Sets the base address of the interrupt vector table for interrupts forwarded from the MBR. More...
#include <nrf_mbr.h>
Data Fields | |
| uint32_t | address |
Sets the base address of the interrupt vector table for interrupts forwarded from the MBR.
Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.
To restore default forwarding thiss function should be called with
| address | set to 0. The MBR will then start forwarding to interrupts to the adress in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set. |
| NRF_SUCCESS |
| uint32_t sd_mbr_command_vector_table_base_set_t::address |
The base address of the interrupt vector table for forwarded interrupts.