The nRF5340 DK is a hardware development platform used to design and develop application firmware on the nRF5340
System on Chip (SoC).
The key features of the Development Kit (DK) are:
- nRF5340
SoC
- Support for the following wireless protocols:
- Bluetooth®
Low Energy
- NFC
- 802.15.4
- Thread
- Zigbee
- ANTâ„¢
- 2.4 GHz proprietary
- Arduino Rev3 compatibility
- 2.4 GHz and NFC antennas
- SWF RF connector for direct RF measurements
- User-programmable LEDs (4) and buttons (4)
- SEGGER J-Link OB programmer/debugger
- Pins for measuring power consumption
- Drag-and-drop Mass Storage Device (MSD) programming
- 1.7-5.0 V power supply from USB, external Li-Po battery, or CR2032 coin cell battery
For access to firmware source code, hardware schematics, and layout files, see www.nordicsemi.com.
Note: The nRF5340 DK shall be powered by a PS1 class power supply (maximum power less than 15 W).
The nRF5340 DK is intended for use only by skilled persons.
Skilled person: Person with relevant education or experience to enable him or her to identify hazards and to take appropriate actions to reduce the risks of injury to themselves and others.