Main configuration structure for the module. More...
#include <nrf_esb.h>
Data Fields | |
| nrf_esb_protocol_t | protocol |
| nrf_esb_mode_t | mode |
| nrf_esb_event_handler_t | event_handler |
| nrf_esb_bitrate_t | bitrate |
| nrf_esb_crc_t | crc |
| nrf_esb_tx_power_t | tx_output_power |
| uint16_t | retransmit_delay |
| uint16_t | retransmit_count |
| nrf_esb_tx_mode_t | tx_mode |
| uint8_t | radio_irq_priority |
| uint8_t | event_irq_priority |
| uint8_t | payload_length |
| bool | selective_auto_ack |
Main configuration structure for the module.
| nrf_esb_bitrate_t nrf_esb_config_t::bitrate |
Enhanced ShockBurst bitrate mode.
| nrf_esb_crc_t nrf_esb_config_t::crc |
Enhanced ShockBurst CRC modes.
| nrf_esb_event_handler_t nrf_esb_config_t::event_handler |
Enhanced ShockBurst event handler.
| uint8_t nrf_esb_config_t::event_irq_priority |
ESB event interrupt priority.
| nrf_esb_mode_t nrf_esb_config_t::mode |
Enhanced ShockBurst mode.
| uint8_t nrf_esb_config_t::payload_length |
Length of the payload (maximum length depends on the platforms that are used on each side).
| nrf_esb_protocol_t nrf_esb_config_t::protocol |
Enhanced ShockBurst protocol.
| uint8_t nrf_esb_config_t::radio_irq_priority |
nRF radio interrupt priority.
| uint16_t nrf_esb_config_t::retransmit_count |
The number of retransmissions attempts before transmission fail.
| uint16_t nrf_esb_config_t::retransmit_delay |
The delay between each retransmission of unacknowledged packets.
| bool nrf_esb_config_t::selective_auto_ack |
Enable or disable selective auto acknowledgment.
| nrf_esb_tx_mode_t nrf_esb_config_t::tx_mode |
Enhanced ShockBurst transmission mode.
| nrf_esb_tx_power_t nrf_esb_config_t::tx_output_power |
Enhanced ShockBurst radio transmission power mode.