_set |
ble_gattc_desc_t | GATT descriptor |
ble_gattc_evt_attr_info_disc_rsp_t | Event structure for BLE_GATTC_EVT_ATTR_INFO_DISC_RSP |
ble_gattc_evt_char_disc_rsp_t | Event structure for BLE_GATTC_EVT_CHAR_DISC_RSP |
ble_gattc_evt_char_val_by_uuid_read_rsp_t | Event structure for BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP |
ble_gattc_evt_char_vals_read_rsp_t | Event structure for BLE_GATTC_EVT_CHAR_VALS_READ_RSP |
ble_gattc_evt_desc_disc_rsp_t | Event structure for BLE_GATTC_EVT_DESC_DISC_RSP |
ble_gattc_evt_exchange_mtu_rsp_t | Event structure for BLE_GATTC_EVT_EXCHANGE_MTU_RSP |
ble_gattc_evt_hvx_t | Event structure for BLE_GATTC_EVT_HVX |
ble_gattc_evt_prim_srvc_disc_rsp_t | Event structure for BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP |
ble_gattc_evt_read_rsp_t | Event structure for BLE_GATTC_EVT_READ_RSP |
ble_gattc_evt_rel_disc_rsp_t | Event structure for BLE_GATTC_EVT_REL_DISC_RSP |
ble_gattc_evt_t | GATTC event structure |
ble_gattc_evt_timeout_t | Event structure for BLE_GATTC_EVT_TIMEOUT |
ble_gattc_evt_write_cmd_tx_complete_t | Event structure for BLE_GATTC_EVT_WRITE_CMD_TX_COMPLETE |
ble_gattc_evt_write_rsp_t | Event structure for BLE_GATTC_EVT_WRITE_RSP |
ble_gattc_handle_range_t | Operation Handle Range |
ble_gattc_handle_value_t | GATT read by UUID handle value pair |
ble_gattc_include_t | GATT include |
ble_gattc_opt_t | Option structure for GATTC options |
ble_gattc_opt_uuid_disc_t | UUID discovery option |
ble_gattc_service_t | GATT service |
ble_gattc_write_params_t | Write Parameters |
ble_gatts_attr_md_t | Attribute metadata |
ble_gatts_attr_t | GATT Attribute |
ble_gatts_authorize_params_t | GATT Authorization parameters |
ble_gatts_cfg_attr_tab_size_t | Attribute table size configuration parameters, set with sd_ble_cfg_set |
ble_gatts_cfg_service_changed_t | Service Changed Inclusion configuration parameters, set with sd_ble_cfg_set |
ble_gatts_cfg_t | Config structure for GATTS configurations |
ble_gatts_char_handles_t | GATT Characteristic Definition Handles |
ble_gatts_char_md_t | GATT Characteristic metadata |
ble_gatts_char_pf_t | GATT Characteristic Presentation Format |
ble_gatts_conn_cfg_t | BLE GATTS connection configuration parameters, set with sd_ble_cfg_set |
ble_gatts_evt_exchange_mtu_request_t | Event structure for BLE_GATTS_EVT_EXCHANGE_MTU_REQUEST |
ble_gatts_evt_hvc_t | Event structure for BLE_GATTS_EVT_HVC |
ble_gatts_evt_hvn_tx_complete_t | Event structure for BLE_GATTS_EVT_HVN_TX_COMPLETE |
ble_gatts_evt_read_t | Event substructure for authorized read requests, see ble_gatts_evt_rw_authorize_request_t |
ble_gatts_evt_rw_authorize_request_t | Event structure for BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST |
ble_gatts_evt_sys_attr_missing_t | Event structure for BLE_GATTS_EVT_SYS_ATTR_MISSING |
ble_gatts_evt_t | GATTS event structure |
ble_gatts_evt_timeout_t | Event structure for BLE_GATTS_EVT_TIMEOUT |
ble_gatts_evt_write_t | Event structure for BLE_GATTS_EVT_WRITE |
ble_gatts_hvx_params_t | GATT HVx parameters |
ble_gatts_rw_authorize_reply_params_t | GATT Read or Write Authorize Reply parameters |
ble_gatts_value_t | GATT Attribute Value |
ble_l2cap_ch_rx_params_t | L2CAP channel RX parameters |
ble_l2cap_ch_setup_params_t | L2CAP channel setup parameters |
ble_l2cap_ch_tx_params_t | L2CAP channel TX parameters |
ble_l2cap_conn_cfg_t | BLE L2CAP connection configuration parameters, set with sd_ble_cfg_set |
ble_l2cap_evt_ch_credit_t | L2CAP Channel Credit received event |
ble_l2cap_evt_ch_rx_t | L2CAP Channel received SDU event |
ble_l2cap_evt_ch_sdu_buf_released_t | L2CAP Channel SDU Data Buffer Released event |
ble_l2cap_evt_ch_setup_refused_t | L2CAP Channel Setup Refused event |
ble_l2cap_evt_ch_setup_request_t | L2CAP Channel Setup Request event |
ble_l2cap_evt_ch_setup_t | L2CAP Channel Setup Completed event |
ble_l2cap_evt_ch_tx_t | L2CAP Channel transmitted SDU event |
ble_l2cap_evt_t | L2CAP event structure |
ble_opt_t | Common BLE Option type, wrapping the module specific options |
ble_pa_lna_cfg_t | Configuration parameters for the PA and LNA |
ble_user_mem_block_t | User Memory Block |
ble_uuid128_t | 128 bit UUID values |
ble_uuid_t | Bluetooth Low Energy UUID type, encapsulates both 16-bit and 128-bit UUIDs |
ble_version_t | Version Information |
nrf_clock_lf_cfg_t | Type representing LFCLK oscillator source |
nrf_ecb_hal_data_block_t | AES ECB block. Used to provide multiple blocks in a single call to sd_ecb_blocks_encrypt |
nrf_ecb_hal_data_t | AES ECB data structure |
nrf_nvic_state_t | Type representing the state struct for the SoftDevice NVIC module |
nrf_radio_request_earliest_t | Parameters for a request for a timeslot as early as possible |
nrf_radio_request_normal_t | Parameters for a normal radio timeslot request |
nrf_radio_request_t | Radio timeslot request parameters |
nrf_radio_signal_callback_return_param_t | Return parameters of the radio timeslot signal callback |
sd_mbr_command_compare_t | This command works like memcmp, but takes the length in words |
sd_mbr_command_copy_bl_t | This command copies a new BootLoader |
sd_mbr_command_copy_sd_t | This command copies part of a new SoftDevice |
sd_mbr_command_irq_forward_address_set_t | Sets the base address of the interrupt vector table for interrupts forwarded from the MBR |
sd_mbr_command_t | Input structure containing data used when calling sd_mbr_command |
sd_mbr_command_vector_table_base_set_t | Change the address the MBR starts after a reset |