Packet manager configuration

Macros
#define	PACKET_MGR_DEBUG_MODE   0
	Set to 1 to enable debug mode for the packet manager. More...
#define	PACKET_MGR_MEMORY_POOL_SIZE   4096
	Size of the packet manager memory pool in bytes. More...
#define	PACKET_MGR_BLAME_MODE   0
	Packet manager blame mode. More...

Detailed Description

Note

These configuration parameters are only relevant when the mesh_mem_packet_mgr.c is used as the dynamic memory backend. The default is the mesh_mem_stdlib.c backend. Its memory pool size is directly controlled by the heap size.

Macro Definition Documentation

PACKET_MGR_DEBUG_MODE

#define PACKET_MGR_DEBUG_MODE   0

Set to 1 to enable debug mode for the packet manager.

Warning

In debug mode, the packet manager will print out a lot of information and this will cause the system to assert due to timeslot violation.

Definition at line 336 of file nrf_mesh_config_core.h.

PACKET_MGR_MEMORY_POOL_SIZE

#define PACKET_MGR_MEMORY_POOL_SIZE   4096

Size of the packet manager memory pool in bytes.

Warning

The value of the memory pool cannot currently exceed the value of PACKET_MGR_PACKET_MAXLEN, due to the current design of the memory manager.

Definition at line 346 of file nrf_mesh_config_core.h.

PACKET_MGR_BLAME_MODE

#define PACKET_MGR_BLAME_MODE   0

Packet manager blame mode.

The blame mode adds an additional field to the packet header which records the last location a packet manager function was called from. This can be useful in some debugging scenarioes, such as when a bug is suspected of being caused by a reference counting error. It is not intended for regular use, so do not enable unless you are debugging the packet manager usage.

Definition at line 359 of file nrf_mesh_config_core.h.