Program your DK with the Smart Remote 3 firmware

To use the DK add-on, the nRF51 DK must first be programmed with the firmware. The product example is preprogrammed, and does not need any programming to get started.

1. Connect the nRF51 DK with DK add-on attached to a computer with a USB cable.
   Important: When programming the DK for the first time, it is recommended not to connect the DK add-on hardware, as the DK I/Os are in an unknown state, which may result in overcurrent consumption.
2. See Firmware update of Smart Remote 3 for details on firmware update.