nRF7002 EK v1.0.0

Solder bridge configuration

The nRF7002 EK has three solder bridges, one for each power net. You must cut the corresponding solder bridge when measuring current.

The following section includes a solder bridge overview table and an image of the solder bridges on the back of the nRF7002 EK.

Table 1. Solder bridge configuration
Solder bridge Default Function
SB1 Closed Cut to disconnect VBAT
SB2 Closed Cut to disconnect IOVDD
SB3 Closed Cut to disconnect OTPVDD

Figure 1. nRF7002 EK solder bridges
nRF7002 EK (PCA63556) front view