General compile time configuration of the bearer layer. More...
Macros | |
#define | MESH_PA_SETUP_TIME_US 18 |
External power amplifier (PA) setup time in microseconds. More... | |
#define | MESH_LNA_SETUP_TIME_US 18 |
External low noise amplifier (LNA) setup time in microseconds. More... | |
#define | BEARER_ACTION_TIMER_INDEX 2 |
HF timer peripheral index to allocate for bearer handler. More... | |
#define | APPLICATION_TX_COMPLETE_OVERHEAD_US 80 |
Maximum overhead of application TX Complete call,. | |
#define | BEARER_ACCESS_ADDR_DEFAULT BEARER_ACCESS_ADDR_NONCONN |
Default access address. More... | |
#define | BEARER_ADV_CHANNELS_MAX 3 |
Maximum number of channels an advertiser can transmit on. More... | |
#define | BEARER_ADV_INT_DEFAULT_MS 20 |
Default advertisement interval. More... | |
#define | BEARER_SCAN_INT_DEFAULT_MS 2000 |
Default scan interval. | |
#define | BEARER_SCAN_WINDOW_DEFAULT_MS 2000 |
Default scan window. | |
#define | SCANNER_BUFFER_SIZE 512 |
Default scanner buffer size. | |
#define | INSTABURST_RX_BUFFER_SIZE (1024) |
Buffer size for the experimental Instaburst RX module. More... | |
#define | EXPERIMENTAL_INSTABURST_ENABLED 0 |
Experimental instaburst feature flag. More... | |
General compile time configuration of the bearer layer.
#define MESH_PA_SETUP_TIME_US 18 |
External power amplifier (PA) setup time in microseconds.
Must be lower than the radio rampup time (as specified in the Electrical specification of each chip's Product Specification).
Definition at line 63 of file nrf_mesh_config_bearer.h.
#define MESH_LNA_SETUP_TIME_US 18 |
External low noise amplifier (LNA) setup time in microseconds.
Must be lower than the radio rampup time (as specified in the Electrical specification of each chip's Product Specification).
Definition at line 72 of file nrf_mesh_config_bearer.h.
#define BEARER_ACTION_TIMER_INDEX 2 |
HF timer peripheral index to allocate for bearer handler.
E.g. if set to 2, NRF_TIMER2 will be used. Must be a literal number.
Definition at line 77 of file nrf_mesh_config_bearer.h.
#define BEARER_ACCESS_ADDR_DEFAULT BEARER_ACCESS_ADDR_NONCONN |
Default access address.
Definition at line 87 of file nrf_mesh_config_bearer.h.
#define BEARER_ADV_CHANNELS_MAX 3 |
Maximum number of channels an advertiser can transmit on.
Definition at line 92 of file nrf_mesh_config_bearer.h.
#define BEARER_ADV_INT_DEFAULT_MS 20 |
Default advertisement interval.
Definition at line 97 of file nrf_mesh_config_bearer.h.
#define INSTABURST_RX_BUFFER_SIZE (1024) |
Buffer size for the experimental Instaburst RX module.
Definition at line 117 of file nrf_mesh_config_bearer.h.
#define EXPERIMENTAL_INSTABURST_ENABLED 0 |
Experimental instaburst feature flag.
Normally enabled through CMake option.
Definition at line 122 of file nrf_mesh_config_bearer.h.