These environmental specifications
and conditions contain the values that are essential for using the Power Profiler Kit II (PPK2).
Table 1. Environmental specifications
Item |
Name |
Min |
Typ |
Max |
Unit |
Description |
Operating temperature |
Op_Temp |
5 |
|
40 |
°C |
|
Table 2. Normal environmental conditions
Item |
Description |
Indoor or outdoor use |
Indoor use |
Altitude |
Up to 2000 m |
Temperature |
5–40 °C |
Relative humidity |
Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C |
Mains supply voltage fluctuations |
Not applicable (equipment not connected to mains) |
Overvoltage category |
Category 0 based on EN 61010-1-2-030 |
Wet location |
Not applicable |
Pollution degree |
2 |
Note: Do not use the PPK2 for measurements within Measurement categories II, III, or IV, or for measurements on MAINS circuits or on circuits derived from Overvoltage Category II, III, or IV which may have transient voltages where they can cause a hazard. An analysis of the working voltages, loop impedances, temporary overvoltages, and transient overvoltages in the system must be conducted to making measurements.