The nRF21540 EK has multiple power options.
The power options are the following:
- VDD pins on P5
- VDD pins on P7
Figure 1. Power supply option P5
Figure 2. Power supply option P7
Table 1. nRF21540 EK power source
Power source |
Voltage level |
VDD |
1.7 V–3.6 V (same as GPIO pin voltage) |
The VDD for the nRF21540 EK must have the same voltage as the
General-Purpose Input/Output (GPIO) pins used to control the nRF21540 through the pin control interface/SPI interface available on the Arduino headers.
Note: Nordic recommends a maximum current input of 0.5 A.