GAP scanning parameters. More...
#include <ble_gap.h>
Data Fields | |
uint8_t | extended: 1 |
uint8_t | report_incomplete_evts: 1 |
uint8_t | active: 1 |
uint8_t | filter_policy: 2 |
uint8_t | scan_phys |
uint16_t | interval |
uint16_t | window |
uint16_t | timeout |
ble_gap_ch_mask_t | channel_mask |
GAP scanning parameters.
uint8_t ble_gap_scan_params_t::active |
If 1, perform active scanning by sending scan requests. This parameter is ignored when used with sd_ble_gap_connect.
ble_gap_ch_mask_t ble_gap_scan_params_t::channel_mask |
Channel mask for primary and secondary advertising channels.
At least one of the primary channels, that is channel index 37-39, must be set to 0. Masking away secondary channels is not supported.
uint8_t ble_gap_scan_params_t::extended |
If 1, the scanner will accept extended advertising packets. If set to 0, the scanner will not receive advertising packets on secondary advertising channels, and will not be able to receive long advertising PDUs.
uint8_t ble_gap_scan_params_t::filter_policy |
Scanning filter policy.
uint16_t ble_gap_scan_params_t::interval |
Scan interval in 625 us units.
uint8_t ble_gap_scan_params_t::report_incomplete_evts |
If 1, events of type ble_gap_evt_adv_report_t may have ble_gap_adv_report_type_t::status set to BLE_GAP_ADV_DATA_STATUS_INCOMPLETE_MORE_DATA. This parameter is ignored when used with sd_ble_gap_connect
uint8_t ble_gap_scan_params_t::scan_phys |
Bitfield of PHYs to scan on. If set to @ref BLE_GAP_PHY_AUTO,
scan_phys will default to BLE_GAP_PHY_1MBPS.
uint16_t ble_gap_scan_params_t::timeout |
Scan timeout in 10 ms units.
uint16_t ble_gap_scan_params_t::window |
Scan window in 625 us units.@sa BLE_GAP_SCAN_WINDOW.
If scan_phys contains both BLE_GAP_PHY_1MBPS and BLE_GAP_PHY_CODED interval shall be larger than or equal to twice the scan window.