PA & LNA GPIO toggle configuration. More...
#include <ble.h>
Data Fields | |
ble_pa_lna_cfg_t | pa_cfg |
ble_pa_lna_cfg_t | lna_cfg |
uint8_t | ppi_ch_id_set |
uint8_t | ppi_ch_id_clr |
uint8_t | gpiote_ch_id |
PA & LNA GPIO toggle configuration.
This option configures the SoftDevice to toggle pins when the radio is active for use with a power amplifier and/or a low noise amplifier.
Toggling the pins is achieved by using two PPI channels and a GPIOTE channel. The hardware channel IDs are provided by the application and should be regarded as reserved as long as any PA/LNA toggling is enabled.
uint8_t ble_common_opt_pa_lna_t::gpiote_ch_id |
GPIOTE channel used for radio pin toggling
ble_pa_lna_cfg_t ble_common_opt_pa_lna_t::lna_cfg |
Low Noise Amplifier configuration
ble_pa_lna_cfg_t ble_common_opt_pa_lna_t::pa_cfg |
Power Amplifier configuration
uint8_t ble_common_opt_pa_lna_t::ppi_ch_id_clr |
PPI channel used for radio pin clearing
uint8_t ble_common_opt_pa_lna_t::ppi_ch_id_set |
PPI channel used for radio pin setting