The nPM1100 EK has multiple solder bridges for enabling or disabling functionality on the Evaluation Kit (EK). Changes to the solder bridges are not needed for normal use of the EK.
The following table is a complete overview of the solder bridges on the nPM1100 EK.
Solder bridge | Default | Function |
---|---|---|
SB1 | Closed | Cut to disconnect ERR LED |
SB2 | Closed | Cut to disconnect CHG LED |
SB3 | Closed | Cut to allow measurement of VBUS current |
SB4 | Closed | Cut to allow measurement of VBAT current |